Enhanced temperature range and stability in LaAlO3 NTC ceramics through Ce-Nb codoping
Source abstract
Abstract
Negative temperature coefficient (NTC) thermistors have garnered increased attention due to their high sensitivity, low thermal inertia, and cost-effectiveness. However, their practical application is significantly constrained by a limited temperature range and poor stability. In this study, a series of Ce-Nb codoped LaAlO 3 ceramics were synthesized using the traditional solid-state reaction method, and their unique electrical properties as NTC thermistors were examined. XRD analysis reveals that Ce-Nb codoping induces lattice distortion in the LaAlO 3 ceramics. HAADF-STEM shows that Ce replaces La at A-sites, while Nb substitutes for Al at B-sites. XPS indicates that the substitution of Ce 4+ for La 3+ and Nb 5+ for Al 3+ facilitates the formation of oxygen vacancies and enhances the number of free carriers. Electrical resistance and UV measurements demonstrate that increasing the Ce and Nb doping levels improves carrier mobility and reduces the band gap of LaAlO 3. These modifications significantly enhance the electrical performance and extend the temperature range to 298 K –1773 K when the Ce doping level is 0.2 and the Nb doping level is 0.1. Additionally, aging tests indicate that Ce-Nb co-doping reduces the aging drift of LaAlO 3 to 0.38 % after 500 h of aging at 1273 K. This novel Ce-Nb codoped LaAlO 3 ceramic, with its broad temperature range and superior stability, shows significant potential for application in NTC thermistors.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical and Thermal Properties of Materials · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Negative temperature coefficient resistance (NTCR) ceramic thermistors: an industrial perspective10.1111/j.1551-2916.2009.02990.x ↗
2. Advanced carbon for flexible and wearable electronics10.1002/adma.201801072 ↗
3. Comparative investigation of Li-mod-ified Ni0.6Zn0.4O thin films and the bulk counterparts in the application of thermistors10.1016/j.surfin.2024.104068 ↗
4. Characterization of nickel manganite NTC thermistor films prepared by aerosol deposition at room temperature10.1016/j.jeurceramsoc.2017.09.005 ↗
5. High-stability solid solution perovskite (1-x) Bi0.2Sr0.5La0.3TiO3- xLaMnO3 (0.05≤ x ≤0.2) for wide-temperature NTC thermistors10.3389/fchem.2023.1275274 ↗
6. A novel linear temperature thermistor in the xAl2O3-(1-x)CdSnO3 system10.1016/j.ceramint.2024.01.170 ↗
7. Fabrication of nano-grained negative temperature coefficient thermistors with high electrical stability10.1007/s12598-019-01294-3 ↗
8. Cation distribution, short-range order and small polaron hopping conduction in nickel manganites, from a neutron diffraction study10.1002/(SICI)1521-3951(199903)212:1<129::AID-PSSB129>3.0.CO;2-T ↗
9. Preparation and characterization of NiMn2O4 negative temperat-ure coefficient ceramics by solid-state coordination reaction10.1007/s10854-014-2118-5 ↗
10. Novel electrical pr-operties of Mn-doped LaCrO3 ceramics as NTC thermistors10.1016/j.jallcom.2021.159269 ↗
11. High temperature NTC ceramic resistors (ambient–1000 °C)10.1016/S0955-2219(03)00376-5 ↗
12. Perovskite forming ceramics of the system SrxLa1-x TiIV x+yCoII yCoIII1-x-2yO3 for NTC thermistor applications10.1016/S0955-2219(00)00149-7 ↗
13. Synthesis and NTC properties of YCr 1−xMnxO3 ceramics sintered under nitrogen atmosphere10.1016/j.jeurceramsoc.2010.12.025 ↗
14. Semiconducting temperature sensors and their applications
15. La1-xCaxMnO3 NTC ceramics for low temperature thermistors with high stability10.1016/j.jpcs.2022.111120 ↗
16. Structural, dielectric, and ele- trical properties of cerium-modified strontium manganite ceramics10.1007/s10854-023-11446-y ↗
17. Electrical conductivity and temperature sent- ivity of Cu/Mo co-modified YFeO3 ceramics10.2298/PAC2102195Z ↗
18. Fabrication of high-sensitivity Bi0.2-xCexSr 0.5La0.3TiO3 (0<x<0.05) ceramics for high-temperature NTC thermistors10.1016/j.jallcom.2020.156749 ↗
