Effects of alloying elements on the corrosion behavior and discharge performance of Al-Zn-Mg-In-Ti-Sn sacrificial anode
Source abstract
Abstract
A range of Al-Zn-Mg-In-Ti-Sn sacrificial anode alloys were designed and prepared, and the effects of In, Sn and Ti elements on the microstructure, self-corrosion and discharge properties of the alloys were investigated by orthogonal experiments. The experimental results indicate that In and Ti are solidly dissolved in the matrix, and Sn exists as Mg 9Sn 5 phases at the grain boundaries. Ti refines the grain size. The order of alloying elements affecting the corrosion rate and current efficiency of Al-Zn-Mg-In-Ti-Sn alloy is In>Sn>Ti. In promotes the activated dissolution of the anode due to dissolution-redeposition mechanism, but excessive addition of In inhibits the shedding of discharge products, leading to deteriorative discharge activation. Addition of Sn in Al anode increases the amount of anodic Mg 9Sn 5 phases and promotes the discharge activation of the substrate due to the galvanic corrosion. Al-5.5Zn-1.0Mg-0.02In-0.04Sn sacrificial anode has a current efficiency of 98.6 % and an actual capacity of 2816.9 Ah/kg, demonstrating an excellent discharge performance. During the discharge process, anodic dissolution mainly occurs along grain boundaries and the second phases, forming corrosion pits and then expanding over time. The accumulation of discharge products and excessive second phases leading to grain detachment significantly decrease the current efficiency of the Al-Zn-Mg-In-Ti-Sn alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Ten-year results of galvanic sacrificial anodes in steel reinforced concrete10.1002/maco.201005707 ↗
2. Corrosion protection of steel members using an Al-Zn base sacrificial anode and fiber sheet in an atmospheric environment10.1016/j.conbuildmat.2019.07.067 ↗
3. Prevention of steel corrosion in concrete exposed to seawater with submerged sacrificial anodes10.1016/S0010-938X(01)00168-8 ↗
4. Novel hybrid sacrificial anodes based on high phosphorus pig iron and Zn10.1016/j.corsci.2021.109616 ↗
5. Cathodic protection and cathodic preventionin concrete: principles and applications10.1023/A:1003404428827 ↗
6. Cathodic protection with sacrificial anodes10.1515/CORRREV.2006.24.3-4.231 ↗
7. Contribution of sacrificial anode in reinforced concrete patch repair: results of numerical simulations10.1016/j.conbuildmat.2018.05.063 ↗
8. Galvanic anodes for reinforced concrete structures: a review10.5006/2613 ↗
9. A comparative investigation on cathodic protections of three sacrificial anodes on chloride-contaminated reinforced concrete10.1016/j.conbuildmat.2020.118476 ↗
10. Intelligentization of traditional sacrificial anode Zn by Mg-alloying for reinforcing steel10.1016/j.corsci.2021.109943 ↗
11. The performance of Al–Zn–In–Mg–Ti sacrificial anode in simulated deep water environment10.1016/j.corsci.2013.07.029 ↗
12. Study on Al-Zn-In alloy as sacrificial anodes in seawater environment10.1007/s11802-019-3788-7 ↗
13. Influence of cooling rate on the corrosion behavior of Al–Zn–In–Mg–Ag sacrificial anode10.1016/j.jmrt.2024.03.163 ↗
14. Corrosion control by using aluminium as sacrificial anode cathodic protection (SACP) in geopolymer reinforced concrete
15. The corrosion behaviour of Al–Zn–In–Mg–Ti alloy in NaCl solution10.1016/j.corsci.2009.10.010 ↗
16. Corrosion mechanism of Al, Al–Zn and Al–Zn–Sn alloys in 3wt% NaCl solution10.1016/j.corsci.2014.07.018 ↗
17. Influence of alloying elements and microstructure on aluminium sacrificial anode performance: case of Al–Zn10.1023/A:1003684219989 ↗
18. Influence of silicon on the corrosion behaviour of Al–Zn–In–Mg–Ti sacrificial anode10.1016/j.corsci.2011.07.039 ↗
19. Evaluating the performance of aluminum sacrificial anodes with different concentration of Gallium in artificial sea water10.3390/coatings12010053 ↗
20. Effect of alloy elements on the performance of Al sacrificial anode
21. Influence of Sn, Cd, and Si addition on the electrochemical performance of Al–Zn–In sacrificial anodes10.1002/maco.201911336 ↗
22. The influence of alloying elements on aluminum anodes in sea water
