journal article·2025-01

Microstructure and mechanical properties of the as-cast and annealed CoNiV-based MEAs with Al addition

Peng Wang, Jun Cheng, Bubu Luan, Jin Li, Haitao Wang, Yixuan He, Meifeng He

Publisher page

Abstract

Lattice distortion, which is intended to increase the yield strengths of alloys, is central to alloy design. This study focuses on investigating the close connection between microstructure and mechanical properties of (CoNiV) 97Al 3 medium-entropy alloys (MEAs) in the as-cast and annealed states. The grain size and phase composition of the alloys were optimized by combining the large deformation cold-rolling and high temperature annealing treatment, and the toughening mechanism of the alloys was evolved. After annealing at 900 and 950°C, a small amount of diffuse B2 phase appears within the alloy, which is able to strengthen the alloy to obtain high yield strength. Since intermetallic compounds such as Ni3Al are extremely unstable, they will decompose during annealing at higher temperature (1000°C), the alloy transforms into a single FCC phase. Therefore, the as-cast and annealed (CoNiV) 97Al 3 alloy exhibited excellent mechanical properties, including yield strengths of 0.8–1.1 GPa, ultimate tensile strengths of 1.05–1.7 GPa, and an optimal elongation of 36.7 %. Combined with the mechanical properties and microstructure of the as-cast and annealed (CoNiV) 97Al 3 MEAs, the alloy strengthening was mainly attributed to the synergistic effect of dislocations, solid solution phases, and B2 brittle precipitated phases, while the good ductility was mainly due to the annealing twins. Thus, harmonizing multiple strength/toughness mechanisms can lead to a more optimal alloy strength–plasticity equilibrium point.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
2. Achieving strength-ductility synergy of spark plasma sintered (CoCrNi)94Al3Ti3 medium-entropy alloy via post-sintering in-situ precipitation treatment
3. Achieving exceptional strength-ductility combination in a novel L12 nanoparticles-strengthened high-entropy alloy via conventional casting10.1016/j.intermet.2023.108160 ↗
4. Achieving a strength-ductility combination in VCoNi medium-entropy alloy via N alloying10.1016/j.jallcom.2023.171267 ↗
5. A new route to achieve high strength and high ductility compositions in Cr-Co-Ni-based medium-entropy alloys: a predictive model connecting theoretical calculations and experimental measurements10.1016/j.jallcom.2023.170555 ↗
6. Hydrogen induced microstructure, mechanical properties and cracking evolution in a novel CoCrNiMo medium-entropy alloy10.1016/j.jallcom.2023.168790 ↗
7. Excellent combination of cryogenic strength and ductility of a metastable Fe65Ni15Co8Mn8Ti3Si medium entropy alloy through the exceptional deformation-induced martensitic transformation10.1007/s10853-022-07400-8 ↗
8. Deformation and failure of the CrCoNi medium-entropy alloy subjected to extreme shock loading10.1126/sciadv.adf8602 ↗
9. On the strength and fracture toughness of an additive manufactured CrCoNi medium-entropy alloy10.1016/j.actamat.2023.119249 ↗
10. Segregation of solute elements and strengthening effects of CoCrNiCux medium-entropy alloys: a combined experimental and simulation study10.1016/j.jallcom.2023.169015 ↗
11. Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength10.1073/pnas.1807817115 ↗
12. A prediction model for the failure threshold in a CoNiV medium-entropy alloy10.1063/5.0158721 ↗
13. Electrochemical hydrogen evolution reaction evaluation of CoNi(Cr/V) medium-entropy alloys in an acidic environment10.1021/acsaem.3c01827 ↗
14. Abnormal strain-hardening in Co-rich CoNiV medium-entropy alloys10.1016/j.scriptamat.2023.115894 ↗
15. Near-theoretical strength and deformation stabilization achieved via grain boundary segregation and nano-clustering of solutes10.1038/s41467-024-53349-4 ↗
16. Nickel content-dependent microstructure and mechanical properties of TiZrNbHfNi high entropy alloy thin films
