Thermo-mechanical characterisation of selective laser melted Ti-5Al-5Mo-5V-1Cr-1Fe alloy under high strain rate loadings
Source abstract
Abstract
This paper investigates the thermo-mechanical response and failure behaviour of a selective laser melted (SLM) near- β Ti-5Al-5Mo-5V-1Cr-1Fe (Ti-55511) alloy under high strain rate loading. A series of dynamic compression tests were performed using a split Hopkinson pressure bar at various temperatures (293–1173 K) and strain rates (1000–5000 s −1 ). Optical microscopy (OM), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) were employed to analyse the microstructure of the specimens and fracture surfaces of failed specimens . The dynamic compression stress-strain response, strain rate effect , thermo-softening effect and work hardening effect were studied. The results showed strong temperature and strain rate dependency for SLM Ti-55511. Higher temperature led to an improved ductility for SLM Ti-55511 alloy, demonstrated by the higher number of elongated dimples on the fracture surface. A modified Johnson-Cook constitutive model was established to predict the thermo-mechanical behaviour of SLM Ti-55511 alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Effect of microstructure on the mechanical properties of Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1016/j.msea.2019.138728 ↗
2. Leyens · 2003
3. Simulation of manufacturing chain of a titanium aerospace component with experimental validation10.1016/j.finel.2011.10.002 ↗
4. Metal additive manufacturing in aerospace: a review10.1016/j.matdes.2021.110008 ↗
5. A current state of metal additive manufacturing methods: A review
6. Mechanical behavior of additive manufactured, powder-bed laser-fused materials10.1016/j.msea.2015.10.068 ↗
7. Microstructure and tensile properties of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy10.1016/j.msea.2013.08.032 ↗
8. Microstructural characterization of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy10.1016/j.jallcom.2013.03.243 ↗
9. Fatigue crack branching in laser melting deposited Ti-55511 alloy10.1016/j.ijfatigue.2019.03.006 ↗
10. Effect of primary α phase on the fatigue crack path of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy10.1016/j.ijfatigue.2018.06.041 ↗
11. Heat-treatment induced microstructural evolution and enhanced mechanical property of selective laser melted near β Ti-5Al-5Mo-5 V-3Cr-1Zr alloy10.1016/j.jallcom.2020.158351 ↗
12. Additive manufacturing of high strength near β titanium alloy Ti-55511 by engineering nanoscale secondary α laths via in-situ heat treatment10.1016/j.msea.2021.141245 ↗
13. The anisotropy of laser melting deposition additive manufacturing Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy10.1016/j.matdes.2014.11.001 ↗
14. Plastic anisotropy of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy10.1016/j.msea.2019.01.031 ↗
15. Anisotropy in microstructure and tensile properties of Ti-5Al-5Mo-5V-1Cr-1Fe produced via additive manufacturing10.1016/j.msea.2020.140093 ↗
16. Microstructure evolution and a unified constitutive model for a Ti-55511 alloy deformed in β region10.1016/j.jallcom.2021.159534 ↗
17. Obtaining heterogeneous α laths in selective laser melted Ti-5Al-5Mo-5V-1Cr-1Fe alloy with high strength and ductility10.1016/j.msea.2022.142624 ↗
18. Brittle fracture behavior of a laser additive manufactured near-β titanium alloy after low temperature aging10.1016/j.msea.2017.05.050 ↗
19. Influence of continuous grain boundary α on ductility of laser melting deposited titanium alloys10.1016/j.msea.2016.03.034 ↗
20. Shear localization and recrystallization in high strain rate deformation in Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1016/j.matlet.2018.08.095 ↗
21. Dynamic shear deformation and failure of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy10.1016/j.msea.2017.03.114 ↗
22. High-strain-rate plastic deformation and fracture behaviour of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy at room temperature10.1016/j.mechmat.2017.08.007 ↗
23. Adiabatic shear localization in a near β Ti-5Al-5Mo-5 V-1Cr-1Fe alloy10.1016/j.msea.2015.05.043 ↗
24. Quasi-static and dynamic forced shear deformation behaviors of Ti-5Mo-5V-8Cr-3Al alloy10.1016/j.msea.2017.03.005 ↗
25. Influence of strain rates on high temperature deformation behaviors and mechanisms of Ti-5Al-5Mo-5V-3Cr-1Zr alloy10.1016/j.matchar.2020.110794 ↗
26. Thermo-mechanical characterization and dynamic failure of near α and near β titanium alloys10.1016/j.msea.2018.05.007 ↗
27. Effect of build orientation on dynamic compressive behaviour of ti-6al-4v alloy fabricated by selective laser melting10.1016/j.msea.2022.144440 ↗
28. Oxidation behavior and effect of oxidation on microstructure and tensile properties of Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1016/j.jallcom.2013.06.131 ↗
29. Compressive properties and micro-structural characteristics of Ti-6Al-4V fabricated by electron beam melting and selective laser melting10.1016/j.msea.2019.138204 ↗
30. Dynamic mechanical properties and failure characteristics of electron beam melted Ti-6Al-4V under high strain rate impact loadings10.1016/j.msea.2020.139794 ↗
31. Plastic deformation and fracture behaviour of ti-6al-4v alloy loaded with high strain rate under various temperatures10.1016/S0921-5093(97)00471-1 ↗
32. Dodd, B., Bai, Y., Introduction to Adiabatic Shear Localization (revised edition), 2014.10.1142/p934 ↗
33. Microstructural characteristics and formation mechanism of adiabatic shear bands in al-zn-mg-cu alloy under dynamic shear loading10.1016/j.msea.2020.139430 ↗
34. Huang · 2006
35. Stress wave effects and their mechanisms on stress-strain curves in the elastic phase of shpb tests
36. Mechanical properties and deformation mechanisms of a commercially pure titanium10.1016/S1359-6454(99)00203-7 ↗
37. Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions
38. A strain rate and temperature-dependent crystal plasticity model for hexagonal close-packed (hcp) materials: Application to α-titanium10.1016/j.ijplas.2022.103281 ↗
39. Hot deformation of ti-5al-5mo-5v-1cr-1fe near β titanium alloys containing thin and thick lamellar α phase10.1016/j.msea.2013.02.033 ↗
40. Effects of microstructure on the dynamic properties of TA15 titanium alloy10.1016/j.mechmat.2019.103121 ↗
41. Study on dynamic mechanical properties and constitutive model construction of tc18 titanium alloy, Metals 10(1), 2020: 44..10.3390/met10010044 ↗