23. Effect of Mg Content on the Performance of Al-Zn-Mg Sacrificial Anodes10.1007/s11665-007-9037-z ↗
24. Effects of alloying with Sn and Mg on the microstructure and electrochemical behavior of cast aluminum sacrificial anodes
25. Electrochemical performance of pure Al, Al–Sn, Al–Mg and Al–Mg–Sn anodes for Al-air batteries10.1016/j.jallcom.2019.151708 ↗
26. The effect of increasing the amount of indium alloying material on the efficiency of sacrificial aluminium anodes10.3390/ma14071755 ↗
27. Comprehensive model for the activation mechanism of Al–Zn alloys produced by indium10.1016/j.corsci.2004.05.002 ↗
28. Electrochemical behaviour and discharge characteristics of an Al–Zn–In–Sn anode for Al-air batteries in an alkaline electrolyte10.1016/j.jallcom.2020.155599 ↗
29. The influence of Ti and Zr on electrochemical properties of aluminum sacrificial anodes10.1016/j.msea.2006.06.011 ↗
30. Optimization of biodiesel production from camelina oil using orthogonal experiment10.1016/j.apenergy.2011.04.041 ↗
31. The special role of anodic second phases in the micro-galvanic corrosion of EW75 Mg alloy10.1016/j.electacta.2015.12.075 ↗
32. Corrosion of Mg-9Al alloy with minor alloying elements (Mn, Nd, Ca, Y and Sn)10.1016/j.matdes.2017.05.048 ↗
33. The role of trace Sc and Y in the corrosion resistance of cold drawn Al-0.2Ce based alloys with high electrical conductivity10.1016/j.jallcom.2021.160708 ↗
34. Corrosion analysis of Al–Zn–In–Mg–Ti–Mn sacrificial anode alloy10.1016/j.jallcom.2010.02.174 ↗
35. In situ corrosion analysis of Al-Zn-In-Mg-Ti-Ce sacrificial anode alloy10.1016/j.matchar.2012.01.003 ↗
36. Nanoscale corrosion mechanism at grain boundaries of the Al–Zn–Mg alloy investigated by open-loop electric potential microscopy10.1021/acs.jpcc.2c08322 ↗
37. The effect of small addition of tin and indium on the corrosion behavior of aluminium in chloride solution10.1016/j.jallcom.2010.06.055 ↗
38. Effect of grain boundary characteristics on intergranular corrosion resistance of 6061 aluminum alloy extrusion10.1007/s11661-002-0274-3 ↗
39. Effect of aging on the microstructure and stress corrosion resistance of Al–Zn-Mg alloy
40. Microstructure, mechanical property, in vitro biodegradation behavior and biocompatibility of as-extruded Mg-2Zn-0.2Zr-xNd (x = 0.2, 0.6, 1.0) alloys10.1016/j.matchar.2023.113214 ↗
41. Development of the highly corrosion resistant AZ31 magnesium alloy by the addition of a trace amount of Ti10.1016/j.jallcom.2015.12.131 ↗
42. The impact of indium metal as a minor bimetal on the anodic dissolution and passivation performance of zinc for alkaline batteries: part I—potentiodynamic, potentiostatic, XRD, SEM, and EDAX studies10.1007/s10008-021-04998-8 ↗
43. Indium chloride as an electrolyte additive for primary aqueous Mg batteries10.1016/j.electacta.2021.137916 ↗
44. Chemical solution deposition of ZnO nanostructure films: morphology and substrate angle dependency10.1016/j.ceramint.2012.01.004 ↗
45. Corrosion characteristics of single-phase Mg–3Zn alloy thin film for biodegradable electronics10.1016/j.jma.2023.06.016 ↗
46. Pulse electrodeposited PtSn electrocatalyst on a PEDOT/graphene-based electrode for ethanol oxidation in an acidic medium10.1016/j.ijhydene.2018.09.010 ↗
47. Self-generating construction of applicable corrosion-resistant surface structure of magnesium alloy
48. Activation of aluminium by indium ions in chloride solutions10.1016/S0013-4686(96)00236-8 ↗
49. Exploration of the potential activating elements in aluminum-based sacrificial anodes based on the activating mechanisms10.1016/j.jmrt.2024.01.255 ↗
50. Electrochemical behavior of Mg-Al-Zn-In alloy as anode materials in 3.5wt% NaCl solution10.1016/j.electacta.2017.03.119 ↗
51. Self-generating construction of applicable corrosion-resistant surface structure of magnesium alloy10.1016/j.corsci.2021.109378 ↗
52. Analysis of loss in current efficiency of aluminum alloy sacrificial anode in aqueous sodium chloride
53. Activation behavior of aluminum sacrificial anodes in sea water
54. In situ corrosion analysis of Al-Zn-In-Mg-Ti-Ce sacrificial anode alloy10.1016/j.matchar.2012.01.003 ↗