19. Novel Cu2+-Fe3+ co-doped LaAlO3 ceramic with high infrared radiation performance10.1016/j.jallcom.2023.172876 ↗
20. Enhanced infrared radiation of LaAlO3 ceramics via Co2+ doping10.1016/j.ceramint.2023.08.314 ↗
21. Optimizing the structure and optical properties of lanthanum aluminate perovskite through Nb5+ doping
22. Color tunable luminescence from LaAlO3: Bi3+, Ho3+ doped phosphors for field emission displays10.1007/s10854-017-8000-5 ↗
23. Effect of Ca2+/Cr3+doping ratio on the infrared radiation performance and Cr6+ formation in LaAlO3 ceramics10.1016/j.jeurceramsoc.2023.11.052 ↗
24. Optical properties of Nd,Th:LaAlO3 demonstrates its potential in high-energy pulsed laser10.1016/j.optlastec.2022.108495 ↗
25. Novel (La0.2Eu0.2Nd0.2Sm0.2Pr0.2)(Al0.6Co0.4)O3-δ and (La0.2Eu0.2Nd0.2Sm0.2Ca0.2)(Al0.6Co0.4)O3-δ high-entropy ceramics with high emissivity and low degradation10.1016/j.ceramint.2024.01.249 ↗
26. Mechanical behaviour of ferroelastic lanthanum metal oxides LaMO3 (M = Co, Al, Ga, Fe)10.1016/j.jeurceramsoc.2016.07.006 ↗
27. LaAlO3: a new high-temperature negative tempera-ture coefficient thermistor10.1007/s10854-022-08169-x ↗
28. Effect of Ce-doping on microstructure and electrical properties of LaAlO3 ceramics10.1016/j.ceramint.2022.10.190 ↗
29. A novel La- Al1-xNbxO3 NTC ceramic with excellent stability for high-temperature thermistor10.1016/j.ceramint.2023.09.235 ↗
30. Synthesis and characterization of mixed conductor CeNbO410.1016/j.jallcom.2014.05.229 ↗
31. A dynamical bragg equation for high-order laue zone reflections10.1002/sca.4950220302 ↗
32. Establishing a relationship between the piezoelectric response and oxygen vacancies in lead-free piezoelectrics10.1021/acsami.3c06520 ↗
33. NMR, and XPS and XPS study of LaAlO3 phase transition with enhanced magnetic and Faraday rotation properties in glass-ceramics10.1016/j.jeurceramsoc.2022.09.052 ↗
34. Design and fabrication of a c-band dielectric res-onator antenna with novel temperature-stable Ce(Nb1–xVx)NbO4 (x = 0–0.4) microwa-ve ceramics10.1021/acsami.2c14627 ↗
35. Calcination temperat-ure-associated discontinuous grain size effect on electrocaloric properties in fine-large-grain BaTiO3-based ferroelectric ceramics10.1016/j.jeurceramsoc.2024.05.031 ↗
36. Microstructure and dielectric properties of Cu and Ho modified BaZrTiO3 ceramics for energy storage applications10.1016/j.est.2024.110691 ↗
37. Phase evolution and relaxor to ferroelectric phase transition boosting ultrahigh electrostrains in (1−x)(Bi1/2Na1/2)TiO3-x(Bi1/2K1/2)TiO3 solid solutions
38. Ce 3d XPS study of composite CexMn1-xO2-y wet oxidation catalysts10.1016/S0169-4332(02)00559-7 ↗
39. Spectral, energy resolution properties and green-yellow LEDs applications of tran-sparent Ce3+:Lu3Al5O12 ceramics10.1016/j.jeurceramsoc.2016.06.015 ↗
40. Valence transition of cerium during the synthesis of powders and densification of CeB6 polycrystalline10.1007/s10854-022-08340-4 ↗
41. Photoelectron spectroscopic study of SrxNbO310.1103/PhysRevB.49.3534 ↗
42. Role of Nb5+-Nd3+ co-dopant in morphotropic boundary of elec- trospun PZT nanoneedles: study on dielectric and piezoelectric sensitivity10.1016/j.jallcom.2023.171531 ↗
43. Anomalous magnetic and spin glass behavior in Nb-substituted LaCo1−xNbxO310.1103/PhysRevB.97.024430 ↗
44. Structural, vibra-tional and electronic properties of Nb substituted orthovanadates LaV1−xNbxO410.1016/j.jallcom.2023.171506 ↗
45. Tuning Oxygen Vacancies in Oxides by Configurational Entropy10.1021/acsami.3c07268 ↗
46. Exploring multifunctional response of Ca10(PO4)6(OH)2–K0.5Na0.5NbO3 ceramic composite for biomedical applications
47. Photocatalytic activities of Mg doped NiO NPs for degradation of M-ethylene blue dye for harmful contaminants: a kinetics, mechanism and recyclability10.1016/j.jpcs.2023.111345 ↗
48. Oxygen vacancies medi-ated changes in ferromagnetic, optical, Photoluminescent and electronic structure proper-ties of Ho-doped CeO2 nanoparticles10.1016/j.ceramint.2023.12.180 ↗
