journal article·2025-01

Thermoelectric properties of GeTe-based composites prepared by spark plasma sintering containing Bi/Sb additive

Can Zhu, Jian Wang, Lin Cheng, Lijun Zhai, Junsong He, Yan Zhang, Hongxia Liu, Zhigang Sun

Publisher page

Abstract

Spark plasma sintering (SPS) is often used to prepare bulk thermoelectric (TE) materials, and the application of additives during the process may have a unique effect on constructing multiphase structures. The additives with low melting points can be often extruded or react with the matrix during the SPS process, leaving dense dislocations or multiphase structures to optimize the TE performance. In this paper, high-performance GeTe-based composites were prepared by SPS containing Bi or Sb additive. During the SPS process (sintering temperature ∼773 K), the Bi (melting point ∼544 K) or Sb (∼904 K) additive have the liquid-solid/solid-solid reaction with the GeTe matrix, respectively. The chemical reactions lead to the composite structures of the matrix and pseudo-binary alloy (GeTe) x(Bi 2Te 3) or (GeTe) y(Sb 2Te 3) with 7 ≤ ( x, y) ≤ 9, resulting in a significant increase in the Seebeck coefficient by the energy filtering effect and the reduction of thermal conductivity by enhancing the phonons scattering. The influence of the Sb additive is better than that of Bi, therefore, the sample with 1 wt% Sb has a ZT max value of 1.49 at 685 K, ∼157 % higher than that of the matrix (0.58). This study shows that SPS with appropriate additives is an effective method to prepare high-performance GeTe-based TE composites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Phase-change materials and chalcogenides · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Routes for high-performance thermoelectric materials10.1016/j.mattod.2018.03.039 ↗
2. Electronic structure modulation strategies in high-performance thermoelectrics10.1063/5.0002129 ↗
3. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
4. Behnia · 2015
5. Effects of Co-doping and microstructure on charge carrier energy filtering in thermoelectric titanium-doped zinc aluminum oxide10.1021/acsami.1c20300 ↗
6. Enhanced thermoelectric performance of N-type polycrystalline SnSe via NdCl3 doping10.1016/j.jallcom.2022.164900 ↗
7. Versatile vanadium doping induces high thermoelectric performance in GeTe via band alignment and structural modulation10.1002/aenm.202100544 ↗
8. Enhancing near-room-temperature GeTe thermoelectrics through in/Pb Co-doping10.1021/acsami.1c11599 ↗
9. Convergence of conduction bands as a means of enhancing thermoelectric performance of N-type Mg2Si1−xSnx solid solutions10.1103/PhysRevLett.108.166601 ↗
10. Band structure and microstructure modulations enable high quality factor to elevate thermoelectric performance in Ge0.9Sb0.1Te-x%FeTe2
11. Intrinsic vacancy suppression and band convergence to enhance thermoelectric performance of (Ge, Bi, Sb)Te crystals10.1016/j.cej.2021.132275 ↗
12. Effects of magnetic Fe doping on the thermoelectric properties of TiNiSn nanomaterials prepared via melt spinning method10.1016/j.jallcom.2023.172808 ↗
13. Extraordinary thermoelectric performance realized in n-type PbTe through multiphase nanostructure engineering10.1002/adma.201703148 ↗
14. Magnetism modulation for cryogenic thermoelectric enhancements in Fe3O4 nanoparticle-incorporated Bi0.85Sb0.15 nanocomposites10.1021/acsami.2c20778 ↗
15. High ZT in P-type thermoelectric (Bi,Sb)2Te3 with built-in nanopores10.1039/D2EE00119E ↗
16. Cellular structured Cu2Sn0.8Co0.2S3 with enhanced thermoelectric performance realized by liquid-phase sintering10.1039/D2TA06877J ↗
17. Thermoelectric properties of (GeTe)1−x[(Ag2Te)0.4(Sb2Te3)0.6]x alloys10.1007/s12598-021-01847-5 ↗
18. Low thermal conductivity in GeTe-based thermoelectric materials with additional activated carbon10.1063/5.0039883 ↗
19. Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics10.1126/science.aaa4166 ↗
20. Thermal conductivity in Bi0.5Sb1.5Te3 and the role of dense dislocation arrays at grain boundaries10.1126/sciadv.aar5606 ↗
21. High-performance thermoelectrics from cellular nanostructured Sb2Si2Te610.1016/j.joule.2019.10.010 ↗
22. High-performance GeTe-based thermoelectrics: from materials to devices10.1002/aenm.202000367 ↗
23. GeTe: a simple compound blessed with a plethora of properties10.1039/C7CE01040K ↗
24. Realizing zT of 2.3 in Ge1−x−ySbxInyTe via reducing the phase-transition temperature and introducing resonant energy doping10.1002/adma.201705942 ↗
25. Thermoelectric GeTe with diverse degrees of freedom having secured superhigh performance10.1002/adma.201807071 ↗
26. Low-symmetry rhombohedral GeTe thermoelectrics10.1016/j.joule.2018.02.016 ↗
27. Electronic origin of the high thermoelectric performance of GeTe among the P-type group IV monotellurides10.1038/am.2017.8 ↗
