journal article·2025-02Open access

Wire-arc directed energy deposition of NiTiCu on NiTi substrate: Microstructure and shape memory behavior

Yasamin Khebreh Farshchi, Farzad Khodabakhshi, Maryam Mohri, Hassan Shirazi, Mahmoud Nili-Ahmadabadi

Abstract

Wire-arc directed energy deposition (DED) is an additive manufacturing technique gaining attention for its ability to produce complex composite structures efficiently and cost-effectively. In this study, a 0.8 mm Ni 45 Ti 50 Cu 5 wire was used to print a wall on a Ni 50.8 Ti 49.2 substrate, forming a NiTi/NiTiCu bi-layer and a 4-layer Ni 45 Ti 50 Cu 5 wall. The research focused on the effects of post heat treatment on the structure, precipitations, phase transformation temperatures, and mechanical properties of the WAAM-deposited NiTiCu wall including the interface. The study found that continuous Ti 2 Ni precipitates reduced mechanical properties, but heat treatments such as homogenization at 1000°C and aging at 450°C improved shape memory and pseudoelastic properties. The homogenization-aging heat treatment resulted in the globularization of the continuous Ti 2 Ni phase and precipitation of coherent (Ni-Cu) 4 Ti 3 in the Ni-rich regions, which showed the best shape memory effect and pseudoelastic properties. The bi-layer specimen showed the best combination of pseudoelastic effect (PE) of up to ∼20 % and shape memory effect (SME) of up to ∼65 %, after homogenization and aging, while the final Ni 45 Ti 50 Cu 5 printed layer demonstrated a strain recovery of about 90 %. • A defect-free Ni 45 Ti 50 Cu 5 wall was printed on a Ni 50 . 8 Ti 49 . 2 substrate by using wire-arc directed energy deposition. • After printing the first layer, a region of the substrate was melted and in the interface region of wall and substrate, bi-layer with austenite and martensite microstructure was formed. • Two-stage heat treatments dispersed integrated Ti 2 Ni precipitates and encouraged (Ni-Cu) 4 Ti 3 precipitations, showed coherent interface with matrix which has led to improved mechanical properties. • The interface region of the Hom-Age condition shows simultaneous PE (20 %) and SME (65 %), and the final printed layer demonstrated a strain recovery of about 90 %.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Material Selection and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Additive manufacturing of metallic components–process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
2. Correlating microstructure and superelasticity of directed energy deposition additive manufactured Ni-rich NiTi alloys10.1016/j.jallcom.2017.12.270 ↗
3. Spatial characterization of the thermal-induced phase transformation throughout as-deposited additive manufactured NiTi bulk builds10.1016/j.scriptamat.2015.01.018 ↗
4. Multi-scale shape memory effect recovery in NiTi alloys additive manufactured by selective laser melting and laser directed energy deposition10.1016/j.jmatprotec.2017.06.027 ↗
5. Wire and arc additive manufacturing of metal components: a review of recent research developments10.1007/s00170-020-05966-8 ↗
6. Microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy10.1016/j.matdes.2020.109007 ↗
7. Microstructure and mechanical properties of high strength steel deposits obtained by wire-arc additive manufacturing10.1016/j.jmatprotec.2020.116759 ↗
8. Microstructural engineering in carbon steel walls printed by directed energy deposition to enhance mechanical properties through heat-input control10.1016/j.jmrt.2023.11.280 ↗
9. Application of titanium nickelide-based alloys in engineering
10. Biomedical applications of shape memory alloys
11. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
12. Multi-scale pseudoelasticity of NiTi alloys fabricated by laser additive manufacturing10.1016/j.msea.2021.141600 ↗
13. Progress in the understanding of NiTi shape memory alloys10.1007/s12666-008-0076-4 ↗
14. Microstructures and mechanical properties of equiatomic NiTi shape memory alloy undergoing local canning compression and subsequent annealing10.1007/s12540-021-00966-z ↗
15. Structure, martensitic transformations and mechanical behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing10.1016/j.jallcom.2020.156851 ↗
16. High superelasticity NiTi fabricated by cold metal transfer based wire arc additive manufacturing10.1016/j.msea.2022.143001 ↗
17. Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: microstructure and mechanical properties
18. Martensitic transformation, microstructure and functional behavior of thin-walled Nitinol produced by micro laser metal wire deposition10.1016/j.jmrt.2021.03.108 ↗
19. Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy
20. The effect of substrate and arc voltage on the structure and functional behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing10.1016/j.jmapro.2021.08.026 ↗
21. Influence of heat treatment on the structure and martensitic transformation in NiTi alloy produced by wire arc additive manufacturing10.1016/j.mtla.2021.101238 ↗
22. Effect of solution treatment and aging on microstructural evolution and mechanical behavior of NiTi shape memory alloy10.1016/S1003-6326(13)62914-3 ↗
23. Effect of annealing on the transformation behavior and superelasticity of NiTi shape memory alloy10.1016/S1359-6462(01)01005-3 ↗
24. Revisiting fundamental welding concepts to improve additive manufacturing: from theory to practice10.1016/j.pmatsci.2019.100590 ↗
25. Grain morphology evolution and texture characterization of wire and arc additive manufactured Ti-6Al-4V10.1016/j.jallcom.2018.07.235 ↗
26. Phase transformation and structure of functionally graded Ni–Ti bi-layer thin films with two-way shape memory effect10.1016/j.sna.2015.03.014 ↗
27. On the microstructure and mechanical properties of a two-way shape memory NiTi/NiTiCu bi-layer diaphragm10.1016/j.matdes.2019.108464 ↗
28. A combined analytic, numeric, and experimental investigation performed on NiTi/NiTiCu bi-layer composites under tensile loading10.1002/adem.201700395 ↗
29. Manufacture of shape memory alloys NiTi and NiTiCu by casting method and studying the effect of adding the copper element in different proportions to the binary alloy on the microstructure, phase transformations and conductivity
30. NiTiCu shape memory alloys with ultra-low phase transformation range as solid-state phase change materials10.1016/j.actamat.2023.119310 ↗
31. A review on NiTiCu shape memory alloys: manufacturing and characterizations
32. Investigations on phase transformation and mechanical characteristics of laser additive manufactured TiNiCu shape memory alloy structures10.1016/j.jmatprotec.2016.07.012 ↗
33. Toward additive manufactured crack-free NiTiCu shape memory alloys with low-hysteresis and tailorable phase transition behavior supported by theoretical design
34. NiTiCu alloy from elemental and alloyed powders using vat photopolymerization additive manufacturing
35. M. Memarian et al., Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion, Advanced Engineering Materials, vol. n/a, no. n/a, p. 2400002.
36. Optimisation of thickness of miniature tensile specimens for evaluation of mechanical properties10.1016/j.msea.2016.08.032 ↗
37. CMT-based wire arc additive manufacturing using 316L stainless steel: effect of heat accumulation on the multi-layer deposits10.3390/met10020278 ↗
38. Influence of microstructure on phase transformation behavior and mechanical properties of plasma arc deposited shape memory alloy10.1016/j.msea.2018.08.098 ↗
39. Microstructure and transformation behavior of in-situ shape memory alloys by selective laser melting Ti–Ni mixed powder10.1016/j.jmst.2013.05.006 ↗
40. Microstructural aspects of precipitation and martensitic transformation in a Ti-rich Ni-Ti alloy10.1016/1359-6462(95)00570-6 ↗
41. Peculiarities of the recoverable strain variation in the NiTi alloy produced by wire arc additive manufacturing10.1016/j.matlet.2021.130004 ↗
42. Location dependence of microstructure, phase transformation temperature and mechanical properties on Ni-rich NiTi alloy fabricated by wire arc additive manufacturing10.1016/j.msea.2019.02.029 ↗
43. Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy10.1016/j.msea.2023.144897 ↗
44. Porter · 2009
45. Functional and mechanical properties of As-deposited and heat treated WAAM-built NiTi shape-memory alloy10.3390/met12061044 ↗
46. Enhancement in corrosion and electrical wear resistance of copper via laser surface alloying with NiTi10.1016/j.surfcoat.2020.126804 ↗