49. Revealing the effect of synthesis conditions on the structural, optical, and antibacterial properties of cerium oxide nanoparticles10.3390/nano11102596 ↗
50. Influence of oxygen vacancies on the structure and magnetic properties of high entropy (Co,Cr,Fe,Mn,Ni)3O410.1016/j.jallcom.2022.166560 ↗
51. Green em-ission from trivalent cerium doped LaAlO3/MgO nano-composite for photonic and latent finger printing applications
52. Variation of optical gaps in perovskite-type 3dtrans-ition-metal oxides10.1103/PhysRevB.48.17006 ↗
53. Tunable bandgap of bismuth-modified barium titanate by cobalt substitution for photovoltaic application10.1007/s10854-022-08359-7 ↗
54. Enhanced solar absorbance and infrared emittance in Co-doped BaTiO310.1016/j.jeurceramsoc.2024.01.052 ↗
55. Functionality and activity of Sol–Gel-prepared Co and Fe co-doped lead-free BTO for thermo-optical applications10.1021/acsomega.2c07660 ↗
56. High-entropy chromate (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)CrO3 for high-temperature NTC thermistors10.1016/j.scriptamat.2024.116087 ↗
57. CaMnxZr(1-x)O3: a novel NTC thermo-sensitive ceramic for applications in a wide temperature range10.1016/j.ceramint.2022.09.166 ↗
58. A2Zr2O7 (A = Nd, Sm, Gd, Yb) zir-conate ceramics with pyrochlore-type structure for high-temperature negative temperatu-re coefficient thermistor10.1007/s10853-020-05104-5 ↗
59. Preparation and characterization for LaMnO3 and 0.3LaMnO3–0.7Y2O3 high temperature bilayer structure NTC thermistors10.1007/s10854-019-01441-7 ↗
60. Novel NTC ceramics based on pyrochlore-type A2Ti2O7 (A = Sm, Eu, Y) titanates for high-temperature thermistors10.1016/j.ceramint.2022.01.181 ↗
61. Novel NTC ceramics based on pyrochlore-type A2Ti2O7 (A = Sm, Eu, Y) titanates for high-temperature thermistors10.1016/j.ceramint.2022.01.181 ↗
62. High-temperature electrical conductivity of LaCr1−xCoxO3 ceramics10.1111/jace.14038 ↗
63. Zr-substituted SnO2-based NTC therm-istors with wide application temperature range and high property stability10.1007/s10854-015-3197-7 ↗
64. New negative temperature coeff-icient thermistor ceramics in Mn-doped CaCu3−xMnxTi4O12 (0≤x≤1) system10.1016/j.ceramint.2014.03.165 ↗
65. MgAl2O4–LaCr0.5Mn0.5O3 composite cer-amics for high temperature NTC thermistors10.1007/s10854-013-1424-7 ↗
66. (1-x)Ni0.9Mn2.1O4-xLaCr0.6Mn0.4O3 composite ceramic with controllable electrical properties for low resistance NTC thermistors10.1016/j.jallcom.2024.175085 ↗
67. Vacancy defects reducing the a- ccuracy and reliability of NTC sensors10.1016/j.ceramint.2023.05.082 ↗
68. Sint-ering and electrical properties of Mn–Co–Fe–Zn–Ni–O high-entropy ceramics for NTC thermistors10.1016/j.ceramint.2023.12.095 ↗
69. Ink-jet printed new core@shell ceramic for high stability NTC thermistors10.1016/j.ceramint.2023.03.216 ↗
70. Investigation of pyrochlore-type A2Sn2O7 (A = La, Nd, Sm, or Gd) ceramics as negative temperature coefficient thermistors for high-temperature application10.1016/j.jpcs.2022.111205 ↗
71. M.A. Smith, J. Goodrich, U. Mohideen, H.U. Rahman, M. Rosenberg, D.A. MendisIntergrain Coupling and Grain Charge in Dusty Plasma Coulomb Crystals 446 AIP Conf. Proc.1998, 21622910.1063/1.56671.
72. Achieving outstanding temperature and frequency stability in NaNbO3-modified (Ba0.94Li0.02La0.04) (Mg0.04Ti0.96)O3 pulse energy storage ceramics10.1039/D3TA01975F ↗
73. Indium doping effect on magnetocaloric, el- ectro-transport and magnetoresistive properties of La0.6Gd0.1Sr0.3Mn1-xInxO310.1016/j.ceramint.2016.03.215 ↗
74. Polaronic effects on the resistivity of manganite thin films10.1103/PhysRevB.58.11519 ↗
75. Coulomb gap and low temperature conductivity of disordered systems10.1088/0022-3719/8/4/003 ↗
76. Electron Localization in Mixed-Valence Manganites10.1103/PhysRevLett.75.3910 ↗
77. Analysis on high-temperature-resistant char-acteristics of LaCrNiMnO ceramics10.1016/S0924-4247(98)00040-5 ↗
78. Investigation of electrical and aging properti- es of Bi-modified (Zn0.4Ni0.6)1-xNaxO3 ceramic thermistors10.1016/j.jeurceramsoc.2021.02.030 ↗