Exploring the effects of solution temperature and cooling rate on α phase in a multicomponent titanium alloy: Insights from phase-field simulations
Source abstract
Abstract
The solution temperature and cooling rate during heat treatment of titanium alloys will affect their microstructure and thus mechanical properties. In this study, a phase-field model of the β →α solid state phase transformation in multicomponent titanium alloys is developed to investigate the effects of solution temperature and cooling rate on the microstructural evolution of Ti60 alloy. The thermodynamic calculations, the evolution of equiaxed α phase and solute distribution during solid solution process, the orientation of α lamellae during continuous cooling process, the morphology of α lamellae structure under different cooling rates, and the changing trend of α lamellae spacing, all correspond well with the experimental results. Our work not only gives a clear outlook for the influence of solution temperature and cooling rate on α phase of Ti60 alloy, but also provides a feasible approach for developing heat treatment protocols in actual multicomponent titanium alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Lütjering · 2007
2. Leyens · 2003
3. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
4. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process10.1016/j.msea.2022.143260 ↗
5. Effect of heat-treatment on microstructure and mechanical properties of Ti alloys: an overview
6. Formation of α-Widmanstatten structure: Effects of grain size and cooling rate on the Widmanstatten morphologies and on the mechanical properties in Ti6Al4V alloy10.1016/S0925-8388(01)01571-7 ↗
7. Influence of solution treatment on microstructure and mechanical properties of a near β titanium alloy Ti-733310.1016/j.matdes.2015.06.015 ↗
8. Microstructure and mechanical properties of a novel Ti-Al-Cr-Fe titanium alloy after solution treatment10.1016/j.jallcom.2015.04.038 ↗
9. Microstructure evolution and mechanical properties of near-α Ti-8Al-1Mo-1V alloy at different solution temperatures and cooling rates10.1016/j.jallcom.2017.08.165 ↗
10. Influence of heating temperature and cooling conditions on structure and properties of two-phase titanium alloy10.4028/www.scientific.net/SSP.265.646 ↗
11. Effect of solution treatment on the microstructure, micromechanical properties, and kinetic parameters of the β → α phase transformation during continuous cooling of Ti-6Al-4V titanium alloy10.1007/s11665-019-04404-5 ↗
12. Effects of solution temperature and cooling rate on microstructure and micro-hardness of a hot compressed Ti-6Al-4V alloy10.1016/j.vacuum.2018.10.035 ↗
13. Effects of solution temperature and cooling rate on α phases and mechanical properties of a forged Ti-55511 alloy10.1088/2053-1591/ab5252 ↗
14. Effect of cooling rate and aging process on wear behavior of deformed TC21 Ti-alloy10.4028/www.scientific.net/KEM.835.265 ↗
15. On the optimization of temperature and cooling rate to maximize strength and ductility of near α titanium alloy IMI 83410.1016/j.msea.2021.142052 ↗
16. Study on the deformation mechanism of Ti-10Mo-1Fe solid-solution alloys with different cooling rates10.1016/j.jmrt.2023.02.150 ↗
17. Effects of isothermal solution treatment on microstructure evolution and tensile properties of high strength near-β Ti Alloy10.1007/s11665-022-07581-y ↗
18. Effect of different cooling media after solid solution on the microstructure and yield strength in a Ni-Al alloy during aging: experimental measurement and computational modeling10.1007/s11661-019-05400-z ↗
19. Revealing microstructural, textural, and hardness evolution of Ti-6Al-4V sheet cooled from sub beta-transus temperature at different rates10.1007/s11661-022-06737-8 ↗
20. Understanding and design of metallic alloys guided by phase-field simulations10.1038/s41524-023-01038-z ↗
21. Development of phase-field modeling in materials science in China: a review10.1007/s40195-023-01593-w ↗
22. Phase-field model for microstructure evolution at the mesoscopic scale10.1146/annurev-matsci-071312-121703 ↗
23. Recent advances in the design of novel β-titanium alloys using integrated theory, computer simulation, and advanced characterization10.1002/adem.202100152 ↗
24. Recent progress in the simulation of microstructure evolution in titanium alloys10.1016/j.pnsc.2019.05.006 ↗
25. Variant selection during α precipitation in Ti-6Al-4V under the influence of local stress - a simulation study10.1016/j.actamat.2013.06.042 ↗
