Composition, microstructure and corrosion resistance of DED-LB additively manufactured Ti–6Al–4V alloy: Comparison with wrought alloy
Source abstract
Abstract
The titanium alloy Ti–6Al–4V is widely used in medical applications due to its favourable mechanical properties, biocompatibility, and excellent corrosion resistance . This study aims to study the composition, structure and electrochemical behaviour of additively manufactured Ti–6Al–4V alloy produced by a directed-energy deposition of powder using a laser beam (DED-LB) and compare it to wrought alloy produced by conventional metallurgy . The surface morphology and composition of the chemo-mechanically polished wrought and DED-LB samples were analysed by X-ray diffraction, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, atomic force microscopy coupled with scanning Kelvin probe force microscopy and X-ray photoelectron spectroscopy. The electrochemical behaviour was assessed using potentiodynamic polarisation and electrochemical impedance spectroscopy in three simulated physiological solutions (Hanks' balanced salt solution, NaCl, and artificial saliva) at 37 °C. Both alloys show highly protective corrosion behaviour in the tested media, confirming that DED-LB Ti–6Al–4V is a promising alternative to conventional manufacturing methods for advanced metallurgical engineering applications . The alloys exhibit similar general chemical composition but different microstructure, with a lamellar αʼ-martensitic phase in the DED-LB fabricated alloy surrounded by prior β grains contrasting equiaxed α+β structure of the wrought alloy . Differences in microstructure are related to differences in local chemical composition, which affect the course of the corrosion when polarised to high positive potentials of 6 V Ag/AgCl .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Effect of heat-treatment on microstructure and mechanical properties of Ti alloys: an overview10.1016/j.matpr.2020.02.541 ↗
2. Passive layers and corrosion resistance of biomedical Ti-6Al-4V and β-Ti alloys10.3390/coatings11050487 ↗
3. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
4. Corrosion of additively manufactured alloys: a review10.5006/2926 ↗
5. Surface texture-based surface treatments on Ti6Al4V titanium alloys for tribological and biological applications: a mini review10.3390/ma11040487 ↗
6. Improved performance of Ti6Al4V alloy in biomedical applications - review10.1088/1742-6596/1973/1/012146 ↗
7. Passive film on orthopaedic TiAlV alloy formed in physiological solution investigated by X-ray photoelectron spectroscopy10.1016/S0142-9612(00)00145-9 ↗
8. The effect of fluoride ions on the corrosion behaviour of Ti metal, and Ti–6Al–7Nb and Ti–6Al–4V alloys in artificial saliva
9. Structural analysis, electrochemical behavior, and biocompatibility of novel quaternary titanium alloy with near β Structure10.1007/s11661-014-2254-9 ↗
10. A comparative study on mechanical properties of Ti–6Al–4V alloy processed by additive manufacturing vs. traditional processing10.1016/j.msea.2021.141384 ↗
11. The mechanical coupling effect of α and β phases in Ti6Al4V alloy undergoing laser shock peening: a molecular dynamics study10.1016/j.msea.2024.147208 ↗
12. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
13. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
14. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
15. Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition10.1016/j.matdes.2016.05.045 ↗
16. Corrosion of 3D-printed orthopaedic implant materials10.1007/s10439-018-02111-1 ↗
17. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. Microstructural characterization10.1007/s11661-004-0094-8 ↗
18. An overview of 3D printed metal implants in orthopedic applications: present and future perspectives
19. Microstructure and strength of Ti-6Al-4V samples additively manufactured with TiC heterogeneous nucleation site particles10.3390/ma16175974 ↗
20. Evaluation of mechanical properties characterization of additively manufactured components10.1007/s40964-024-00700-2 ↗
21. Laser additive manufactured Ti–6Al–4V alloy: tribology and corrosion studies10.1007/s00170-017-0410-2 ↗
22. Revolutionising orthopaedic implants—a comprehensive review on metal 3D printing with materials, design strategies, manufacturing technologies, and post-process machining advancements10.1007/s00170-024-14218-y ↗
