journal article·2025-01

Effect of Er2O3 and Y2O3 on microstructure and mechanical properties of Ti2AlNb alloy

Guohao Shi, Yuyong Chen, Zhiming Du, Yu Zhang

Publisher page

Abstract

Rare earth oxides can significantly refine the microstructure of the cast alloys and improve their mechanical properties. In this study, Er 2O 3 and Y 2O 3 particles were chosen to add into the Ti 2AlNb-based alloy with vacuum non-consumable arc melting method. For the Er 2O 3 particles, it has obvious dissolution and re-precipitation characteristics during melting. While for the Y 2O 3 particles, they are more stable, and aggregated and grew up during melting. These two kinds of Er 2O 3 or Y 2O 3 both have obvious refinement effects on the B2 grains due to their heterogeneous nucleation. Specially, adding Er 2O 3 particles can promote the decomposition of the B2 and α 2 phases and the increases of the O-phase content. But adding the Y 2O 3 particles can inhibits the B2 decomposition and just only promotes the α 2 decomposition into the O-phase. Additionally, the TAC-Er 2O 3 ingot shows the worst mechanical properties at room-temperature due to its large size and grain boundary segregation of the Er 2O 3 reinforcements. Conversely, the TAC-Y 2O 3 alloy exhibits excellent strength and ductility whatever at room- and high- temperatures owing to its fine grain strengthening and effective strengthening of the second precipitated Y 2O 3 phases.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. A new ordered orthorhombic phase in a Ti3Al−Nb alloy10.1016/0001-6160(88)90141-1 ↗
2. Effect of prior α2 phase on precipitation kinetics of O-phase in advanced Ti2AlNb alloy10.1016/j.actamat.2023.118930 ↗
3. A review-additive manufacturing of intermetallic alloys based on orthorhombic titanium aluminide Ti2AlNb10.3390/ma16030991 ↗
4. Selective laser melting of Ti–22Al–25Nb intermetallic: significant effects of hatch distance on microstructural features and mechanical properties10.1016/j.jmatprotec.2019.116398 ↗
5. Research and prospect of Ti2AlNb alloy[J]
6. Microstructure evolution and mechanical properties of a high-strength Ti2AlNb alloy processed by large-strain two-pass hot extrusion10.1016/j.jallcom.2022.166715 ↗
7. Phase transformation and microstructure control of Ti2AlNb-based alloys: a review10.1016/j.jmst.2020.11.022 ↗
8. Phase stability and microstructural evolution of Ti2AlNb alloys-a review10.1016/j.matpr.2020.10.925 ↗
9. Mechanical Properties of the Ti2AlNb Intermetallic: a review10.1007/s12666-021-02307-5 ↗
10. Physical-chemistry effect of rare earth elements on metallic materials10.1007/s40195-012-0502-9 ↗
11. Effect of Yttrium on the Microstructure of Ti-23Al-25Nb Alloy
12. Grain refining of Er added to Ti–22Al–25Nb alloy and morphology of erbium precipitates10.1007/s12598-013-0006-4 ↗
13. Effects of nano-Y2O3 addition on the microstructure evolution and tensile properties of a near-α titanium alloy10.1016/j.msea.2019.05.107 ↗
14. Study of the structure and properties of heat-resistant alloys based on titanium aluminides with gadolinium microadditives10.1134/S2075113317040116 ↗
15. Effect of nano Y2O3 addition on microstructure and room temperature tensile properties of Ti–48Al–2Cr–2Nb alloy10.1016/j.vacuum.2019.06.026 ↗
16. Influence of nano-Y2O3 addition on microstructure and tensile properties of high-Al TiAl alloys10.1016/j.msea.2020.139803 ↗
