Fabrication and testing of ceramic thermoelectric multi-leg module for high-temperature energy conversion
Source abstract
Abstract
This study investigates the fabrication and performance of ceramic-based thermoelectric modules for high-temperature energy conversion, based on Ca 2.93 Sr 0.07 Co 4 O 9 and Ca 0.91 Y 0.03 La 0.03 Yb 0.03 MnO 3 p- and n-type materials. The p-type materials were prepared through attrition milling and classical sintering, while ball milling and hot uniaxial pressing were used for the n-type legs. The power factor reached 0.62 mW/(K 2 m) for the p-type and 0.33 mW/(K 2 m) for the n-type materials at 800 °C, being comparable to some of the best-reported values in literature. The lower thermal conductivity of n-type material (1.24 W/K/m) compared to the p-type material (1.56 W/K/m) resulted in similar ZT values for n-type (0.29) and p-type (0.43). The thermal expansion behaviour of the materials was also evaluated, demonstrating good thermal compatibility between the p- and n-type legs. The module's performance was tested at hot-side temperatures up to 900 °C, yielding a power density of 34 W/m 2 . Moreover, the module demonstrated an energy conversion efficiency of 0.8% (actual) and 6% (theoretical), thereby underscoring the practical potential of these materials. Additionally, the module exhibited excellent long-term thermal stability, maintaining its performance after 2000 h of exposure at 900 °C and after undergoing 100 thermal cycles, demonstrating its suitability for high-temperature energy recovery applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heusler alloys: electronic and magnetic properties · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Thermoelectric generators: a review of applications10.1016/j.enconman.2017.02.070 ↗
2. A comprehensive review of thermoelectric technology: materials, applications, modelling and performance improvement10.1016/j.rser.2016.07.034 ↗
3. Thermoelectrics based on strontium titanate10.1016/S1369-7021(07)70244-4 ↗
4. The thermoelement as thermoelectric power generator: effect of leg geometry on the efficiency and power generation
5. ScienceDirect Current progress and future challenges in thermoelectric power generation: from materials to devices10.1016/j.actamat.2014.12.042 ↗
6. A review on thermoelectric Generators: progress and applications10.3390/en13143606 ↗
7. Thermoelectric materials and applications: a review10.3390/en16176409 ↗
8. Thermoelectric energy harvesting: basic principles and applications
9. Development and applications of thermoelectric oxide ceramics and devices10.3390/en16114475 ↗
10. The importance of the assembly in thermoelectric generators
11. Evaluation of thermoelectric modules for power generation10.1016/S0378-7753(97)02801-2 ↗
12. Significant enhancement of the thermoelectric performance in Ca3Co4O9 thermoelectric materials through combined strontium substitution and hot-pressing process10.1016/j.jeurceramsoc.2018.12.049 ↗
13. Enhanced thermoelectric properties of Ca3Co4O9+δ ceramics by Sr substitution10.1016/j.solidstatesciences.2020.106190 ↗
14. Improvement of thermoelectric properties of Ca3Co4O9 using soft chemistry synthetic methods10.1016/j.jeurceramsoc.2012.02.012 ↗
15. Effect of B-site doping on the thermoelectric performances of Ca0.97Y0.01La0.01Yb0.01Mn1-2xNbxMoxO3 thermoelectric ceramics10.1016/j.jeurceramsoc.2023.12.067 ↗
16. Remarkable variation in microstructural, thermoelectric, and magnetic properties of CaMnO3 through Ce doping10.1016/j.mseb.2023.116986 ↗
17. Y and La doping in CaMnO3 compounds: effects of dopant identity and amount on charge transport kinetics
18. Improved thermoelectric performance in Pr and Sr Co-doped CaMnO3 materials10.1016/j.jallcom.2019.07.188 ↗
19. Effects of Pr and Yb dual doping on the thermoelectric properties of CaMnO3
20. Effect of Y, La, and Yb simultaneous doping on the thermal conductivity and thermoelectric performances of CaMnO3 ceramics10.1016/j.jallcom.2023.170201 ↗
21. Thermoelectrical properties of A -site substituted Ca1-xRexMnO3 system10.1063/1.2362922 ↗
22. Effects of Dy and Yb co-doping on thermoelectric properties of CaMnO3 ceramics10.1016/j.ceramint.2014.09.089 ↗
23. Improved thermoelectric property of cation-substituted CaMnO310.1088/1674-1056/24/9/098101 ↗
24. The effects of dual-doping and fabrication route on the thermoelectric response of calcium cobaltite ceramics10.1016/j.jallcom.2022.163819 ↗
25. Electrical properties of Dy3+/Na+Co-doped oxide thermoelectric [Ca1-x(Na1/2Dy1/2)x]MnO3 ceramics10.1016/j.jallcom.2016.04.158 ↗
26. Growth rate effects on the thermoelectric performance of CaMnO3-based ceramics10.1016/j.jeurceramsoc.2019.06.011 ↗
27. Development of multilayer textured Ca3Co4O9 materials for thermoelectric generators: Influence of the anisotropy on the transport properties10.1016/j.jeurceramsoc.2012.03.022 ↗
28. Effect of Sr substitution for Ca on the Ca3Co4O9 thermoelectric properties10.1016/j.jallcom.2013.07.005 ↗
29. "Role of Bi doping in thermoelectric properties of CaMnO310.1016/j.jallcom.2014.12.141 ↗
30. Physical, mechanical, and structural properties of highly efficient nanostructured n-and p-silicides for practical thermoelectric applications10.1007/s11664-013-2848-9 ↗
31. Characterization of the thermo-mechanical properties of p-type (MnSi1.77) and n-type (Mg2Si0.6Sn0.4) thermoelectric materials10.1016/j.scriptamat.2019.06.037 ↗
32. Manufacturing and performances of silicide-based thermoelectric modules10.1016/j.enconman.2021.114304 ↗
33. Fabrication and properties of four-leg oxide thermoelectric modules10.1088/0022-3727/38/19/026 ↗
34. Thermoelectric ceramics for generators10.1016/j.jeurceramsoc.2007.05.012 ↗
35. Performance measurement and analysis of a thermoelectric power generator
36. Thermoelectric modules built using ceramic legs grown by laser floating zone10.1016/j.ceramint.2020.06.213 ↗
37. Monolithic thermoelectric devices prepared with multilayer cofired ceramics technology10.1143/JJAP.49.096505 ↗
38. Fabrication and testing of a tubular thermoelectric module based on oxide elements10.1007/s11664-018-6150-8 ↗
39. Enhancing thermoelectric output power via radiative cooling with nanoporous alumina10.1016/j.nanoen.2019.104060 ↗
40. Oxide-based thermoelectric power generation module using p-type Ca3Co4O9 and n-type (ZnO)7In2O3 legs10.1016/j.enconman.2010.07.005 ↗
41. Comparison of an analytical hierarchy process and fuzzy axiomatic design for selecting appropriate photovoltaic modules for onboard vehicle design
42. Conversion efficiency of skutterudite-based thermoelectric modules10.1039/C4CP01582G ↗
43. Power generation from nanostructured PbTe-based thermoelectrics: comprehensive development from materials to modules10.1039/C5EE02979A ↗