Microstructural modification in an Al-Mg-Si (6082) alloy with high Fe content using inoculation and/or high-intensity ultrasonication
Source abstract
Abstract
In this study, the effects of solute Ti, chemical grain refiner (GR), and ultrasonication (UT) on the solidification behaviour and microstructure of a 6xxx (Al-1.0Mg-1.0Si) alloy with 1.0 wt.% Fe impurity were examined. Primary-Al grains and eutectic Fe-intermetallic compounds (Fe-IMCs), predominantly α − Al 8 Fe 2 Si/ β − Al 9 Fe 2 Si 2 , were identified as the major phases through thermodynamic prediction and microstructural observation. The results show that UT treatment produced the finest and most uniform microstructure, improving both grain refinement and Fe-IMC distribution, particularly compared to chemical methods. UT, when combined with GR, enhanced TiB 2 dispersion and improved the nucleation of both Al grains and Fe-IMCs, leading to better refinement of the Fe-IMCs. Chemical inoculation also showed some effect, but UT consistently displayed finer, more uniform microstructures, and less aggregation of TiB 2 particles. Although TiB 2 particles appear to help nucleation of Fe-IMCs, refinement and distribution of the IMCs was primarily contributed by the size and distribution of intergranular liquid pockets, and consequently, the refinement of the Al-grain structure. Overall, the study highlights that UT, in combination with GR and TiB 2 , significantly improves the microstructure and controls Fe-IMC formation in high Fe 6xxx alloys, offering a promising approach for refining Al-Mg-Si alloys with high Fe content. • Primary Al grains and Fe-IMCs are refined via solute, inoculation, and ultrasonication (UT). • Ultrasonication produces better refinement of Al grains and Fe-IMCs compared to chemical routes. • Al grain refinement contributes Fe-IMC refinement through refining and dispersing intergranular liquid pockets, effectively restricting growth of IMCs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Hatch · 1984
2. Effects of Fe, Mn, chemical grain refinement and cooling rate on the evolution of Fe intermetallics in a model 6082 Al-alloy10.1016/j.intermet.2021.107132 ↗
3. Y. Zhou, “Solidification behaviour of Fe-rich intermetallic compounds in aluminium alloys,” 2018, [Online]. Available: 〈http://bura.brunel.ac.uk/handle/2438/15965〉.
4. The effect of iron and manganese on the formation of intermetallic compounds in aluminum-silicon alloys10.1016/S0921-5093(04)00832-9 ↗
5. Effect of Mn and Sr on intermetallics in Fe-rich eutectic Al-Si alloy10.1080/13640461.2002.11819459 ↗
6. Preparation of Al3Ti-Al2O3/Al Inoculant and Its Inoculation Effect on Al-Cu-Mn Alloy10.3390/ma16155264 ↗
7. Enhancement of mechanical properties in high silicon gravity cast AlSi9Mg alloy refined by Al3Ti3B master alloy10.1016/j.msea.2017.06.005 ↗
8. Grain refining mechanism in the Al/Al-Ti-B system10.1016/j.actamat.2014.10.055 ↗
9. Solidification of aluminium alloys under ultrasonication: an overview10.1007/s12666-018-1446-1 ↗
10. Effect of cavitation melt treatment on the structure refinement and property improvement in cast and deformed hypereutectic Al-Si alloys10.4028/www.scientific.net/MSF.242.65 ↗
11. Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al-0.4Ti alloy10.1016/j.jcrysgro.2015.11.034 ↗
12. Influence of cooling rate on the Fe intermetallic compound formation in an AA6063 Al alloy10.1016/j.jallcom.2012.12.077 ↗
13. The role of grain refiner in the nucleation of alfesi intermetallic phases during solidification of a 6xxx aluminum alloy10.1007/s11661-019-05447-y ↗
14. H.R. Kotadia, Solidification behaviour of Al-Sn-Cu immiscible alloys and Al-Si cast alloys processed under intensive shearing, no. 2010, [Online]. Available: 〈http://bura.brunel.ac.uk/handle/2438/4517〉.
