journal article·2025-01

Microstructural evolution and mechanisms for improved performance of powder metallurgy Ti-6Al-4V alloys after thermal deformation and heat treatment

Shangxing Qiu, Fang Yang, Wanyu Wang, Shihao Chen, Ren Zhang, Wenqiang Yang, Yuping Dong, Wenjing Zhang, Cunguang Chen, Zhimeng Guo

Publisher page

Abstract

The Ti-6Al-4V alloy prepared through powder metallurgy forging and heat treatment has been investigated to explore the relationship between microstructure evolution and mechanical properties. Post-forging spheroidization, primarily caused by grain rotation, has been significantly linked to improved elongation. In contrast, heat treatment is mainly facilitated by the synergistic effect of element concentration gradients, resulting in a notable ultimate tensile strength of 1201 MPa with an elongation of 12.3%. The improvements are due to the combined effects of interface strengthening at the αs/αp interfaces, the formation of hexagonal dislocations in the αp phase, and the synergistic plastic deformation between the αp and αs phases. Additionally, the primary slip system is identified as the pyramidal slip in the alloys both before and after heat treatment, due to a decrease in the critical resolved shear stress and a reduced c/a ratio from element redistribution, respectively. These findings offer critical insights into the spheroidization mechanisms of Ti-6Al-4V, supporting the development of advanced material structure design and processing techniques for industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
2. Fabrication and characterization of Ti6Al4V/TiB2–TiC composites by powder metallurgy method10.1007/s12598-016-0732-5 ↗
3. In situ observation of texture and microstructure evolution during rolling and globularization of Ti–6Al–4V10.1016/j.actamat.2012.11.037 ↗
4. Hot working of commercial Ti–6Al–4V with an equiaxed α–β microstructure: materials modeling considerations10.1016/S0921-5093(00)00741-3 ↗
5. The role of deformation mode on dynamic restoration during hot working of a near-gamma titanium aluminide alloy10.1098/rsta.1999.0386 ↗
6. Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: a review10.1016/j.jmst.2019.07.052 ↗
7. Effect of hot rolling on structure and mechanical properties of Ti-6Al-4V alloy parts produced by direct laser deposition10.1007/s00170-020-05132-0 ↗
8. Twin-based martensite stabilizing and improving the shape memory response of near equiatomic NiTi alloy through multi-axial forging10.1016/j.jmrt.2021.11.094 ↗
9. Effect of initial microstructure and beta phase evolution on dynamic recrystallization behaviour of Ti6Al4V alloy - An EBSD based investigation10.1016/j.jallcom.2019.04.183 ↗
10. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
11. Spheroidization of the lamellar microstructure in Ti–6Al–4V alloy during warm deformation and annealing10.1016/j.actamat.2011.03.037 ↗
12. Modification of alpha morphology in Ti-6Al-4V by thermomechanical processing10.1007/BF02644991 ↗
13. Microstructural evolution of a Ti-6Al-4V alloy produced by forging process combined with torsional motion10.1016/j.jmapro.2020.09.019 ↗
14. The origins of heterogeneous deformation during primary hot working of Ti–6Al–4V10.1016/S0749-6419(01)00057-2 ↗
15. Mechanisms of globularization of Ti-6Al-4V during static heat treatment10.1007/s11661-003-0103-3 ↗
16. Evolution of microstructure and mechanical properties of Ti6Al4V alloy by multiple passes of constrained groove pressing at elevated temperature10.1016/j.jmatprotec.2020.116891 ↗
17. An overview of tailoring strain delocalization for strength-ductility synergy10.1016/j.pmatsci.2020.100675 ↗
18. Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V
19. Effect of hot working and post-deformation heat treatment on microstructure and tensile properties of Ti-6Al-4V alloy10.1016/S1003-6326(11)60922-9 ↗
20. Variant selection and intervariant crystallographic planes distribution in martensite in a Ti–6Al–4V alloy10.1016/j.actamat.2014.06.064 ↗
21. Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures10.1016/j.scriptamat.2019.07.015 ↗
22. Slip transmission behavior across α/β interface and strength prediction with a modified rule of mixtures in TC21 titanium alloy10.1016/j.jallcom.2017.07.002 ↗
23. Research progress on hot deformation behavior of high-strength β titanium alloy: flow behavior and constitutive model10.1007/s12598-021-01861-7 ↗
24. Mechanical twinning and texture evolution in severely deformed Ti–6Al–4V at high temperatures10.1016/j.actamat.2006.04.007 ↗
25. Phase transition, microstructure and mechanical properties of TC4 titanium alloy prepared by plasma activated sintering10.1016/j.jallcom.2018.01.197 ↗
26. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion10.1016/j.actamat.2018.07.014 ↗
27. Five-parameter intervariant boundary characterization of martensite in commercially pure titanium10.1016/j.actamat.2018.05.023 ↗
28. Variant selection of grain boundary α by special prior β grain boundaries in titanium alloys10.1016/j.actamat.2014.05.003 ↗
29. Formation of a transition V-rich structure during the α' to α + β phase transformation process in additively manufactured Ti-6Al-4V10.1016/j.actamat.2022.118104 ↗
30. Sustaining an excellent strength–ductility combination for Ti–6Al–4V alloy prepared from elemental powder blends10.1016/j.jmrt.2023.01.231 ↗
31. Effect of β (110) texture intensity on α-variant selection and microstructure morphology during β→α transformation in near α titanium alloy10.1016/j.actamat.2016.12.069 ↗
32. Effect of heat treatment on the crystallographic orientation evolution in a near-α titanium alloy Ti6010.1016/j.actamat.2017.04.007 ↗
33. Nanostructured aluminium alloys produced by severe plastic deformation: new horizons in development10.1016/j.msea.2012.09.020 ↗
34. Micro- and macro-approach to the fatigue crack growth in progressively drawn pearlitic steels at different R-ratios10.1016/j.ijfatigue.2009.02.005 ↗
35. Toughness and ductility improvement of heavy EH47 plate with grain refinement through inter-pass cooling10.1016/j.msea.2018.07.001 ↗
36. Microstructure and deformation behavior of Ti-6Al-4V alloy by high-power laser solid forming10.1016/j.actamat.2017.04.026 ↗
37. A review on superplastic forming of Ti-6Al-4V and other titanium alloys
38. Understanding the microstructure formation of Ti-6Al-4V during direct laser deposition via in-situ thermal monitoring10.1007/s11837-015-1767-z ↗
39. Microstructure and properties of gradient nitrided layer on Ti6Al4V alloys10.1007/s12598-022-02122-x ↗
40. Evolution of recrystallisation texture and microstructure in low alloyed titanium sheets10.1016/S1359-6454(01)00427-X ↗
41. Mechanical characteristics, failure regularities, and dimple structures on failure surfaces of Ti–6Al–4V ‘ELI’ ultrafine-grained alloy at temperatures from 300 to 4.2K10.1016/j.msea.2008.06.050 ↗
42. Spall studies on Ti-6Al-4V10.1016/0025-5416(87)90469-1 ↗
43. Analysis of crystallographic orientation and morphology of microstructure during hot working for an alpha/beta titanium alloy10.1016/j.jmst.2020.06.002 ↗
44. Shape instabilities of plate-like structures—I. Experimental observations in heavily cold worked in situ composites10.1016/0001-6160(89)90059-X ↗
45. Microstructure and texture evolution during sub-transus thermomechanical processing of Ti-6Al-4V-0.1B alloy: part I. hot rolling in (α + β) phase field10.1007/s11661-013-1672-4 ↗
46. Slip transfer and deformation structures resulting from the low cycle fatigue of near-alpha titanium alloy Ti-6242Si10.1016/j.ijplas.2017.09.012 ↗
47. Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation10.1016/j.actamat.2004.09.040 ↗
48. Activated slip systems in bimodal Ti–6Al–4V plastically deformed at low and moderately high temperatures10.1016/j.msea.2020.140211 ↗
49. High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy10.1016/j.msea.2016.10.095 ↗
50. Effect of different c/a ratio on the microstructure and mechanical properties in magnesium alloys processed by ECAP10.1016/j.actamat.2015.12.050 ↗