28. High figure-of-merit and power generation in high-entropy GeTe-based thermoelectrics10.1126/science.abq5815 ↗
29. Realizing high thermoelectric performance in GeTe by defect engineering on cation sites10.1039/D2TC01456D ↗
30. Lattice dynamics and specific heat of α-GeTe: theoretical and experimental study10.1103/PhysRevB.79.075204 ↗
31. Stacking fault-induced minimized lattice thermal conductivity in the high-performance GeTe-based thermoelectric materials upon Bi2Te3 alloying10.1021/acsami.9b04984 ↗
32. Realization of both N- and P-type GeTe thermoelectrics: electronic structure modulation by AgBiSe2 alloying10.1021/jacs.9b11405 ↗
33. Bi-Zn codoping in GeTe synergistically enhances band convergence and phonon scattering for high thermoelectric performance10.1039/D0TA08700A ↗
34. Synergistically improving thermoelectric and mechanical properties of Ge0.94Bi0.06Te through dispersing nano-SiC
35. Effect of Bi doping on thermoelectric properties of Ge0.90−XPb0.10BixTe compounds10.1016/j.mssp.2020.104955 ↗
36. Arrays of planar vacancies in superior thermoelectric Ge1−x−yCdxBiyTe with band convergence10.1002/aenm.201801837 ↗
37. Realizing high figure of merit plateau in Ge1−xBixTe via enhanced Bi solution and Ge precipitation10.1016/j.jallcom.2019.07.120 ↗
38. Atomic Radii in Crystals10.1063/1.1725697 ↗
39. High thermoelectric performance and enhanced mechanical stability of P-type Ge1–xSbxTe10.1021/acs.chemmater.5b03434 ↗
40. Low thermal conductivity and high thermoelectric performance in Sb and Bi codoped GeTe: complementary effect of band convergence and nanostructuring10.1021/acs.chemmater.7b04023 ↗
41. High power factor and enhanced thermoelectric performance in Sc and Bi codoped GeTe: insights into the hidden role of rhombohedral distortion degree10.1002/aenm.202002588 ↗
42. Boosting the thermoelectric performance of GeTe by manipulating the phase transition temperature via Sb doping10.1039/D1TC01714D ↗
43. Phase diagram of the ternary system Ge-Sb-Te: II. The subternary Ge-GeTe-Sb2Te3-Sb10.1016/0040-6031(86)85051-1 ↗
44. GeTe)x-(Sb2Te3)1–x phase-change thin films as potential thermoelectric materials10.1002/pssa.201228397 ↗
45. Phase equilibria of the GeTe-Bi2Te3 quasi-binary system in the range 0–50 mol% Bi2Te310.1080/01411594.2021.1937625 ↗
46. A refined phase diagram of the GeTe-Bi2Te3 system
47. Enhanced thermoelectric performance of GeTe-rich germanium antimony tellurides through the control of composition and structure10.1039/C5CE00228A ↗
48. Structural characteristics of GeTe-rich GeTe–Sb2Te3 pseudobinary metastable crystals10.1063/1.2901187 ↗
49. High thermoelectric figure of merit values of germanium antimony tellurides with kinetically stable cobalt germanide precipitates10.1021/jacs.5b07856 ↗
50. Understanding the superior thermoelectric performance of Sb precipitated Ge17Sb2Te2010.1039/C6TC03789E ↗
51. Realizing improved thermoelectric performance in BiI3-doped Sb2Te3(GeTe)17 via introducing dual vacancy defects10.1021/acs.chemmater.0c00113 ↗
52. Vacancy-based defect regulation for high thermoelectric performance in Ge9Sb2Te12-x compounds10.1021/acsami.0c02155 ↗
53. In situ temperature-dependent transmission electron microscopy studies of pseudobinary mGeTe·Bi2Te3 (m = 3–8) nanowires and first-principles calculations10.1021/acs.nanolett.5b00755 ↗
54. High thermoelectric potential of Bi2Te3 alloyed GeTe-rich phases10.1063/1.4958973 ↗
55. Positive effect of Ge vacancies on facilitating band convergence and suppressing bipolar transport in GeTe-based alloys for high thermoelectric performance10.1002/adfm.201910059 ↗
56. Estimation of the band gap of a series of new thermoelectric materials10.1134/S106378261707020X ↗
57. Superparamagnetic enhancement of thermoelectric performance10.1038/nature23667 ↗
58. Effects of magnetism and size of nano-oxide inclusions on the thermoelectric properties of Ge0.96Bi0.06Te10.1039/D2TA08403A ↗
59. Critical analysis of single band modeling of thermoelectric materials10.1021/acsaem.9b02015 ↗
60. Stacking faults modulation for scattering optimization in GeTe-based thermoelectric materials10.1016/j.nanoen.2019.104347 ↗
61. Chen · 2020
62. Enhanced thermoelectric performance of GeTe-based composites incorporated with Fe nanoparticles10.1021/acsami.2c10608 ↗
63. Excellent thermoelectric performance realized in P-type pseudolayered Sb2Te3(GeTe)12 via rhenium Doping10.1021/acsaem.9b01915 ↗
64. Reduction of thermal conductivity through nanostructuring enhances the thermoelectric figure of merit in Ge1−xBixTe10.1039/C5QI00230C ↗
65. Realization of non-equilibrium process for high thermoelectric performance Sb-doped GeTe10.1016/j.scib.2018.04.012 ↗
66. Enhancing thermoelectric performance by fermi level tuning and thermal conductivity degradation in (Ge1−Xbix)Te crystals10.1038/s41598-019-45071-9 ↗
67. Charge-transport model for conducting polymers10.1038/nmat4784 ↗