23. Corrosion, fatigue and wear of additively manufactured Ti alloys for orthopaedic implants10.1080/02670836.2023.2230417 ↗
24. Grain boundary α-phase precipitation and coarsening: Comparing selective laser melted and conventional manufactured Ti6Al4V10.1016/j.scriptamat.2021.114261 ↗
25. Structure and properties of titanium and titanium alloys
26. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
27. Directed energy deposition (DED) additive manufacturing: physical characteristics, defects, challenges and applications10.1016/j.mattod.2021.03.020 ↗
28. Laser-based directed energy deposition (DED-LB) of advanced materials10.1016/j.msea.2022.142967 ↗
29. Microstructure and texture evolution during solidification processing of Ti–6Al–4V10.1016/S0924-0136(02)00865-8 ↗
30. In situ monitoring the effects of Ti6Al4V powder oxidation during laser powder bed fusion additive manufacturing10.1016/j.ijmachtools.2023.104049 ↗
31. An overview of the process mechanisms in the laser powder energy deposition10.3390/app13010117 ↗
32. Review of in situ and real-time monitoring of metal additive manufacturing based on image processing10.1007/s00170-022-10178-3 ↗
33. In-situ monitoring laser based directed energy deposition process with deep convolutional neural network10.1007/s10845-021-01820-0 ↗
34. A review of the residual stress generation in metal additive manufacturing: analysis of cause, measurement, effects, and prevention10.3390/mi14071480 ↗
35. Laser and electron beam additive manufacturing methods of fabricating titanium bone implants10.3390/app7070657 ↗
36. Comparison study of corrosion behavior for chitosan coated Ti6Al4V alloy produced by selective laser melting and forging
37. In vitro corrosion resistance of titanium made using different fabrication methods10.1016/S0142-9612(98)00160-4 ↗
38. Corrosion behaviour and cell interaction of Ti-6Al-4V alloy prepared by two techniques of 3D printing10.1016/j.msec.2018.08.066 ↗
39. Influence of surface finishing on corrosion behaviour of 3D printed TiAlV alloy10.3390/met10111547 ↗
40. K. Karolewska, B. Ligaj, Comparison Analysis of Titanium Alloy Ti6Al4V Produced by Metallurgical and 3D Printing Method, AIP Conf. Proc. 2077 (2019) 020025. 〈https://doi.org/10.1063/1.5091886〉.10.1063/1.5091886 ↗
41. Corrosion characterization and ion release in SLM-manufactured and wrought Ti6Al4V alloy in an oral environment10.1016/j.corsci.2022.110716 ↗
42. The corrosion resistance of dental Ti6Al4V with differing microstructures in oral environments10.1016/j.jmrt.2023.10.082 ↗
43. Corrosion and tribocorrosion behaviour of Ti6Al4V produced by selective laser melting and hot pressing in comparison with the commercial alloy10.1016/j.jmatprotec.2018.11.008 ↗
44. A comparison of biocompatibility of a titanium alloy fabricated by electron beam melting and selective laser melting
45. L. Weiss, P. Acquier, L. Germain, E. Fleury, Microtexture of Ti6Al4V obtained by direct energy deposition (DED) process, in: Proc. 13th World Conf. Titan., John Wiley & Sons, Ltd, 2016: pp. 1305–1310. 〈https://doi.org/10.1002/9781119296126.ch221〉.10.1002/9781119296126.ch221 ↗
46. Microstructural evolution and microhardness of a selective-laser-melted Ti–6Al–4V alloy after post heat treatments10.1016/j.jallcom.2016.02.183 ↗
47. Effect of heat treatment on microstructure and corrosion behavior of Ti6Al4V fabricated by laser beam powder bed fusion10.1016/j.corsci.2022.110789 ↗
48. The effect of strain rate on stress corrosion performance of Ti6Al4V alloy produced by additive manufacturing process10.1016/j.jmrt.2020.02.035 ↗
49. Electrochemical properties of the heat-treated Ti-6Al-4V alloy manufactured by direct energy deposition10.1016/j.jallcom.2021.163226 ↗
50. Environment-assisted fatigue crack propagation (EAFCP) behavior of Ti64 Alloy fabricated by direct energy deposition (DED) process10.1007/s11661-022-06765-4 ↗
51. XPS analysis of Ti6Al4V oxidation under UHV conditions10.1007/s11661-014-2570-0 ↗
52. XPS characterization of surface modified titanium alloys for use as biomaterials10.1016/j.vacuum.2011.03.006 ↗
53. Review on surface-characterization applications of X-ray photoelectron spectroscopy (XPS): recent developments and challenges10.1016/j.apsadv.2022.100332 ↗
54. Standard practice for exposure of metals and alloys by alternate immersion in neutral 3.5% sodium chloride solution, 〈https://www.astm.org/g0044-21.html〉 (accessed October 7, 2024).