47. Thermodynamic and kinetic simulations used for the study of the influence of precipitates on thermophysical properties in NiTiCu alloys obtained by spark plasma sintering10.3390/nano14050461 ↗
48. TEM and HREM study of the interphase interface structure of Ti3Ni4 precipitates and parent phase in an aged TiNi shape memory alloy10.1016/S0921-5093(96)10418-4 ↗
49. Instrumented micro-indentation of NiTi shape-memory alloys10.1016/S1359-6454(01)00223-3 ↗
50. Cyclic deformation mechanisms in precipitated NiTi shape memory alloys10.1016/S1359-6454(02)00315-4 ↗
51. Crystallization study of amorphous sputtered NiTi bi-layer thin film10.1016/j.matchar.2015.03.017 ↗
52. Deformation behavior and microstructure evolution of NiTiCu shape memory alloy subjected to plastic deformation at high temperatures10.3390/met7080294 ↗
53. Transformation twinning and deformation twinning of NiTi shape memory alloy10.1016/j.msea.2016.02.066 ↗
54. Morphology and crystallography of β′ martensite in TiNi alloys10.2320/matertrans1960.14.292 ↗
55. The crystallography of the martensitic transformation in equiatomic nickel-titanium10.1016/0001-6160(81)90091-2 ↗
56. Electron microscopy study of twins in martensite in a Ti-50.0 at% Ni alloy10.2320/matertrans1989.33.354 ↗
57. The four-step multiple stage transformation in deformed and annealed Ti49Ni51 shape memory alloy10.1016/j.actamat.2003.10.044 ↗
58. New modelling of the B2 phase and its associated martensitic transformation in the Ti–Ni system10.1016/S1359-6454(99)00193-7 ↗
59. Influence of the recovery and recrystallization processes on the martensitic transformation of cold worked equiatomic Ti–Ni alloy10.1016/S0921-5093(03)00068-6 ↗
60. On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi10.1016/j.actamat.2017.10.072 ↗
61. Effect of annealing temperature on surface morphology and mechanical properties of sputter-deposited Ti–Ni thin films10.1016/j.jallcom.2006.02.067 ↗
62. Interaction between microstructure and multiple-step transformation in binary NiTi alloys using in-situ transmission electron microscopy observations10.1080/01418619808241907 ↗
63. Ni4Ti3-precipitation during aging of NiTi shape memory alloys and its influence on martensitic phase transformations10.1016/S1359-6454(02)00257-4 ↗
64. Texture, aging, and superelasticity of selective laser melting fabricated Ni-rich NiTi alloys10.1016/j.msea.2017.01.008 ↗
65. Molecular dynamics modeling of NiTi superelasticity in presence of nanoprecipitates10.1016/j.ijplas.2016.01.011 ↗
66. Comparative study on crystallographic orientation, precipitation, phase transformation and mechanical response of Ni-rich NiTi alloy fabricated by WAAM at elevated substrate heating temperatures10.1016/j.msea.2020.140307 ↗
67. A hidden single-stage martensitic transformation from B2 parent phase to B19′ martensite phase in an aged Ni51Ti49 alloy10.1016/j.matlet.2019.06.055 ↗
68. The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron10.1007/BF02642799 ↗
69. Martensitic transformation and shape memory behavior in sputter-deposited TiNi-base thin films10.1016/S0921-5093(99)00292-0 ↗
70. A combined analytic, numeric, and experimental investigation performed on NiTi/NiTiCu bi-layer composites under tensile loading10.1002/adem.201700395 ↗
71. Microstructural study and simulation of intrinsic two-way shape memory behavior of functionally graded Ni-rich/NiTiCu thin film10.1016/j.matchar.2017.11.056 ↗
72. Dependence of aging parameters on precipitation behavior, martensitic transformation and mechanical properties of the aged Ni-Ti alloy under super high pressure10.1016/j.msea.2018.09.019 ↗
73. A comparative study of a NiTi alloy subjected to uniaxial monotonic and cyclic loading-unloading in tension using digital image correlation: the grain size effect10.1016/j.jallcom.2018.11.050 ↗
74. Evolution of Ti2Ni precipitations during annealing and their effects on properties of Ti–Nb–Ni foil as PEMFC bipolar plates substrate10.1016/j.ijhydene.2023.01.009 ↗
75. Gradient deformation behavior of NiTi alloy by ageing treatment10.1016/j.jallcom.2014.08.070 ↗
76. Microstructure and mechanical properties of NiTi-SS bimetallic structures built using wire arc additive manufacturing10.1016/j.matlet.2021.130499 ↗
77. Structure of a 3D frame-bridge NiTi sample deposited on a low carbon steel substrate by wire arc additive manufacturing10.22226/2410-3535-2020-4-496-500 ↗