17. Electron beam weldability of TiZrNbTa refractory high-entropy alloy and TC4 titanium alloy
18. Novel strength-electrical conductivity synergy in Cu-based composites reinforced with TiZrNbTa high entropy alloy10.1016/j.msea.2023.145210 ↗
19. Optimizing the cell compatibility and mechanical properties in TiZrNbTa medium-entropy alloy/β-Ti composites through phase transformation10.1016/j.actbio.2024.05.004 ↗
20. Tuning microstructures and tensile properties of the CoNiV medium entropy alloy by minor alloying10.1016/j.jallcom.2024.175794 ↗
21. Ultrastrong medium-entropy single-phase alloys designed via severe lattice distortion
22. A strong and ductile medium-entropy alloy resists hydrogen embrittlement and corrosion10.1038/s41467-020-17295-1 ↗
23. A quasi-in-situ EBSD study of the thermal stability and grain growth mechanisms of CoCrNi medium entropy alloy with gradient-nanograined structure10.1016/j.jmst.2021.07.054 ↗
24. Achieving ultra-high strength in a precipitation-hardened CoCrNi-based medium-entropy alloy with partially recrystallized microstructure and heterogeneous grains10.1016/j.vacuum.2021.110169 ↗
25. Achieving ultrahigh strength in CoCrNi-based medium-entropy alloys with synergistic strengthening effect10.1016/j.msea.2020.139028 ↗
26. Quantification of the influence of anisotropic plastic yielding on cold rolling force10.1016/j.jmatprotec.2023.118055 ↗
27. Heterogeneous banded precipitation of (CoCrNi)93Mo7 medium entropy alloys towards strength-ductility synergy utilizing compositional inhomogeneity10.1016/j.scriptamat.2019.07.026 ↗
28. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy10.1038/s41467-020-16085-z ↗
29. Microstructure and mechanical properties of CoCrNi-Mo medium entropy alloys: experiments and first-principle calculations10.1016/j.jmst.2020.04.062 ↗
30. Effects of Al alloying on microstructure and mechanical properties of VCoNi medium entropy alloy10.1016/j.msea.2021.141054 ↗
31. A dual-phase alloy with ultrahigh strength-ductility synergy over a wide temperature range10.1126/sciadv.abi4404 ↗
32. Heat treatment effects on microstructure and mechanical properties of TiZrNbTa high-entropy alloy10.1016/j.jallcom.2022.167408 ↗
33. On the substructure evolution and its distinct role on dynamic strain aging in a multi-component cobalt base alloy at intermediate temperatures (300 to 700 °C)10.1016/j.scriptamat.2023.115583 ↗
34. Phases, microstructures and properties of multi-component FeCoNi-based alloys10.1080/02670836.2020.1726017 ↗
35. Electron beam melting of (FeCoNi)86Al7Ti7 high-entropy alloy10.1016/j.jallcom.2023.170752 ↗
36. High-rate superplasticity in an equiatomic medium-entropy VCoNi alloy enabled through dynamic recrystallization of a duplex microstructure of ordered phases10.1016/j.actamat.2020.03.048 ↗
37. Plastic deformation and strengthening mechanism in CoNiV medium-entropy alloy fiber10.1016/j.ijplas.2024.103929 ↗
38. Investigation on the activation mechanism of hydrogen absorption in TiZrNbTa high entropy alloy10.1016/j.jallcom.2018.12.120 ↗
39. Solid-solution strengthening by Al and Cr in FeCrAl oxide-dispersion-strengthened alloys10.1016/j.msea.2021.141076 ↗
40. Effect of aluminum addition on solid solution strengthening in CoCrNi medium-entropy alloy10.1016/j.jallcom.2018.12.065 ↗
41. High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure10.1016/j.scriptamat.2020.04.035 ↗
42. Mechanical properties and nanoparticles precipitation behavior of multi-component ultra high strength steel10.1016/j.matdes.2020.108637 ↗
43. Effect of cold deformation on the electrochemical behaviour of 304L stainless steel in contaminated sulfuric acid environment10.1016/j.apsusc.2017.07.057 ↗
44. Characterization of as-cast microstructural heterogeneities and damage mechanisms in eutectic AlCoCrFeNi2.1 high entropy alloy10.1016/j.matchar.2019.109955 ↗
45. Lomer-Cottrell locks with multiple stair-rod dislocations in a nanostructured Al alloy processed by severe plastic deformation10.1016/j.msea.2019.01.066 ↗