Mechanical behaviour of low-, medium- and high-entropy Ti-Hf-Zr-Ni-Cu-Co shape memory alloys
Source abstract
Abstract
The mechanical behaviour was studied in twelve senary Ti-Hf XZr X-Ni-Cu XCo X alloys with various configuration entropies, which were regulated by the X value - concentration of doping elements (Hf, Zr, Cu, and Co) that varied from 1 at% to 17 at% and the concentration of the Ni group (Ni+Cu+Co) that varied from 49 to 51 at%. The stress vs strain curves were obtained at three temperatures (-100 °C, 22 °C and 100 °C) at which the alloys were in different states (martensite, austenite, or a mixture of both). It was found that the senary Ti-Hf-Zr-Ni-Cu-Co alloys could undergo deformation via martensite reorientation, stress-induced martensitic transformation, and dislocation slip. The activation of the mechanisms depends on the deformation temperature compared to the temperatures of the martensitic transformations, as in the binary NiTi alloys. An increase in the X value from 1 to 10 at% increased the yield limit for dislocation slip in the austenite phase, while a further rise in the X value by 17 at% decreased this limit. An increase in the X value decreased the strain up to failure. The larger the [Ni] concentration or deformation temperature, the more pronounced the reduction in strain up to failure. An increase in X value from 1 to 5 at% significantly changed the fracture mechanisms from ductile to brittle due to the suppression of the dislocation movement.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
2. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
3. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
4. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
5. High entropy shape memory alloys
6. Directions for high-temperature shape memory alloys’ improvement: straight way to high-entropy materials?10.1007/s40830-015-0039-7 ↗
7. Shape memory characteristics of (TiZrHf)50Ni25Co10Cu15 high entropy shape memory alloy10.1016/j.scriptamat.2018.11.023 ↗
8. Wide-temperature-range perfect superelasticity and giant elastocaloric effect in a high entropy alloy10.1080/21663831.2019.1659436 ↗
9. A strategy of designing high-entropy alloys with high-temperature shape memory effect
10. Effect of solution treatment on the shape memory functions of (TiZrHf)50Ni25Co10Cu15 high entropy shape memory alloy10.3390/e21101027 ↗
11. Superelasticity of (TiZrHf)50Ni25Co10Cu15 high entropy shape memory alloy10.1016/j.scriptamat.2020.04.017 ↗
12. Investigation and composition characterization of a ‘‘NiTi-like’’ alloy combining high temperature shape memory and high entropy10.1007/s40830-020-00290-2 ↗
13. Chemical complexity, microstructure and martensitic transformation in high entropy shape memory alloys10.1016/j.intermet.2020.106792 ↗
14. Microstructure and mechanical properties of (TiZrHf)50(NiCoCu)50 high-entropy alloys10.1007/s12540-019-00383-3 ↗
15. Transformation behavior and superelasticity of TiZrHfNiCoCu multi-component high-temperature shape memory alloys10.1016/j.jallcom.2021.161108 ↗
16. Effect of off-stoichiometric compositions on microstructures and phase transformation behavior in Ni-Cu-Pd-Ti-Zr-Hf high entropy shape memory alloys10.1016/j.jallcom.2020.157467 ↗
17. A high-entropy high-temperature shape memory alloy with large and complete superelastic recovery10.1080/21663831.2021.1893233 ↗
18. High-temperature shape memory properties of Cu15Ni35Ti25Hf12.5Zr12.5 high-entropy alloy10.1016/j.jmrt.2021.07.008 ↗
19. High-temperature superelasticity and shape memory effect in [011] B2-oriented single crystals of the (TiZrHf)50Ni25Cu15Co10 high-entropy alloy10.1016/j.matlet.2022.133274 ↗
20. Shape memory effect and superelasticity of [001]-Oriented (TiZrHf)50Ni25Co10Cu15 high-entropy alloy crystals under compression10.1007/s11182-023-02882-8 ↗
21. Effect of homogenization on the transformation temperatures and mechanical properties of Cu15Ni35Hf12.5Ti25Zr12.5 and Cu15Ni35Hf15Ti20Zr15 high-entropy shape memory alloys10.3390/ma16083212 ↗
22. Improving the functional stability of TiNi-based shape memory alloy by multi-principal element design10.1016/j.msea.2023.144999 ↗
23. Transformation behavior and superelasticity of TiZrHfNiCoCu multi-component high-temperature shape memory alloys10.1016/j.jallcom.2021.161108 ↗
24. The influence of the doping elements on the structure and the martensitic transformations in the Ti50-2xHfxZrxNi50-2xCuxCox shape memory alloys10.1016/j.matlet.2022.133670 ↗
25. The influence of the chemical composition of the Ti-Hf-Zr-Ni-Cu-Co shape memory alloys on the structure and the martensitic transformations10.1016/j.jallcom.2023.172040 ↗
26. The effect of increasing chemical complexity on the mechanical and functional behavior of NiTi-related shape memory alloys10.1007/s40830-020-00284-0 ↗
27. Nanoprecipitates enhanced the yield strength and output work of (TiHfZr)50(NiCu)50 high-entropy shape memory alloys10.1016/j.jallcom.2023.171504 ↗
28. Orientation dependence of shape memory effect and superelasticity in (TiZrHf)50Ni25Co10Cu15 high-entropy alloy single crystals10.1007/s40830-022-00411-z ↗
29. Plastic deformation of NiTi shape memory alloys10.1016/j.actamat.2012.09.023 ↗
30. A revisit to atomistic rationale for slip in shape memory alloys10.1016/j.pmatsci.2016.10.002 ↗
31. Ab initio prediction of atomic location of third elements in B2-type TiNi10.2320/matertrans.M2017333 ↗
32. The use of hard and soft sphere models for the evaluation of lattice distortion in B2 high-entropy shape memory alloys10.1134/S1029959924020024 ↗
33. Effect of oriented γ′ precipitates on shape memory effect and superelasticity in Co-Ni-Ga single crystals10.1016/j.actamat.2014.01.019 ↗