journal article·2025-01

Effect of laser remelting on the microstructure and properties of an AlCoFeNi eutectic high-entropy alloy fabricated through double-wire arc additive manufacturing

Yifei Huang, Xizhang Chen, Weimin Wu, Yu Wang, Yanhu Wang

Publisher page

Abstract

Additive manufacturing (AM) technology is a new method for preparing eutectic high-entropy alloys (EHEAs). The resulting EHEAs have excellent mechanical properties. However, in engineering, material failure, such as wear or fatigue fracture, often occurs on the surfaces of components. There is no report on surface modification and strengthening of additively manufactured EHEAs. Therefore, this study successfully utilized laser remelting (LR) technology to enhance the surface properties of an AlCoFeNi EHEA fabricated by using double-wire arc AM technology. After LR, the distance between adjacent regular eutectic regions and lamellar spacing of the EHEAs significantly decreased, and the proportion of strictly semicoherent face-centered cubic/body-centered cubic interfaces increased. When microhardness increased from 277.7 HV to 302.3 HV, the average friction coefficient and wear rate of the alloys decreased by 32.5 % and 51.1 %, respectively, and hardness and wear resistance significantly improved. This study has laid a solid foundation for the engineering application of the combination of LR and AM and also provided new ideas for improving the surface performance of additively manufactured EHEAs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Fabrication and mechanical properties of AlCoNiCrFe high-entropy alloy particle reinforced Cu matrix composites10.1016/j.jallcom.2015.07.125 ↗
3. Significant transitions of microstructure and mechanical properties in additively manufactured Al–Co–Cr–Fe–Ni high-entropy alloy under heat treatment10.1016/j.msea.2021.141257 ↗
4. Factors determining solid solution phase formation and stability in CoCrFeNiX0.4 (X=Al, Nb, Ta) high entropy alloys fabricated by powder plasma arc additive manufacturing10.1016/j.jallcom.2020.157625 ↗
5. Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating10.1016/j.apsusc.2016.11.176 ↗
6. Microstructure evolution and wear behavior of the laser cladded CoFeNi2V0.5Nb0.75 and CoFeNi2V0.5Nb high-entropy alloy coatings10.1007/s11666-016-0397-5 ↗
7. Dry sliding wear behavior of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V substrate10.1016/j.matdes.2012.04.049 ↗
8. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
9. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
10. A review on nano-/ultrafine advanced eutectic alloys10.1016/j.jallcom.2020.154226 ↗
11. Enabling stronger eutectic high-entropy alloys with larger ductility by 3D printed directional lamellae
12. Designing eutectic high entropy alloys of CoCrFeNiNbx10.1016/j.jallcom.2015.09.153 ↗
13. Microstructure and properties of novel CoCrFeNiTax eutectic high-entropy alloys10.1016/j.jallcom.2017.11.075 ↗
14. Microstructure and mechanical properties of CoCrFeNiZrx eutectic high-entropy alloys10.1016/j.matdes.2017.08.030 ↗
15. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.actamat.2017.07.041 ↗
16. A novel Fe20Co20Ni41Al19 eutectic high entropy alloy with excellent tensile properties10.1016/j.matlet.2018.01.017 ↗
17. Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing10.1038/s41586-022-04914-8 ↗
18. Simultaneously enhanced strength-ductility of AlCoCrFeNi2.1 eutectic high-entropy alloy via additive manufacturing10.1016/j.msea.2021.142327 ↗
19. CoFeNi twisted wire + Al wire arc additive manufacturing of AlCoFeNi eutectic and near-eutectic high entropy alloys10.1016/j.jmrt.2024.06.018 ↗
20. Double-wire arc additive manufacturing of AlCoFeNi eutectic high entropy alloy with balanced strength and plasticity10.1016/j.matlet.2024.136312 ↗
21. Dual wire arc additive manufacturing of compositionally graded Alx-Co-Cr-Fe-Ni high-entropy alloy10.1016/j.jmrt.2024.02.089 ↗
22. Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.msea.2021.142558 ↗
23. Effect of warm-rolling on microstructure and superior mechanical properties of a cost-effective AlCrFe2Ni2 high entropy alloy10.1016/j.jallcom.2023.169783 ↗
24. Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae10.1038/s41467-019-08460-2 ↗
25. Grain refinement and localized amorphization of additively manufactured high-entropy alloy matrix composites reinforced by nano ceramic particles via selective-laser-melting/remelting10.1016/j.coco.2020.03.001 ↗
26. Influence of laser remelting on organization, mechanical properties and corrosion resistance of Fe-based amorphous composite coating10.1016/j.surfcoat.2021.127081 ↗
27. Enhanced structural refinement on eutectic medium-entropy alloy CrCoNiNb0.48 by laser remelting10.1016/j.matlet.2021.130710 ↗
28. Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy10.1016/j.jallcom.2021.163207 ↗
29. Superior corrosion-resistant nanostructured hypoeutectic CrCoNi-based medium-entropy alloy processed by laser surface remelting10.1016/j.jallcom.2023.171802 ↗
30. Effect of heat treatment on toughness improvement and microstructure of Co35Cr10Ni43Ti12 medium-entropy alloy fabricated by powder plasma arc additive manufacturing10.1016/j.jallcom.2024.174561 ↗
31. Microstructure and wear resistance of an intermetallic-based Al0.25Ti0.75CoCrFeNi high entropy alloy10.1016/j.matchemphys.2017.06.034 ↗
32. Strength and ductility enhancement of high-entropy FeCoNi2Al0.9 alloy by ultrasonically refining eutectic structures10.1016/j.scriptamat.2022.115154 ↗
33. Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys10.1016/j.jallcom.2019.153558 ↗
34. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites10.1016/j.optlastec.2016.04.009 ↗
35. Effect of cooling rate on residual stress and mechanical properties of laser remelted ceramic coating10.1016/j.jeurceramsoc.2018.04.020 ↗
36. Laser directed energy deposited eutectic high entropy alloy with tailored lamella structure via interlayer pause strategy
37. Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy, AlCoCrFeNi2.110.1016/j.jmst.2020.04.073 ↗
38. Design of a new cobalt base nano-lamellar eutectic high entropy alloy10.1016/j.scriptamat.2021.113993 ↗
39. Anisotropic co-deformation behavior of nanolamellar structures in additively manufactured eutectic high entropy alloys10.1016/j.actamat.2024.119885 ↗
40. Laser remelting induces grain refinement and properties enhancement in high-speed laser cladding AlCoCrFeNi high-entropy alloy coatings10.1016/j.intermet.2022.107686 ↗
41. Surface modification for AlCoCrFeNi2.1 eutectic high-entropy alloy via laser remelting technology and subsequent aging heat treatment10.1016/j.jallcom.2021.162380 ↗
42. A quantitative understanding on the mechanical behavior of AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.jallcom.2020.156610 ↗
43. The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals10.1007/s10853-019-04160-w ↗
44. A review of recent advances in tribology10.1007/s40544-020-0367-2 ↗
45. The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures10.1016/j.wear.2019.03.002 ↗
46. Effects of laser remelting on microstructure and tribological properties of plasma–sprayed Fe45Mn35Co10Cr10 high–entropy alloy coating10.1016/j.surfcoat.2023.130082 ↗