17. High temperature tensile properties and fracture behavior of Y2O3-bearing Ti-48Al-2Cr-2Nb alloy10.1016/j.intermet.2020.106933 ↗
18. Enhanced creep properties of Y2O3-bearing Ti-48Al-2Cr-2Nb alloys10.1016/j.msea.2021.140952 ↗
19. Effect of nano-Y2O3 addition on the creep behavior of an as-cast near-α titanium alloy10.1016/j.matchar.2021.111249 ↗
20. Significant improvement in high-temperature mechanical properties of Y2O3-reinforced TiAl alloys by heat treatment10.1016/j.msea.2024.146139 ↗
21. Monoclinic B-phase erbium sesquioxide (Er2O3) thin films by filtered cathodic arc deposition10.1016/j.scriptamat.2009.06.031 ↗
22. Pressure-induced cubic to monoclinic phase transformation in erbium sesquioxide Er2O310.1021/ic070154g ↗
23. Atmospheric pressure synthesis of heavy rare earth sesquioxides nanoparticles of the uncommon monoclinic phase10.1111/j.1551-2916.2007.01961.x ↗
24. On the evaluation of stability of rare earth oxides as face coats for investment casting of titanium10.1007/BF02667869 ↗
25. Effect of Er on microstructure and properties of Ti-16Al-27Nb alloy
26. Effect of nano-Al2O3 addition on microstructure and mechanical properties of Ti2AlNb-based composites prepared by powder metallurgy10.1016/j.jallcom.2023.172268 ↗
27. Reinforcement of TiAl alloy by evenly distributed micron-/nano-Y2O3 particles10.1016/j.matchar.2023.113316 ↗
28. Effect of cooling rate on phase transformation in Ti2AlNb alloy10.1016/j.jallcom.2021.162364 ↗
29. The effect of lamellar morphology on tensile and high-cycle fatigue behavior of orthorhombic Ti-22Al-27Nb alloy10.1007/s11661-004-0164-y ↗
30. Designed bimodal size lamellar O microstructures in Ti2AlNb based alloy: microstructural evolution, tensile and creep properties10.1016/j.msea.2014.09.035 ↗
31. Improvement of room temperature ductility for Mo and Fe modified Ti2AlNb alloy10.1016/j.msea.2010.09.003 ↗
32. Variant selection of orthorhombic phase precipitation and its effect on colony side plates formation in Ti–22Al–25Nb alloy10.1016/j.jmrt.2023.06.254 ↗
33. Investigation of the phase transformations in Ti–22Al–25Nb alloy10.1016/j.matchar.2016.02.011 ↗
34. Al-Nb-Ti (Aluminum-Niobium-Titanium)10.1007/s11669-005-0089-1 ↗
35. Microstructure and mechanical properties of orthorhombic alloys in the Ti-Al-Nb system10.1016/S0966-9795(98)00044-2 ↗
36. Formation mechanism of an α2 phase-rich layer on the surface of Ti-22Al-25Nb alloy10.1016/j.matchar.2018.08.030 ↗
37. Intermetallic Alloys Based on Orthorhombic Titanium Aluminide10.1002/1527-2648(200111)3:11<851::AID-ADEM851>3.0.CO;2-G ↗
38. Dai · 2009
39. The α2-to-O transformation in Ti-Al-Nb alloys10.1080/01418619508236234 ↗
40. The effect of aging on microstructure of the O-phase in Ti-24Al-14Nb-3V-0.5 Mo alloy10.1016/S0167-577X(00)00357-8 ↗
41. Promoted phase transformation of α2 to O in Ti2AlNb alloy with improved mechanical performance via laser shock peening10.1016/j.matdes.2023.111900 ↗
42. Part III. The tensile behavior of Ti-Al-Nb O+Bcc orthorhombic alloys10.1007/s11661-001-0010-4 ↗
43. Comparison of the deformation microstructures at room temperature in O and B2 phases of a Ti2AlNb alloy
44. Tensile behavior of Ti-22Al-24Nb-0.5Mo in the range 25–650 ℃10.1016/j.msea.2016.10.047 ↗
45. Investigation of the O phase in the Ti–22Al–25Nb alloy during deformation at elevated temperatures: Plastic deformation mechanism and effect on B2 grain boundary embrittlement10.1016/j.actamat.2022.118467 ↗