journal article·2025-01

Unveiling the particle-feature influence of lithium nickel manganese cobalt oxide on the high-rate performances of practical lithium-ion batteries

Hong-Yu Wang, Shi-Lin Mei, Xiao-Lan Tan, Bao-Hua Lu, Nan Li, Zhen-Bo Wang

Publisher page

Abstract

The commercialized lithium nickel manganese cobalt oxides have been extensively applied for high-rate lithium-ion batteries due to its collective merits of fast kinetics, high specific capacity, and reasonable cost. The optimization on lithium nickel manganese cobalt oxide particles is crucial for high-rate batteries since the rate capability, storage and cycling stability are highly dependent on the chemical and physical properties of the cathode materials. Herein, the particle-feature influence on the high-rate performances is investigated to unveil the structure-property relationship. Through systematic electrochemical analysis and material characterizations, a direct comparison among commercial lithium nickel manganese cobalt oxide cathode materials with different particle size, doping, and crystalline structures has been performed. It is found that for polycrystalline lithium nickel manganese cobalt oxide materials, appropriate Al and Zr doping and small particle size are beneficial to superior rate performance and cycling stability up to 30 C. While single-crystalline particles show outstanding storage properties compared to polycrystalline particles with similar size and ion doping. Morphological and structural evolution of the lithium nickel manganese cobalt oxide particles after cycling has been revealed including the changed mixing degree of Li +/Ni 2+, collapsing of primary particles and different parasitic reactions between the electrolyte and the particle surface. This work can provide direct guidance for the subtle design of efficient cathodes for high-rate lithium-ion batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Binder free mesoporous Ag-doped Co3O4 nanosheets with outstanding cyclic stability and rate capability for advanced supercapacitor applications
2. Advances in electrochemical energy storage systems10.3390/electrochem3020014 ↗
3. Lead-free relaxor ferroelectric ceramics with ultrahigh energy storage densities via polymorphic polar nanoregions design10.1002/smll.202206958 ↗
4. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
5. Indicative energy technology assessment of advanced rechargeable batteries10.1016/j.apenergy.2014.10.037 ↗
6. Opportunities and challenges of layered lithium-rich manganese-based cathode materials for high energy density lithium-ion batteries10.1021/acs.energyfuels.3c02447 ↗
7. “Fast-charging” anode materials for lithium-ion batteries from perspective of ion diffusion in crystal structure10.1021/acsnano.3c08712 ↗
8. Emerging multiscale porous anodes toward fast charging lithium-ion batteries10.1021/acsnano.3c07424 ↗
9. Dual modification of olivine LiFe0.5Mn0.5PO4 cathodes with accelerated kinetics for high-rate lithium-ion batteries10.1021/acs.iecr.2c04303 ↗
10. Elevated energy density and cyclic stability of LiVPO4F cathode material for high-rate lithium ion batteries10.1021/acsaem.0c00081 ↗
11. A comprehensive review on metal-oxide nanocomposites for high-performance lithium-ion battery anodes10.1021/acs.energyfuels.1c00315 ↗
12. An unavoidable challenge for ni-rich positive electrode materials for lithium-ion batteries10.1021/acs.chemmater.9b02372 ↗
13. Realization of a high-voltage and high-rate nickel-rich NCM cathode material for libs by Co and Ti dual modification10.1021/acsami.1c03195 ↗