15. Solidification of Al-Sn-Cu based immiscible alloys under intense shearing10.1007/s11661-009-9918-x ↗
16. Effect of temperature and acoustic pressure during ultrasound liquid-phase processing of graphite in water10.1007/s11837-021-04910-9 ↗
17. Effects of Bi modification and ultrasonic treatment on microstructure evolution and mechanical properties of AlMg5Si2Mn alloy10.1016/j.jallcom.2021.163486 ↗
18. A comparative study of ternary Al-Sn-Cu immiscible alloys prepared by conventional casting and casting under high-intensity ultrasonic irradiation10.1016/j.matchemphys.2011.09.020 ↗
19. Effect of ultrasonication on the solidification microstructure in al and mg-alloys
20. Solidification behavior of intensively sheared hypoeutectic Al-Si alloy liquid10.1007/s11661-010-0516-8 ↗
21. Structure formation and macrosegregation under different process conditions during DC casting10.1016/j.msea.2004.05.066 ↗
22. Broad prospects for commercial application of the ultrasonic (cavitation) melt treatment of light alloys10.1016/S1350-4177(00)00074-2 ↗
23. Todaro · 2019
24. Revisiting the role of peritectics in grain refinement of Al alloys10.1016/j.actamat.2012.09.075 ↗
25. Zhou · 2018
26. Grain refinement of aluminium by titanium diboride particles The importance of nucleation, growth restriction, and cooling rate
27. Asia/Pacific Big Data and Cognitive/Artificial Intelligence Systems and Content Analytics10.1007/BF02708630 ↗
28. Effect of alloy variables on grain refinement of binary aluminium alloys with Al–Ti–B10.1179/mst.1995.11.6.533 ↗
29. An analytical approach for predicting as-cast grain size of inoculated aluminum alloys10.1016/j.actamat.2015.08.006 ↗
30. Ultrasonication an intensifying tool for preparation of stable nanofluids and study the time influence on distinct properties of graphene nanofluids – a systematic overview10.1016/j.ultsonch.2021.105479 ↗
31. Influence of titanium diboride particle size on structure and mechanical properties of an Al-Mg alloy
32. An Al-Fe intermetallic compound phase formed during controlled solidifciation10.1016/0036-9748(81)90301-X ↗
33. Influence of Si and Fe on the distribution of intermetallic compounds in twin-roll cast Al-Mn-Zr alloys10.1016/j.jallcom.2011.11.101 ↗
34. Heterogeneous nucleation of α-Al grain on primary α-AlFeMnSi intermetallic investigated using 3d sem ultramicrotomy and HRTEM10.1007/s11661-014-2346-6 ↗
35. In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification10.1016/j.actamat.2014.07.018 ↗
36. Dendrite growth morphologies in aluminium alloys10.1016/S1359-6454(98)00308-5 ↗
37. Morphology of intermetallic compounds in Al-Si-Fe alloy and its control by ultrasonic vibration10.2320/matertrans.F-MRA2007874 ↗
38. Investigations on the solidification behavior of Al-Fe-Si alloy in an alternating magnetic field10.2320/matertrans.47.2092 ↗
39. Influence of Al grain structure on Fe bearing intermetallics during DC casting of an Al-Mg-Si alloy10.1016/j.matchar.2016.09.017 ↗
40. The role of grain boundary diffusion in the solute drag effect10.3390/nano11092348 ↗
41. Which wets TiB2 inoculant particles: Al or Al3Ti?10.1016/j.jallcom.2015.12.203 ↗
42. Formation of the Fe-containing intermetallic compounds during Solidification of Al-5Mg-2Si-0.7Mn-1.1Fe Alloy10.1007/s11661-018-4591-6 ↗
43. Effect of Fe Intermetallics on Microstructure and Properties of Al-7Si Alloys10.1007/s11837-019-03444-5 ↗
44. Evolution of Fe bearing intermetallics during DC casting and homogenization of an Al-Mg-Si Al alloy10.1007/s11661-016-3451-5 ↗