High-performance honeycomb porous microwave absorbers: Gelatin-based carbon nanotube/nickel nanowire aerogels
Source abstract
Abstract
Biomass-derived carbon absorbent materials have received significant attention due to their renewability, diverse sources, and ease of preparation. In this work, a honeycomb porous electromagnetic wave absorber with excellent performance was successfully prepared by blending gelatin and carbon nanotubes, followed by freeze-drying. Metallic nickel nanowires were then introduced as a second phase using an in-situ growth method. The minimum reflection loss (RL) was -36.1 dB at a thickness of 3.1 mm, with the effective absorption bandwidth (EAB) covering the entire X-band. Additionally, the aerogel exhibited a very low density (36 mg/cm3) and remarkable strength, capable of supporting over 1658 times its weight for more than 24 h without deformation. These properties make it highly valuable for commercial use and provide new inspiration for the future development of biomass carbon-based electromagnetic absorbing materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Dimensional design and core–shell engineering of nanomaterials for electromagnetic wave absorption10.1002/adma.202107538 ↗
2. Hollow engineering of sandwich NC@Co/NC@MnO2 composites toward strong wideband electromagnetic wave attenuation10.1016/j.jmst.2023.08.020 ↗
3. A flexible microwave shield with tunable frequency-transmission and electromagnetic compatibility10.1002/adfm.201900163 ↗
4. Multifunctional organic–inorganic hybrid aerogel for self-cleaning, heat-insulating, and highly efficient microwave absorbing material10.1002/adfm.201807624 ↗
5. Electromagnetic absorption materials: current progress and new frontiers10.1016/j.pmatsci.2022.100946 ↗
6. Fabrication of S-doped Ti3C2Tx materials with enhanced electromagnetic wave absorbing properties10.1016/j.jallcom.2021.161942 ↗
7. Recent advances in radio-frequency negative dielectric metamaterials by designing heterogeneous composites10.1007/s42114-022-00479-2 ↗
8. Dielectric behavior of Fe3N@C composites with green synthesis and their remarkable electromagnetic wave absorption performance10.1016/j.jcis.2020.08.087 ↗
9. Heterostructured BN@Co-C@C endowing polyester composites excellent thermal conductivity and microwave absorption at C band10.1002/adfm.202313544 ↗
10. Shape Anisotropic Chain-Like CoNi/polydimethylsiloxane composite films with excellent low-frequency microwave absorption and high thermal conductivity10.1002/adma.202410186 ↗
11. Hierarchical engineering of CoNi@Air@C/SiO2@Polypyrrole multicomponent nanocubes to improve the dielectric loss capability and magnetic-dielectric synergy10.1016/j.jmst.2022.10.069 ↗
12. An electromagnetic wave absorbing material with self-healing function
13. Cellulose-chitosan framework/polyailine hybrid aerogel toward thermal insulation and microwave absorbing application10.1016/j.cej.2020.125190 ↗
14. Research advances in composition, structure and mechanisms of microwave absorbing materials10.1016/j.compositesb.2021.109173 ↗
15. Synthesis and microwave absorption property of flexible magnetic film based on graphene oxide/carbon nanotubes and Fe3O4nanoparticles10.1039/C4TA02815E ↗
16. Research progress on electromagnetic wave absorption based on magnetic metal oxides and their composites10.1007/s42114-023-00694-5 ↗
17. An equivalent substitute strategy for constructing 3D ordered porous carbon foams and their electromagnetic attenuation mechanism10.1007/s40820-022-00900-x ↗
18. Advances and mechanisms in polymer composites toward thermal conduction and electromagnetic wave absorption10.1016/j.scib.2023.04.036 ↗
19. Interface engineering and impedance matching strategy to develop core@shell urchin-like NiO/Ni@carbon nanotubes nanocomposites for microwave absorption10.1016/j.jmst.2023.08.022 ↗
20. Tunable and improved microwave absorption of flower-like core@shell MFe2O4@MoS2 (M = Mn, Ni and Zn) nanocomposites by defect and interface engineering
21. Multifunctional microwave absorption materials: construction strategies and functional applications10.1039/D4MH00793J ↗
