journal article·2025-01

Effect of SiC particles on microstructure and mechanical properties of SiCp/AZ91 magnesium matrix composite brazed joint

Xiaozhe Ge, Kaibo Nie, Kunkun Deng, Chao Xu, Shilei Wang

Publisher page

Abstract

The impact of SiC particles on the microstructure, mechanical properties, and fracture morphology of magnesium alloy brazed joints was investigated. The brazing experiments of AZ91+AZ91, AZ91+SiC p/AZ91, and SiC p/AZ91+SiC p/AZ91 were carried out under the same technological conditions by using the self-designed special filler metal for magnesium matrix composites. The impact of SiC particles on the microstructure and mechanical properties of brazed joints was analyzed. The addition of Ti can effectively enhance the wettability of filler metal on SiC particles. The shear strength of SiC p/AZ91+SiC p/AZ91 joints is 76.0 MPa. The shear strength of the joint is 43.4 % higher than that of AZ91+ AZ91.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Effect of submicron size SiC particulates on microstructure and mechanical properties of AZ91 magnesium matrix composites10.1016/j.jallcom.2010.05.159 ↗
2. Microstructure and mechanical properties of SiCp/AZ91 composite deformed through a combination of forging and extrusion process10.1016/j.matdes.2010.03.021 ↗
3. Characteristics and mechanical properties of magnesium matrix composites reinforced with micron/submicron/nano SiC particles10.1016/j.jallcom.2016.06.232 ↗
4. Crystallographic study of nucleation in SiC particulate reinforced magnesium matrix composite
5. Effect of hot extrusion on microstructures and mechanical properties of SiC nanoparticles reinforced magnesium matrix composite10.1016/j.jallcom.2011.09.099 ↗
6. Effect of SiC nanowires on adhesion and wear resistance of hydroxyapatite coating on AZ31 magnesium alloy
7. Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB2 co-reinforced Al-Zn-Mg-Cu composites
8. Summary of composite material-metal connection technology
9. Feasibility of joining AZ31B magnesium metal matrix composite by friction welding10.1016/j.matdes.2010.09.028 ↗
10. SiC particle reinforced Al matrix composites brazed on aluminum body for lightweight wear resistant brakes10.1016/j.ceramint.2021.12.313 ↗
11. Microstructures and mechanical properties of tungsten inert gas welded magnesium alloy AZ91D Joints10.2355/isijinternational.46.1200 ↗
12. Gas-tungsten arc welding of AZ91 magnesium alloy10.1016/j.jallcom.2011.07.105 ↗
13. Nd:YAG laser butt welding of a 12 vol% SiC particulate-reinforced magnesium alloy composite10.1016/j.matlet.2007.01.010 ↗
14. CNTs distribution and ductility improvement mechanisms in oscillating laser-arc hybrid welding of AZ31B magnesium alloy10.1016/j.compositesa.2022.107280 ↗
15. A study of weldability and fracture modes in electron beam weldments of AZ series magnesium alloys10.1016/j.msea.2006.07.098 ↗
16. Experimental study of electron beam welding of magnesium alloys10.1007/s12598-011-0304-7 ↗
17. Microstructure and mechanical properties of dissimilar inertia friction welding of 7A04 aluminum alloy to AZ31 magnesium alloy10.1016/j.jallcom.2016.11.218 ↗
18. On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures10.1016/j.msea.2011.01.085 ↗
19. Characterization of High-Frequency Induction Brazed Magnesium Alloy Joint with an Al-Mg-Zn Filler Metal10.1007/s11665-010-9674-5 ↗
20. Interface behaviour of brazing seam of contact-reaction brazing an AZ31 magnesium with amorphous filler metal10.1016/j.jmapro.2021.05.061 ↗
21. Acoustic emission analysis for tool wear state during friction stir joining of SiCp/Al composite10.1007/s00170-018-2565-x ↗
22. Development of a Mg-Al filler metal for brazing magnesium alloy AZ31B10.1016/j.matlet.2016.06.085 ↗
23. Contact-reaction brazing of an AZ31 magnesium/3003 aluminum alloy using a silver-copper-zinc interlayer10.1016/j.jmatprotec.2017.06.041 ↗
24. Microstructural characteristics of joint region during diffusion-brazing of magnesium alloy and stainless steel using pure copper interlayer10.1016/S1003-6326(13)62505-4 ↗
25. Interface characteristics and mechanical properties of the induction brazed joint of magnesium alloy AZ31B with an Al-based filler metal10.1016/j.matdes.2012.01.005 ↗
26. Study on low temperature brazing of magnesium alloy to aluminum alloy using Sn-xZn solders10.1016/j.matdes.2012.02.021 ↗
27. Microstructure and mechanical properties of magnesium alloy AZ31B brazed joint using a Zn-Mg-Al filler metal10.1016/S1005-0302(10)60117-X ↗
28. The early stage oxidation and evaporation of Mg–9%Al–1%Zn alloy10.1016/S0010-938X(03)00151-3 ↗
29. Oxidation of magnesium alloys at elevated temperatures in air: a review10.1016/j.corsci.2016.06.018 ↗
30. Research on reaction brazing of Ti layer-coated SiCp/Al composites using Al-based filler metal foil10.1080/09276440.2019.1580531 ↗
31. Availability of in-situ reinforced active-transient liquid phase bond with good wettability for 70vol% SiCp/A356 composite using Al-Mg-Ga-Ti interlayer
32. Effects of Ti on the forming, microstructure and mechanical properties of laser welded joints of SiCp/2A14 composites10.1016/j.jmrt.2021.11.017 ↗
33. Active-Transient Liquid Phase (A-TLP) Bonding of High Volume Fraction SiC Particle Reinforced A356 Matrix Composite10.2320/matertrans.M2014295 ↗
34. The study of microstructure, corrosion resistance and mechanical properties of ultrasonic assisted welding-brazing of Ti–Mg10.1016/j.jmrt.2022.01.037 ↗
35. Ultra-rapid transient liquid phase bonding of Mg alloys within 1 s in air by ultrasonic assistance10.1016/j.matdes.2018.11.015 ↗
36. Control of intermetallic compounds in Ultrasonic-Assisted Sn soldering of Mg/Al alloys10.1016/j.matdes.2022.111235 ↗
37. Evaluation of diffusion welding of 6061 aluminum and AZ31 magnesium alloys without using an interlayer10.1016/j.matdes.2014.09.020 ↗
38. S. Rouhi, A. Mostafapour, M. Ashjari, Effects of welding environment on microstructure and mechanical properties of friction stir welded AZ91C magnesium alloy joints, Science and Technology of Welding and Joining 00 (2015). https://doi.org/10.1179/1362171815Y.0000000058.10.1179/1362171815Y.0000000058 ↗
39. Microstructure and properties of MgAlCd filler metal scraped brazing AZ31 magnesium alloy joint10.1016/j.jmrt.2022.10.150 ↗
40. B. Tang J. Li J. Ye H. Luo Y. Wang B. Guan Y. Lu X. Chen K. Zheng F. Pan Strengthening Mechanism and Microstructure of Deformable Ti Particles Reinforced AZ91 Composite. https://doi.org/10.1007/s40195-022-01428-0.10.1007/s40195-022-01428-0 ↗
41. Formation of intermetallic compounds during reaction between Ti and Al–Mg alloys with various Mg contents10.1016/j.jmst.2023.02.052 ↗
42. Research on interfacial layer of laser-welded aluminum to titanium10.1016/j.matchar.2019.06.012 ↗