26. Variant selection by dislocations during α precipitation in α/β titanium alloys10.1016/j.actamat.2014.12.044 ↗
27. Phase-field study on the formation of α variant clusters induced by elastoplastic stress field around the void in titanium alloys10.1016/j.commatsci.2022.111781 ↗
28. Heterogeneous precipitate microstructure design in β-Ti alloys by regulating the cooling rate10.1016/j.actamat.2024.119810 ↗
29. Predicting equilibrium shape of precipitates as function of coherency state10.1016/j.actamat.2012.04.019 ↗
30. Microstructure and transformation texture evolution during α precipitation in polycrystalline α/β titanium alloys - a simulation study10.1016/j.actamat.2015.04.050 ↗
31. Effect of low-angle grain boundaries on morphology and variant selection of grain boundary allotriomorphs and Widmanstätten side-plates10.1016/j.actamat.2016.04.033 ↗
32. Effect of autocatalysis on variant selection of α precipitates during phase transformation in Ti-6Al-4V alloy10.1016/j.commatsci.2016.07.032 ↗
33. Phase field simulations of autocatalytic formation of alpha lamellar colonies in Ti-6Al-4V10.1007/s11661-016-3746-6 ↗
34. Phase field simulation of α/β microstructure in titanium alloy welds10.1088/2053-1591/ab875a ↗
35. Effects of heating rate on the alloy element partitioning and mechanical properties in equiaxed α+β Ti-6Al-4V alloy10.1016/j.jmst.2021.02.061 ↗
36. Phase field simulation of the stress-induced α microstructure in Ti–6Al–4V alloy and its CPFEM properties evaluation10.1016/j.jmst.2020.12.085 ↗
37. A phase-field model for simulating the growth of α sideplates with branching in titanium alloys10.1016/j.jmst.2021.09.070 ↗
38. Heterogeneous precipitate microstructure in titanium alloys for simultaneous improvement of strength and ductility10.1016/j.jmst.2022.02.025 ↗
39. Heterostructures enhance simultaneously strength and ductility of a commercial titanium alloy10.1016/j.actamat.2023.119182 ↗
40. Heterogeneous microstructure enhanced comprehensive mechanical properties in titanium alloys10.1007/s11837-021-04775-y ↗
41. Novel transformation pathway and heterogeneous precipitate microstructure in Ti-alloys10.1016/j.actamat.2020.06.048 ↗
42. Relationship study between the component design and quenching degree for BT22 Alloy
43. On spinodal decomposition10.1016/0001-6160(61)90182-1 ↗
44. Theory of macroscopic periodicity for a phase transition in the solid state
45. Khachaturian · 1983
46. A generalized field method for multiphase transformations using interface fields10.1016/S0167-2789(99)00129-3 ↗
47. Models for numerical treatment of multicomponent diffusion in simple phases10.1063/1.351745 ↗
48. Assessment of atomic mobility for the bcc phase of the Ti-Al-Mo system10.1088/1757-899X/242/1/012019 ↗
49. Phase-field model for binary alloys10.1103/PhysRevE.60.7186 ↗
50. Phase field modeling of simultaneous nucleation and growth by explicitly incorporating nucleation events10.1016/S1359-6462(00)00517-0 ↗
51. Elastic constants of body-centered-cubic titanium monocrystals10.1063/1.1688445 ↗
52. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
53. Effect of heat treatment on the crystallographic orientation evolution in a near-α titanium alloy Ti6010.1016/j.actamat.2017.04.007 ↗
54. Sensitivity of heterogeneous microstructure evolution and preferential variant selection to thermomechanical conditions in a near α titanium alloy10.1016/j.jallcom.2023.169623 ↗
55. A study of epitaxial growth behaviors of equiaxed alpha phase at different cooling rates in near alpha titanium alloy10.1016/j.actamat.2016.10.012 ↗
56. The origin of coarse macrograin during thermo-mechanical processing in a high temperature titanium alloy10.1016/j.jallcom.2018.10.127 ↗
57. Sun · 2015
58. Gao · 2018
59. Titanium alloying in theory and practice
60. Beta titanium alloys and their role in the titanium industry10.1007/BF03220742 ↗
61. Hierarchical nano-martensite-engineered a low-cost ultra-strong and ductile titanium alloy10.1038/s41467-022-33710-1 ↗
62. In situ observations of lattice expansion and transformation rates of α and β phases in Ti–6Al–4V10.1016/j.msea.2004.08.084 ↗
63. Ji · 2018
64. Pseudospinodal mechanism for fine α/β microstructures in β-Ti alloys10.1016/j.actamat.2013.10.026 ↗
65. Microstructure and room-temperature tensile property of Ti-5.7Al-4.0Sn-3.5Zr-0.4Mo-0.4Si-0.4Nb-1.0Ta-0.05C with near equiaxed β grain fabricated by laser directed energy deposition technique10.1016/j.jmst.2021.03.012 ↗