Mid-entropy ceramic (Y0.3Gd0.3Yb0.4)7(Hf0.5Ta0.5)6O24: A potential novel thermal barrier ceramic prepared by ultrafast high-temperature sintering
Source abstract
Abstract
To meet the demanding service requirements of aero-engines, a mid-entropy thermal barrier ceramic (Y 0.3Gd 0.3Yb 0.4) 7(Hf 0.5Ta 0.5) 6O 24 (YGYbHT) was designed and successfully prepared by the ultrafast high-temperature sintering, and its performances were systematically characterized and analyzed. After high-temperature annealing at 1500 °C, it exhibited excellent high-temperature phase stability and an extremely sluggish grain growth rate (13 nm/h). Furthermore, the coefficient of thermal expansion(14.85 × 10 −6/K) approximated that of nickel-based superalloy, and the thermal conductivity of 2.27 W m −1 K −1 was obtained. Finally, YGYbHT possessed an elastic modulus (155.9 GPa) inferior to traditional YSZ and high hardness (11.83 GPa). The excellent performances are mainly attributed to the entropy-stabilized effect, lattice distortions resulting from the size disorder, and sluggish diffusion effect within the entropy-stabilized material. In conclusion, YGYbHT has the potential to be further developed to replace traditional YSZ as a next-generation thermal barrier coating material.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
2. Development review of military aero engine in 2020
3. TBC experience in land-based gas turbines10.1007/s11666-997-0009-5 ↗
4. Methods to reduce the thermal conductivity of EB-PVD TBCs10.1016/S0257-8972(01)01651-6 ↗
5. Mechanical and thermal properties of RE4Hf3O12 (RE=Ho, Er, Tm) ceramics with defect fluorite structure10.1016/j.jmst.2019.04.025 ↗
6. Mechanical and thermal properties of RETaO4(RE = Yb, Lu, Sc) ceramics with monoclinic-prime phase10.1016/j.jmst.2020.02.051 ↗
7. A potential ZrO2 doped scandium tantalite ceramics for thermal/ environmental barrier coating material10.1016/j.matchemphys.2021.124786 ↗
8. Solution precursor thermal spraying of gadolinium zirconate for thermal barrier coating10.1016/j.jeurceramsoc.2021.11.050 ↗
9. Ferroelastic tetragonal-monoclinic phase transition and anisotropic thermal expansion of LuNbO4 ceramics10.1016/j.scriptamat.2022.115258 ↗
10. Single-phase rare-earth high-entropy zirconates with superior thermal and mechanical properties10.1016/j.jeurceramsoc.2021.12.080 ↗
11. Structure, thermal and mechanical properties of mid-entropy thermal barrier ceramic (Y0.3Gd0.3Yb0.4)4Hf3O12 prepared by ultrafast high-temperature sintering10.1016/j.ceramint.2023.10.083 ↗
12. The mechanical and thermal properties, CMAS corrosion resistance, and the wettability of novel thermal barrier material GdTaO410.1016/j.ceramint.2021.07.028 ↗
13. Ultra-low thermal conductivity and enhanced mechanical properties of high-entropy rare earth niobates (RE3NbO7, RE = Dy, Y, Ho, Er, Yb)10.1016/j.jeurceramsoc.2020.08.070 ↗
14. Effect of multi-component at the A site on the thermophysical properties of high entropy niobates10.1016/j.jeurceramsoc.2023.12.038 ↗
15. CMAS corrosion behavior of a novel high entropy (Nd0.2Gd0.2Y0.2Er0.2Yb0.2)2Zr2O7 thermal barrier coating materials10.1016/j.corsci.2023.111529 ↗
16. Novel (Sm0.2Lu0.2Yb0.2Y0.2Dy0.2)3TaO7 high-entropy ceramic for thermal barrier coatings10.1016/j.ceramint.2022.11.061 ↗
17. Glass-like thermal conductivity in mass-disordered high-entropy (Y,Yb)2(Ti,Zr,Hf)2O7 for thermal barrier material10.1016/j.matdes.2021.110059 ↗
18. High-entropy (La0.2Nd0.2Sm0.2Gd0.2Yb0.2)2(Zr0.75Ce0.25)2O7 thermal barrier coating material with significantly enhanced fracture toughness10.1016/j.cja.2022.12.001 ↗
19. Phase stability and CMAS corrosion resistance of RETaO4 (RE=Gd and Yb) at 1250 °C10.1016/j.ceramint.2022.04.219 ↗
20. Ultrafast high-temperature sintering of (Y0.2Dy0.2Er0.2Tm0.2Yb0.2)4Hf3O12 high-entropy ceramics with defective fluorite structure10.1016/j.jeurceramsoc.2022.04.023 ↗
21. Ultrafast high-temperature sintering of high-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Hf2O7 ceramics with fluorite structure10.1016/j.ceramint.2022.09.041 ↗