14. Ultrathin Al2O3 coating on LiNi0.8Co0.1Mn0.1O2 cathode material for enhanced cycleability at extended voltage ranges
15. Enhanced electrochemical properties of lithium-reactive V₂O₅ coated on the LiNi₀.₈Co₀.₁Mn₀.₁O₂ cathode material for lithium ion batteries at 60 °C10.1039/C2TA00678B ↗
16. Annealing effects of TiO₂ coating on cycling performance of Ni-rich cathode material LiNi₀.₈Co₀.₁Mn₀.₁O₂ for lithium-ion battery.10.1016/j.matlet.2020.127418 ↗
17. Design and synthesis of double-functional polymer composite layer coating to enhance the electrochemical performance of the Ni-rich cathode at the upper cutoff voltage10.1021/acsami.8b21621 ↗
18. Polyvinylpyrrolidone-induced uniform surface-conductive polymer coating endows Ni-rich LiNi₀.₈Co₀.₁Mn₀.₁O₂ with enhanced cyclability for lithium-ion batteries.10.1021/acsami.9b04050 ↗
19. Fluorinated polyimide as a novel high-voltage binder for high-capacity cathode of lithium-ion batteries
20. Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes10.1038/s41560-019-0387-1 ↗
21. Mg–Al–B co-substitution LiNi₀.₅Co₀.₂Mn₀.₃O₂ cathode materials with improved cycling performance for lithium-ion battery under high cutoff voltage.10.1016/j.electacta.2016.01.039 ↗
22. Enhanced cyclability and high-rate capability of LiNi₀.₈₈Co₀.₀₉₅Mn₀.₀₂₅O₂ cathodes by homogeneous Al³⁺ doping.10.1021/acsami.9b10558 ↗
23. Simultaneously dual modification of Ni-rich layered oxide cathode for high-energy lithium-ion batteries10.1002/adfm.201808825 ↗
24. Stabilizing the structure of nickel-rich lithiated oxides via Cr doping as cathode with boosted high-voltage/temperature cycling performance for Li-ion battery10.1002/ente.201900498 ↗
25. Boosting the cycling and storage performance of lithium nickel manganese cobalt oxide-based high-rate batteries through cathode manipulation10.1016/j.electacta.2023.143566 ↗
26. Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries10.1016/j.nanoen.2020.104450 ↗
27. Microstructural observations of “single crystal” positive electrode materials before and after long term cycling by cross-section scanning electron microscopy
28. Comparative study of polycrystalline and single-crystal NCM811 cathode materials: the role of crystal defects in electrochemical performance10.1039/D3TA03290F ↗
29. In-depth comparison of polycrystalline and single-crystal nickel-rich ncm cathodes in pouch-type full cells10.1149/MA2021-023388mtgabs ↗
30. Polycrystalline and single crystalline NCM cathode materials-quantifying particle cracking
31. A comparative investigation of single crystal and polycrystalline Ni-rich NCMs as cathodes for lithium-ion batteries10.1002/eem2.12331 ↗
32. Chemical modification of nickel-rich layered cathode materials to improve battery life10.1016/j.jelechem.2024.118168 ↗
33. Enhancing the electrochemical performance and structural stability of Ni-rich layered cathode materials via dual-site doping10.1021/acsami.1c00755 ↗
34. Revealing the multiple influences of Zr substitution on the structural and electrochemical behavior of high nickel LiNi0.8Co0.1Mn0.1O2 cathode material10.1021/acs.jpcc.1c01727 ↗
35. The effect of ion doping on nickel-rich NCM cathode materials of lithium ion batteries10.1021/acs.jpcc.1c09691 ↗
36. B/Al codoped/coated ultra-high nickel cobalt-free material with excellent high voltage/rate cycle stability10.1021/acssuschemeng.4c01847 ↗
37. Development of Mn doped ZnAl₂O₄ via hydrothermal method as photocatalyst for Cr(VI) reduction under visible light.10.1016/j.ceramint.2024.04.149 ↗