22. Biomass-derived ferrous magnetic carbon-based nanocomposites from loofah collaterals for excellent electromagnetic wave-absorbing materials10.1016/j.jallcom.2023.172384 ↗
23. Ultralight cellular foam from cellulose nanofiber/carbon nanotube self-assemblies for ultrabroad-band microwave absorption10.1021/acsami.9b03731 ↗
24. Multiple synergistic losses in the absorption of electromagnetic waves by three-dimensional cross-linked carbon fiber10.1016/j.carbon.2022.04.035 ↗
25. Constructing hierarchical structure via in situ growth of CNT in SiO2-coated carbon foam for high-performance EMI shielding application10.1016/j.compscitech.2022.109372 ↗
26. Electromagnetic and absorption properties of U-type barium hexaferrite-epoxy composites10.1016/j.jmmm.2018.06.027 ↗
27. Electromagnetic absorption and mechanical properties of natural rubber composites based on conductive carbon black and Fe3O410.3390/ma15196532 ↗
28. Synthesis and characterization of a new mesoporous carbon-containing electromagnetic wave absorber10.1007/s11837-022-05485-9 ↗
29. A simple strategy to develop heterostructured carbon paper/Co nanoparticles composites with lightweight, tunable and broadband microwave absorption
30. Anion regulating endows core@shell structured hollow carbon spheres@MoSxSe2−x with tunable and boosted microwave absorption performance10.1007/s12274-023-5433-4 ↗
31. Multifunctional magnetic Ti3C2Tx MXene/graphene aerogel with superior electromagnetic wave absorption performance10.1021/acsnano.0c09982 ↗
32. Large-scale preparation of electrically conducting cellulose nanofiber/carbon nanotube aerogels: ambient-dried, recyclable, and 3D-Printable10.1016/j.carbon.2022.03.056 ↗
33. Tailoring high-electroconductivity carbon cloth coated by nickel cobaltate/nickel oxide: a case of transition from microwave shielding to absorption10.1016/j.carbon.2021.07.002 ↗
34. Hollow Ni/C microspheres derived from Ni-metal organic framework for electromagnetic wave absorption10.1016/j.cej.2019.123207 ↗
35. Synthesis of core–shell Co@S-doped carbon@ mesoporous N-doped carbon nanosheets with a hierarchically porous structure for strong electromagnetic wave absorption10.1039/D0TA09393A ↗
36. Two-dimensional CoNi@mesoporous carbon composite with heterogeneous structure toward broadband microwave absorber10.1007/s12274-022-4617-7 ↗
37. Hierarchical porous carbon nanotube skeleton supported polydimethylsiloxane composite with electrical continuity for high-performance electromagnetic shielding10.1002/admt.202100013 ↗
38. Three-dimensional macroassembly of hybrid C@CoFe nanoparticles/reduced graphene oxide nanosheets towards multifunctional foam10.1016/j.carbon.2019.10.074 ↗
39. Design of ultralight and stable Ti3C2Tx/SiCnw hybrid aerogel with hierarchical structure and heterogeneous interface for electromagnetic wave absorption10.1016/j.carbon.2023.118697 ↗
40. Interfacial polarization loss improvement induced by the hollow engineering of necklace-like PAN/carbon nanofibers for boosted microwave absorption
41. Synthesis of lightweight N-doped graphene foams with open reticular structure for high-efficiency electromagnetic wave absorption10.1016/j.cej.2019.02.193 ↗
42. Spinel structured MFe2O4 (M = Fe, Co, Ni, Mn, Zn) and their composites for microwave absorption: a review10.1016/j.cej.2021.131160 ↗
43. Scalable fabrication of lightweight carbon nanotube aerogel composites for full X-band electromagnetic wave absorption10.1016/j.carbon.2024.118811 ↗
44. Magnetic carbon nanofibers containing uniformly dispersed Fe/Co/Ni nanoparticles as stable and high-performance electromagnetic wave absorbers10.1039/C4TA03732D ↗
45. CoNi nanoparticles encapsulated by nitrogen-doped carbon nanotube arrays on reduced graphene oxide sheets for electromagnetic wave absorption10.1016/j.cej.2019.123208 ↗
46. Microwave absorption property of Ni–Co–Fe–P-coated flake graphite prepared by electroless plating10.1016/j.jallcom.2011.12.014 ↗
47. Pristine and hybrid nickel nanowires: template-, magnetic field-, and surfactant-free wet chemical synthesis and Raman studies10.1021/jp110498x ↗
48. Synthesis and electromagnetic shielding performance of nickel nanowires with controllable morphology10.1016/j.matlet.2018.10.074 ↗