55. The effect of metallographic preparation on the surface characteristics and corrosion behaviour of Ti-6Al-4V alloy in simulated physiological solutions10.1149/1945-7111/ad8e89 ↗
56. Study of an annular laser beam based axially-fed powder cladding process10.1016/j.cirp.2018.04.082 ↗
57. A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties10.1016/j.jmrt.2022.04.055 ↗
58. Standard practice for microetching metals and alloys, 〈https://www.astm.org/e0407-07r15e01.html〉 (accessed October 10, 2024).
59. Directed-energy deposition of Ti-6Al-4V alloy using fresh and recycled feedstock powders under reactive atmosphere
60. B.C. Muddle J.F. Nie Encyclopedia of Materials: Science and Technology Second Edition 2001 5189 5193.https://doi.org/10.1016/B0-08-043152-6/00901-3.10.1016/B0-08-043152-6/00901-3 ↗
61. Fabrication and characterization of selective laser melting printed Ti–6Al–4V alloys subjected to heat treatment for customized implants design10.1016/j.pnsc.2016.12.006 ↗
62. Materials science and technology: a comprehensive treatment
63. Effects of cooling rate on the microstructure and tensile properties of wire-arc additive manufactured Ti–6Al–4V alloy10.1007/s12540-019-00563-1 ↗
64. Effects of annealing and solution treatments on the microstructure and mechanical properties of Ti6Al4V manufactured by selective laser melting10.3390/ma15051978 ↗
65. A review of thermal spectral imaging methods for monitoring high-temperature molten material streams10.3390/s23031130 ↗
66. The martensitic transformation and mechanical properties of Ti6Al4V prepared via selective laser melting10.3390/ma12020321 ↗
67. Corrosion resistance of selective laser melted Ti–6Al–4V alloy in salt fog environment
68. Corrosion behaviour of electron beam melted Ti6Al4V: effects of microstructural variation10.1149/1945-7111/abb9d1 ↗
69. Chemical leveling mechanism and oxide film properties of additively manufactured Ti–6Al–4V alloy10.1007/s10853-019-03855-4 ↗
70. NIST X-ray Photoelectron Spectroscopy (XPS) Database, Version 3.5, (2000). 〈https://srdata.nist.gov/xps〉/ (accessed May 6, 2018).
71. XPS and EIS study of the passive film formed on orthopaedic Ti–6Al–7Nb alloy in Hank’s physiological solution10.1016/j.electacta.2007.12.041 ↗
72. Electrochemical properties, chemical composition and thickness of passive film formed on novel Ti–20Nb–10Zr–5Ta alloy10.1016/j.electacta.2013.03.086 ↗
73. The effect of biomolecules on the behaviour of CoCrMo alloy in various simulated physiological solutions10.1016/j.electacta.2012.05.146 ↗
74. Influence of processing technology on electrochemical corrosion behavior of Ti-6Al-4V alloys10.5006/3490 ↗
75. The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution10.1016/S0142-9612(03)00252-7 ↗