Heavy rare earth-free high resistivity and coercivity Nd-Fe-B hot-deformed magnet developed by Pr-Cu diffusion and CaF2-LiF eutectic addition
Source abstract
Abstract
To meet the demand for Nd-Fe-B permanent magnets with reduced eddy current losses in electric traction motors, increasing the electrical resistivity of the magnets is critical. The high resistivity must be achieved while maintaining high coercivity, which often requires the use of expensive heavy rare earth (HRE) fluorides such as DyF 3. Although an increase in coercivity without the use of HRE can be achieved by the eutectic grain boundary diffusion process (GBDP), this results in a reduction in the resistivity of the magnet. In this study, we demonstrate the simultaneous improvement in coercivity and resistivity of hot-deformed Nd-Fe-B magnets to 1.86 T and 344 μΩ cm, respectively, without relying on HRE. This improvement involves the diffusion of Pr-Cu onto ribbon powder, followed by the addition of a CaF 2-LiF eutectic mixture prior to the hot pressing and deforming process. This high resistivity results in a reduction in the temperature rise of the magnet under a high frequency AC magnetic field from ∼150 °C to ∼130 °C, while the developed Dy-free magnet can have a sufficiently large coercivity of 0.74 T at 130 °C. The microstructural origin of the high resistivity is the effective isolation of Nd-Fe-B ribbon flakes by a resistive fluoride layer. Furthermore, the optimization of the intergranular phase (IGP) and the formation of (Nd,Pr) 2Fe 14B shells contribute to the increase in coercivity. Importantly, no degradation in the mechanical strength of the magnet is observed. This research provides a viable approach to achieve high coercivity and high resistivity in hot-deformed Nd-Fe-B magnets without reliance on HRE elements.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic properties of thin films · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Strategy for high-coercivity Nd–Fe–B magnets10.1016/j.scriptamat.2012.06.038 ↗
2. Prospect for HRE-free high coercivity Nd-Fe-B permanent magnets10.1016/j.scriptamat.2018.03.012 ↗
3. Magnetization and magnetic anisotropy of R2Fe14B measured on single crystals10.1063/1.336611 ↗
4. Perspective and prospects for rare earth permanent magnets10.1016/j.eng.2018.11.034 ↗
5. Rare earth permanent magnets and their place in the future economy10.1016/j.eng.2019.12.007 ↗
6. Eddy-current loss analysis in PM of surface-mounted-PM SM for electric vehicles10.1109/20.877827 ↗
7. Microstructure, magnetic and electrical properties of the composite magnets of Nd–Fe–B powders coated with silica layer10.1016/j.jallcom.2013.01.107 ↗
8. Effect of CaF2 addition on the microstructure and magnetic and electrical properties of sintered Nd-Fe-B magnets
9. Enhanced electric resistivity of die-upset magnets by segmented NdF3 addition
10. Microstructure, magnetic properties, and electrical resistivity of Nd-Fe-B/NdF3; composite magnets10.1109/TMAG.2014.2323965 ↗
11. Nd2Fe14B/CaF2; composite magnet synthesized by liquid-phase coating10.1109/TMAG.2015.2443182 ↗
12. High electrical resistivity Nd-Fe-B die-upset magnet doped with eutectic DyF3–LiF salt mixture10.1063/1.4978580 ↗
13. High-resistivity anisotropic hot-deformed Nd-Fe-B magnets prepared from DyF3 electrophoretic deposited powders10.1016/j.jallcom.2023.168855 ↗
14. Electrical and magnetic properties of hot-deformed Nd-Fe-B magnets with different DyF 3 additions10.1063/1.4822026 ↗
15. High-coercivity ultrafine-grained anisotropic Nd–Fe–B magnets processed by hot deformation and the Nd–Cu grain boundary diffusion process10.1016/j.actamat.2013.07.049 ↗
16. Low temperature diffusion process using rare earth-Cu eutectic alloys for hot-deformed Nd-Fe-B bulk magnets10.1063/1.4869062 ↗
17. Microstructure and temperature dependent of coercivity of hot-deformed Nd–Fe–B magnets diffusion processed with Pr–Cu alloy10.1016/j.actamat.2015.08.013 ↗
18. Magnetic properties improvement of hot-deformed Nd–Fe–B permanent magnets by Pr–Cu eutectic pre-diffusion process10.1016/j.actamat.2019.05.065 ↗
19. Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process10.1016/j.jallcom.2015.12.227 ↗
20. Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process using Nd 62 Dy 20 Al 18 alloy10.1016/j.scriptamat.2016.10.020 ↗
21. Grain boundary and interface chemistry of an Nd–Fe–B-based sintered magnet10.1016/j.actamat.2011.10.043 ↗
22. Investigation of AC loss of permanent magnet of SPM motor considering hysteresis and eddy-current losses10.1109/TMAG.2005.846282 ↗
23. Modeling and analysis of electromagnetic force, vibration, and noise in permanent-magnet synchronous motor considering current harmonics10.1109/TIE.2016.2593683 ↗
24. Review and trends in electric traction motors for battery electric and hybrid vehicles
25. Quasi-discrete modelling of PMSM phase currents in drives with low switching-to-fundamental frequency ratio10.1049/iet-pel.2018.6285 ↗
26. Effect of Nd content on the microstructure and coercivity of hot-deformed Nd–Fe–B permanent magnets10.1016/j.actamat.2013.05.027 ↗
27. Correlation between microstructural heterogeneity and energy product in hot deformed Nd-Fe-B magnets10.1016/j.jmmm.2020.166847 ↗
28. Mechanical properties study of hot-pressed and hot-deformed Nd-Fe-B magnets
29. Reduction of the mechanical anisotropy for hot-deformed Nd-Fe-B magnets by changing the morphology of the melt-spun powders10.1016/j.jmmm.2019.02.080 ↗
30. Reduction of the mechanical anisotropy in hot-deformed Nd-Fe-B magnets by the construction of heterogeneous structure10.1016/j.jallcom.2023.169002 ↗
31. Fluoride-added Pr–Fe–B die-upset magnets with increased electrical resistivity10.1063/1.3058641 ↗
32. The Systems CaF[sub 2]-LiF and CaF[sub 2]-LiF-MgF[sub 2]10.1149/1.2428441 ↗
33. Fluoride toxicity to aquatic organisms: a review10.1016/S0045-6535(02)00498-8 ↗
34. Sources and toxicity of fluoride in the environment10.1007/s11164-012-0841-1 ↗