49. 1D-3D biological template loaded NiCo nanowires at high temperatures as a broadband, lightweight electromagnetic wave absorbing material10.1016/j.powtec.2023.118670 ↗
50. Assembly of partially unzipped multiwalled carbon nanotubes into ultralight, highly efficient and multifunctional electromagnetic wave absorbing aerogel10.1016/j.carbon.2023.118220 ↗
51. Initiating VB-group laminated NbS2 electromagnetic wave absorber toward superior absorption bandwidth as large as 6.48 GHz through phase engineering modulation10.1002/adfm.202108194 ↗
52. Tailoring self-polarization of bimetallic organic frameworks with multiple polar units toward high-performance consecutive multi-band electromagnetic wave absorption at gigahertz10.1002/adfm.202201129 ↗
53. Novel binary cobalt nickel oxide hollowed-out spheres for electromagnetic absorption applications10.1016/j.cej.2019.122797 ↗
54. Hierarchical flower-like Fe3O4/MoS2 composites for selective broadband electromagnetic wave absorption performance10.1016/j.compositesa.2019.105760 ↗
55. PVP-assisted transformation of ZIF-67 into cobalt layered double hydroxide/carbon fiber as electromagnetic wave absorber10.1016/j.carbon.2020.11.009 ↗
56. Metal ions-assisted construction of SiO2/MXene/Fe3O4 aerogel as multifunctional electromagnetic wave absorbing material10.1016/j.carbon.2023.118266 ↗
57. Ag nanoparticles embedded in multishell carbon nanoparticles for microwave absorption10.1021/acsanm.1c00749 ↗
58. Synthesis of hierarchical ZnFe2O4@SiO2@RGO core–shell microspheres for enhanced electromagnetic wave absorption10.1021/acsami.7b03330 ↗
59. Protein-derived hybrid carbon nanospheres with tunable microwave absorbing performance in the X-band10.1021/acsaelm.1c00274 ↗
60. Attapulgite modulated thorny nickel nanowires/graphene aerogel with excellent electromagnetic wave absorption performance10.1016/j.cej.2021.128976 ↗
61. Analyses on multiple resonance behaviors and microwave reflection loss in magnetic Co microflowers10.1002/pssb.201147382 ↗
62. Anisotropic, multifunctional and lightweight CNTs@CoFe2O4/polyimide aerogels for high efficient electromagnetic wave absorption and thermal insulation10.1016/j.cej.2022.136388 ↗
63. Achieving tunable electromagnetic absorber via graphene/carbon sphere composites10.1016/j.carbon.2016.09.009 ↗
64. A generalizable strategy for constructing ultralight three-dimensional hierarchical network heterostructure as high-efficient microwave absorber10.1016/j.jcis.2021.07.054 ↗
65. Mixed-dimensional assembly strategy to construct reduced graphene oxide/carbon foams heterostructures for microwave absorption, anti-corrosion and thermal insulation10.1007/s40820-024-01447-9 ↗
66. Multifunctional cellular carbon foams derived from chitosan toward self-cleaning, thermal insulation, and highly efficient microwave absorption properties10.1007/s12274-023-6236-7 ↗
67. A novel synthesis method of magnetic porous carbon composites for microwave absorption10.1016/j.synthmet.2022.117184 ↗
68. Synthesis of MOF-derived porous multi-metal/carbon composites by metal regulation strategy for efficient microwave absorption application10.1007/s10854-023-11640-y ↗
69. Lightweight porous carbon/rGO/Ni chain composite with excellent microwave absorption performance and multi-functional properties10.1016/j.synthmet.2022.117208 ↗
70. Preparation, characterization and microwave absorption properties of porous nickel ferrite hollow nanospheres/helical carbon nanotubes/polypyrrole nanowires composites10.1007/s10854-018-8865-y ↗
71. Microwave absorbing properties of glass fiber/epoxy resin composites tailored with frequency selective surface based on nonwoven of carbon fibers metalized with nickel10.1007/s10854-020-03860-3 ↗
72. Mechanical and electromagnetic wave dissipation features of bilayer absorber filled with hierarchical porous CoNi magnetic alloy and BiVO4/VOOH nanocomposite10.1016/j.vacuum.2024.112963 ↗
73. Synthesis and microwave absorption properties of graphene/nickel composite materials10.1007/s00339-014-8873-6 ↗
74. X-band radar-absorbing structures based on MWCNTs/NiZn ferrite nanocomposites10.1080/14658011.2020.1836882 ↗