38. Temperature induced structural and polarization features in BaFe₁₂O₁₉.10.1039/D3TC01533E ↗
39. Fine-tuning of redox-ability, optical, and electrical properties of Bi₂MoO₆ ceramics via lanthanide doping and rGO integration for photo-degradation of Methylene Blue and Ciprofloxacin.10.1016/j.jallcom.2024.175466 ↗
40. Enhancing high-temperature and high-voltage performances of single-crystal LiNi0.5Co0.2Mn0.3O2 cathodes through a LiBO2/LiAlO2 dual-modification strategy10.1021/acssuschemeng.9b07792 ↗
41. Site-dependent multicomponent doping strategy for Ni-rich LiNi1−2yCoyMnyO2 (y = 1/12) cathode materials for Li-ion batteries10.1039/C7TA08618K ↗
42. Nano-Y2O3-coated LiNi0.5Co0.2Mn0.3O2 cathodes with enhanced electrochemical stability under high cut-off voltage and high temperature10.1016/j.ceramint.2017.06.028 ↗
43. Mg-Al-B co-substitution LiNi0.5Co0.2Mn0.3O2 cathode materials with improved cycling performance for lithium-ion battery under high cutoff voltage10.1016/j.electacta.2016.01.039 ↗
44. Improved high voltage electrochemical performance of Li2ZrO3-coated LiNi0.5Co0.2Mn0.3O2 cathode material10.1016/j.jallcom.2015.06.071 ↗
45. Improving the electrochemical performance of LiNi0.5Co0.2Mn0.3O2 by double-layer coating with Li2TiO3 for lithium-ion batteries10.1007/s11581-016-1792-0 ↗
46. Co-modification by LiAlO2-coating and Al-doping for LiNi0.5Co0.2Mn0.3O2 as a high-performance cathode material for lithium-ion batteries with a high cutoff voltage10.1016/j.jallcom.2018.07.223 ↗
47. Study on the effect of Ti substitution on the structural and electrochemical characteristics of O3-NaNi1/3Mn(1/3-x)Fe1/3TixO2 cathode materials10.1016/j.jssc.2024.124734 ↗
48. Effect of Ti ion doping on electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material10.1016/j.electacta.2019.135086 ↗
49. Al & Ti Synergy enhancing ionic diffusion and stabilizing lattice oxygen for the high voltage single crystal Ni-rich layered oxide cathode materials10.1016/j.jpowsour.2024.234439 ↗
50. Enabling high rate performance of Ni-rich layered oxide cathode by uniform titanium doping10.1016/j.mtener.2019.05.003 ↗
51. High voltage electrochemical performance of single crystal LiNi0.8Co0.1Mn0.1O2 cathode materials with Al-Mg dual doping10.1016/j.jallcom.2024.174608 ↗
52. Improving the electrochemical performance of ternary material LiNi0.5Co0.2Mn0.3O2 by Mg2+ doping10.1016/j.ijoes.2023.100283 ↗
53. Effect of Mg doping on the structural and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials10.1016/j.electacta.2015.09.151 ↗
54. Effect of Mg-doping on the electrochemical performance of LiNi0.84Co0.11Mn0.05O2 cathode for lithium ion batteries10.1016/j.ijhydene.2020.04.292 ↗
55. Sufficient utilization of zirconium ions to improve the structure and surface properties of nickel-rich cathode materials for lithium-ion batteries10.1002/cssc.201702451 ↗
56. Restraining the polarization increase of Ni-rich and low-Co cathodes upon cycling by Al-doping10.1039/D0TA00260G ↗
57. Al-doped Li[Ni0.78Co0.1Mn0.1Al0.02]O2 for high performance of lithium ion batteries10.1016/j.ceramint.2018.12.196 ↗
58. Construction of homogeneously Al3+ doped Ni rich Ni-Co-Mn cathode with high stable cycling performance and storage stability via scalable continuous precipitation10.1016/j.electacta.2018.08.124 ↗
59. Magnetic properties of anion-deficient La₁₋ₓBaₓMnO₃₋ₓ/₂ (0 ≤ x ≤ 0.30) manganites10.1134/1.1545390 ↗
60. Kinetic limitations in single-crystal high-nickel cathodes10.1002/anie.202012773 ↗
61. Phase separation and size effects in Pr₀.₇₀Ba₀.₃₀MnO₃₊δ perovskite manganites