22. The CMAS corrosion behavior of high-entropy (Y0.2Dy0.2Er0.2Tm0.2Yb0.2)4Hf3O12 hafnate material prepared by ultrafast high-temperature sintering (UHS)10.1016/j.jeurceramsoc.2022.12.011 ↗
23. A general method to synthesize and sinter bulk ceramics in seconds10.1126/science.aaz7681 ↗
24. Ultrafast high-temperature synthesis and densification of high-entropy carbides10.1016/j.jeurceramsoc.2022.03.054 ↗
25. Ultrafast high-temperature heating in air10.1016/j.jeurceramsoc.2022.03.015 ↗
26. Cr3C2 assisted ultrafast high-temperature sintering of TiC10.1016/j.jeurceramsoc.2023.05.031 ↗
27. Ultrafast high-temperature sintering (UHS) of fine grained α-Al2O310.1016/j.jeurceramsoc.2021.05.056 ↗
28. Ultrafast high-temperature sintering of silicon nitride: a comparison with the state-of-the-art techniques10.1016/j.jeurceramsoc.2021.06.021 ↗
29. Ultrafast high-temperature sintering (UHS) of Li1.3Al0.3Ti1.7(PO4)310.1016/j.ceramint.2021.04.216 ↗
30. Li7La3Zr2O12 solid electrolyte sintered by the ultrafast high-temperature method10.1016/j.jeurceramsoc.2021.05.041 ↗
31. From pit fire to Ultrafast High-temperature Sintering (UHS): a review on ultrarapid consolidation10.1016/j.ceramint.2022.11.091 ↗
32. Preparation and high temperature-XRD studies on a pyrochlore series with the general composition Gd2−xNdxZr2O7
33. Single-phase duodenary high-entropy fluorite/pyrochlore oxides with an order-disorder transition10.1016/j.actamat.2021.116858 ↗
34. Toughening of Nontransformable t’-YSZ by Addition of Titania10.1111/j.1551-2916.2007.01990.x ↗
35. A comprehensive mechanism for the sintering of plasma-sprayed nanostructured thermal barrier coating10.1016/j.ceramint.2017.04.083 ↗
36. Marked reduction in the thermal conductivity of (La0.2Gd0.2Y0.2Yb0.2Er0.2)2Zr2O7 high-entropy ceramics by substituting Zr4+ with Ti4+10.1016/j.ceramint.2021.12.158 ↗
37. High entropy (Y0.2Yb0.2Lu0.2Eu0.2Er0.2)3Al5O12: a novel high temperature stable thermal barrier material10.1016/j.jmst.2020.01.056 ↗
38. Highly anti-sintering and toughened pyrochlore (Dy0.2Nd0.2Sm0.2Eu0.2Yb0.2)2Zr2O7 high-entropy ceramic for advanced thermal barrier coatings10.1016/j.ceramint.2023.04.173 ↗
39. Rare-earth-tantalate high-entropy ceramics with sluggish grain growth and low thermal conductivity10.1016/j.ceramint.2021.12.332 ↗
40. Thermal barrier coating materials10.1016/S1369-7021(05)70934-2 ↗
41. High-entropy ferroelastic (10RE0.1)TaO4 ceramics with oxygen vacancies and improved thermophysical properties10.1016/j.jmst.2022.12.027 ↗
42. Formation and properties of reaction layers of cobaltite electrodes on bismuth oxide electrolytes10.1016/S0167-2738(97)00149-5 ↗
43. Research on the electrochemistry of oxygen ion conductors in the former Soviet Union10.1007/s100080000141 ↗
44. Dual-phase rare-earth-zirconate high-entropy ceramics with glass-like thermal conductivity10.1016/j.jeurceramsoc.2020.11.047 ↗
45. Structural, thermophysical, mechanical and electrical properties of equimolar five-principal element flurite-structured high-entropy oxides10.1016/j.jallcom.2023.172971 ↗
46. Thermophysical performances of high-entropy (La0.2Nd0.2Yb0.2Y0.2Sm0.2)2Ce2O7 and (La0.2Nd0.2Yb0.2Y0.2Lu0.2)2Ce2O7 oxides10.1016/j.ceramint.2021.11.101 ↗
47. New generation perovskite thermal barrier coating materials10.1007/s11666-008-9239-4 ↗
48. Enhanced mechanical and thermal properties of ferroelastic high-entropy rare-earth-niobates10.1016/j.scriptamat.2021.113912 ↗
49. (La0.2Dy0.2Nd0.2Sm0.2Eu0.2)2GdTaO7: a promising candidate oxides for high-temperature coating applications10.1016/j.jmrt.2023.06.256 ↗
50. Designing high-entropy rare-earth zirconates with tunable thermophysical properties for thermal barrier coatings10.1016/j.jallcom.2022.166714 ↗
51. High-entropy fluorite oxides: atomic stabiliser effects on thermal-mechanical properties10.1016/j.jeurceramsoc.2022.07.026 ↗
52. Thermophysical performances of (La1/6Nd1/6Yb1/6Y1/6Sm1/6Lu1/6)2Ce2O7 high-entropy ceramics for thermal barrier coating applications10.1016/j.ceramint.2021.09.172 ↗