journal article·2025-01

Microstructure and mechanical properties of an elevated temperature L12-type Ni-Co-Cr-Al-Ti-V-B-based high-entropy intermetallic

Zehong Tai, Xiaopeng Wang, Xiao Zong, Xianfei Ding, Junqi Liu, Fantao Kong

Publisher page

Abstract

In this study, a novel L1 2-type Ni 46.6Co 23.3Cr 10Al 9Ti 6V 5B 0.1 high-entropy intermetallic (HEI) with the excellent strength-ductility combination at 25 ℃ and 800 ℃ was prepared by vacuum arc melting. An ultrahigh volume fraction of cubical L1 2-type nanoparticles (∼81 %) was formed uniformly inside the grains after annealing. The intragranular L1 2 phase, FCC nanolayers, and intergranular blocky FCC precipitations constituted the heterogeneous structure. The annealed HEI exhibits high room-temperature yield strength (∼711 MPa) and ultimate tensile strength (∼937 MPa) with large tensile elongation (∼17 %). The room-temperature plasticity is superior to that of many other simple ordered intermetallics. The yield strength can still be maintained at ∼740 MPa with a total strain of about 6.7 % when tested at 800°C, and its strength is higher than many L1 2 nanoparticle-strengthened high-entropy alloys. High strength is primarily attributed to the elevated volume fraction of L1 2 nanoparticles and the significant increase in the antiphase boundary energy caused by the addition of Ti and V elements. The stacking-fault (SF) networks, L-C locks, and K-W locks provide sustained work-hardening capacity, resulting in excellent yield strengths at 25 ℃ and 800 ℃. In addition, the favorable ductility is due to the formation of intragranular disordered FCC nanolayers and grain boundary FCC precipitations, which can avoid premature intergranular fracture.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
2. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
3. Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys10.1016/j.actamat.2011.06.041 ↗
4. Microstructure and wear resistance of an intermetallic-based Al0.25Ti0.75CoCrFeNi high entropy alloy10.1016/j.matchemphys.2017.06.034 ↗
5. Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy10.1007/s10853-012-6260-2 ↗
6. High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys10.1038/s41467-018-06600-8 ↗
7. Effect of Zr content on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.matdes.2016.01.033 ↗
8. Evading strength-ductility trade-off dilemma in TRIP-assisted Fe50Mn30Co10Cr10 duplex high-entropy alloys via flash annealing and deep cryogenic treatments10.1016/j.actamat.2024.119779 ↗
9. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
10. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
11. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
12. A novel (CoFeNi)82Ti5Al5V8 medium entropy alloy showing an ultra yield strength and a good ductility by L12 nanoparticles strengthening and dislocation strengthening10.1016/j.msea.2024.146138 ↗
13. Design and high-strength origin of novel (CoFeNi)80Ti5V15 medium entropy alloy with “fcc + L12” structure10.1016/j.jmst.2023.01.002 ↗
14. Microstructure and mechanical property of novel L12 nanoparticles-strengthened CoFeNi-based medium entropy alloys10.1016/j.msea.2022.142917 ↗
15. L12 nanoparticles-strengthened Co2Ni2Cr medium entropy alloy showing an outstanding tensile property10.1016/j.matchar.2024.113744 ↗
16. A novel single-crystal L12-strengthened Co-rich high-entropy alloy with excellent high-temperature strength and antioxidant property10.1016/j.jmrt.2023.01.182 ↗
17. A novel L12-strengthened multicomponent Co-rich high-entropy alloy with both high γ′-solvus temperature and superior high-temperature strength10.1016/j.scriptamat.2021.113826 ↗
18. The evolution of dual-phase core–shell structure and mechanical properties induced by Co addition in as-cast high-entropy intermetallic10.1016/j.matdes.2023.112120 ↗
19. Physical Metallurgy of the Nickel-Based Superalloys
20. Elemental partitions and deformation mechanisms of L1-type multicomponent intermetallics210.1016/j.actamat.2021.117238 ↗
21. The evolution of intermetallic compounds in high-entropy alloys: from the secondary phase to the main phase10.3390/met11122054 ↗
22. Resent development in high-entropy alloys and other high-entropy materials
23. Ultrahigh intermediate-temperature strength and good tensile plasticity in chemically complex intermetallic alloys via lamellar architectures10.1016/j.actamat.2023.119459 ↗
24. Off-stoichiometry-guided design of high-strength chemically complex intermetallic-based alloys with outstanding ductility10.1016/j.jmst.2023.02.033 ↗
25. Novel Co-Ti-V-base superalloys reinforced by L12-ordered γ′ phase10.1016/j.intermet.2017.09.015 ↗
26. Effects of Mo on the mechanical behavior of γ/γ′-strengthened Co-Ti-based alloys10.1016/j.actamat.2020.07.037 ↗
27. T.M. Pollock, High-temperature strength and deformation of γ/γ′ two-phase Co–Al–W-base alloys10.1016/j.actamat.2007.11.014 ↗
28. A novel type of Co–Ti–Cr-base γ/γ′ superalloys with low mass density10.1016/j.actamat.2017.06.024 ↗
29. The high temperature tensile and creep behaviors of high entropy superalloy10.1038/s41598-017-13026-7 ↗
30. Alloying element additions to NiAl: site preferences and effects on elastic properties from first-principles calculations310.1016/j.commatsci.2011.09.016 ↗
31. CALPHAD-aided design of high entropy alloy to achieve high strength via precipitate strengthening10.1007/s40843-019-1170-7 ↗
32. Evolution of Ni-based superalloys for single crystal gas turbine blade applications10.1016/S1270-9638(99)00108-X ↗
33. A Co-rich chemically complex intermetallic alloy with extraordinary strength-ductility synergy10.1016/j.scriptamat.2023.115371 ↗
34. Site preference of ternary additions in Ni3Al, MRS online proceedings library
35. The effect of Cr implantation on the isothermal-oxidation behavior of a Ni3Al PM Alloy10.1023/A:1018822723455 ↗
36. Effect of boron on grain-boundaries in Ni 3Al10.1016/0001-6160(85)90139-7 ↗
37. Improvement in room temperature ductility of the L12 Type intermetallic compound Ni3Al by Boron Addition10.2320/jinstmet1952.43.12_1190 ↗
38. Effect of heat treatments on the microstructural evolution of a single crystal high-entropy superalloy10.3390/met10121600 ↗
39. The activation energy for {111} cross-slip in L12 ordered alloys10.1080/01418619708207204 ↗
40. Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy, AlCoCrFeNi2.110.1016/j.jmst.2020.04.073 ↗
41. Shearing mechanisms of stacking fault and anti-phase-boundary forming dislocation pairs in the γ′ phase in Ni-based single crystal superalloy10.1016/j.jallcom.2017.07.020 ↗
42. Dislocation emission from cracks in crystals or along crystal interfaces10.1016/0036-9748(86)90377-7 ↗
43. A model for the fracture-behavior of polycrystalline Ni3al10.1016/0036-9748(86)90272-3 ↗
44. Ultrahigh-strength and ductile superlattice alloys with nanoscale disordered interfaces10.1126/science.abb6830 ↗
45. Designing nanoparticles-strengthened high-entropy alloys with simultaneously enhanced strength-ductility synergy at both room and elevated temperatures10.1016/j.actamat.2022.118216 ↗
46. Enhancing strength-ductility synergy in a casting non-equiatomic NiCoCr-based high-entropy alloy by Al and Ti combination addition10.1016/j.scriptamat.2021.113898 ↗
47. Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures10.1038/s41467-020-20109-z ↗
48. L12-Strengthened Co-rich alloys for high-temperature structural applications: a critical review10.1002/adem.202100453 ↗
49. High-temperature coni-based superalloys strengthened by γ′-(Ni,Co)3(Cr,Al,Ti,X): the effect of refractory elements10.1007/s11661-022-06795-y ↗
50. On the prediction of the yield stress of unimodal and multimodal γ′ Nickel-base superalloys10.1016/j.actamat.2015.07.048 ↗
51. On the relationship between uniaxial yield strength and resolved shear stress in polycrystalline materials10.1016/S0022-3115(00)00378-0 ↗
52. Modelling of the influence of alloy composition on flow stress in high-strength nickel-based superalloys10.1016/j.actamat.2014.04.075 ↗
53. Strengthening mechanisms in polycrystalline multimodal nickel-base superalloys10.1007/s11661-009-9858-5 ↗
54. Effect of alloying elements on the γ’ antiphase boundary energy in Ni-base superalloys10.1016/j.intermet.2019.106670 ↗
55. Effect of composition on antiphase boundary energy in Ni3Al based alloys: Ab initio calculations10.1103/PhysRevB.93.224106 ↗
56. Elements distribution and deformation features of a 4.5% Re nickel-based single crystal superalloy during creep at high temperature10.1016/j.matchar.2018.05.017 ↗
57. High-entropy nanoparticles: synthesis-structure-property relationships and data-driven discovery10.1126/science.abn3103 ↗
58. Diffusion in ordered alloys and intermetallic compounds10.1016/0956-7151(93)90095-A ↗
59. Chemically complex intermetallic alloys: a new frontier for innovative structural materials10.1016/j.mattod.2021.12.004 ↗
60. Computationally aided, entropy-driven synthesis of highly efficient and durable multi-elemental alloy catalysts10.1126/sciadv.aaz0510 ↗
61. High-temperature tensile strength of Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy (High-Entropy Alloy)10.1007/s11837-015-1484-7 ↗
62. Intermediate temperature embrittlement in a precipitation-hardened high-entropy alloy: the role of heterogeneous strain distribution and environmentally assisted intergranular damage
63. Microstructure and tensile behavior of Al8Co17Cr17Cu8Fe17Ni33 (at%) high-entropy alloy10.1007/s11837-013-0756-3 ↗
64. New Ll2 ordered alloys having the positive temperature dependence of strength10.2320/matertrans1960.21.237 ↗
65. Tensile properties of an AlCrCuNiFeCo high-entropy alloy in as-cast and wrought conditions10.1016/j.msea.2011.11.045 ↗
66. High-strength Co–Al–V-base superalloys strengthened by γ′-Co3(Al,V) with high solvus temperature10.1016/j.actamat.2019.03.013 ↗
67. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