Improving strength-conductivity synergy of Al-Cu-(Sn/Er) alloy with nanoscale substructure
Source abstract
Abstract
As a conductive material for power transmission, Al-Cu alloy is widely used in power engineering, microelectronics and other fields. In view of the contradiction between the conductivity and strength of aluminum alloy, Sn and Er elements were selected to micro-alloy Al-Cu alloy. Al-Cu, Al-Cu-Sn and Al-Cu-Sn-Er alloys were prepared by near-liquidus casting. After solution treatment, it was subjected to three-stage alternating process of rolling and aging. The effects of micro-alloying and alternating process on the microstructure and properties of Al-Cu alloy were studied. The results show that the precipitated phase Al 2Cu of Al-1.12 Cu alloy is rod-shaped after the first-stage process, and the average size is about 278±87 nm. The precipitated phases in the Al-Cu-Sn alloy are Al 2Cu (average size of about 206±79 nm) and nano-sized β-Sn particles. The fine β-Sn nanoparticles in the Al-Cu-Sn-Er alloy heterogeneously nucleated on Al 8Cu 4Er (average size of about 167±45 nm), making Al 8Cu 4Er grow into particles. After secondary processing, stacking faults (SFs) appeared in the substructures of the three alloys, and the precipitated phases were further refined. The size of most precipitated phases in Al-1.13Cu-0.12Sn and Al-1.01Cu-0.15Sn-0.22Er alloys is reduced to nanometer level. After the three-stage process, some of the Al 2Cu precipitates in the Al-Cu alloy are also refined to the nanometer level, and the precipitates in the other two alloys are all refined to the nanometer level. Nanotwins also appear in Al-1.01Cu-0.15Sn-0.22Er alloy. The tensile strength of Al-1.13Cu-0.12Sn and Al-1.01Cu-0.15Sn-0.22Er alloys after three-stage alternating process is 303 MPa and 327 MPa, respectively. The elongations are 21.6 % and 23.3 %, respectively. The relative conductivity was 61.7 %IACS and 59.8 %IACS, respectively. The synergistic effect of microalloying of Sn and Er elements and three-stage alternating processing technology not only reduces the size of precipitates and twins in the alloy to the nanometer level, but also adjusts the distribution of dislocation tangles and stacking faults (SFs), improves the substructure configuration, and improves the mechanical and electrical properties of conductive aluminum alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Alloy design strategies to increase strength and its trade-offs together10.1016/j.pmatsci.2020.100720 ↗
2. Synchronous improvement of electrical and mechanical performance of A356 alloy reinforced by boron coupling nano-AlNp10.1016/j.jallcom.2019.152217 ↗
3. Comparison of properties and microstructures between Al-Cu-Mg-Ag alloy and ZL205A alloy
4. Three principles for preparing Al wire with high strength and high electrical conductivity10.1016/j.jmst.2018.11.013 ↗
5. Sn-induced phase transformation mechanism from θ′ to θ in Al-4Cu alloy and its influence on high temperature strength10.1016/S1003-6326(23)66281-8 ↗
6. The magic thicknesses of θ′ precipitates in Sn-microalloyed Al–Cu10.1016/j.actamat.2011.10.015 ↗
7. Fabrication of hypoeutectic Al-4Si alloy with high electrical conductivity, high plasticity and medium strength by the dual treatment of Al matrix and eutectic Si microstructure10.1016/j.jallcom.2021.161117 ↗
8. Mechanisms for Ce-induced remarkable improvement of conductivity in Al alloys10.1557/jmr.2016.477 ↗
9. Co-doping of La/Ce and La/Er induced precipitation strengthening for designing high strength Al-Mg-Si electrical conductive alloys
10. Mechanical and electrical properties of an ultrafine grained Al–8.5wt%RE(RE=5.4wt%Ce, 3.1wt%La)alloy processed by severe plastic deformation10.1016/j.matdes.2015.10.163 ↗
11. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
12. High strength and high electrical conductivity in bulk nanograined Cu embedded with nanoscale twins10.1063/1.2816126 ↗
13. The possibilities to lower the stacking fault energies of aluminum materials investigated by first-principles energy calculations10.1016/j.commatsci.2015.06.015 ↗
14. Comparative analysis of structure and properties of quasibinary Al-6.5Cu-2.3Y and Al-6Cu-4.05Er alloys10.1134/S0031918X20030023 ↗
15. The growth mechanisms of θ′ precipitate phase in an Al-Cu alloy during aging treatment10.1016/j.jmst.2020.05.046 ↗
16. Processability, microstructure, and mechanical property of Al-Si-Mg-Zr-Cu alloy fabricated by selective laser melting
17. Effect of Sn addition in preprecipitation stage in Al-Cu alloys:a correlative transmission electron microscopy and atom probe tomography study10.1007/s11661-012-1111-y ↗
18. Effects of the addition of Ca and Sb on the microstructure and mechanical properties of AZ91 magnesium
19. Stacking faults in a mechanically strong Al(Mg)-Al3Mg2 composite10.1016/j.compositesb.2022.110211 ↗
20. Hirth · 1982 · P. 839
21. Effect of different cold deformation and aging treatments on microstructure and properties of CuCrZr alloy
22. Working hardening behavior of BAl7-7-2-2 copper alloy under cold compression deformation
23. Enhanced mechanical performance of grain boundary precipitation-hardened high-entropy alloys via a phase transformation at grain boundaries10.1016/j.jmst.2021.01.061 ↗
24. Microstructure and properties of as-cast Cu-Cr-Zr alloys with lanthanum addition10.1016/j.jre.2017.11.006 ↗
25. Effects of pre-deformation on precipitation behaviors and properties in Cu-Ni-Si-Cr alloy10.1016/j.msea.2018.11.045 ↗
26. Fabrication of hypoeutectic Al-4Si alloy with high electrical conductivity, high plasticity and medium strength by the dual treatment of Al matrix and eutectic Si microstructure10.1016/j.jallcom.2021.161117 ↗
27. Co-doping of La/Ce and La/Er induced precipitation strengthening for designing high strength Al-Mg-Si electrical conductive alloys
28. Effect of Ni addition on the microstructure and mechanical properties of 6101 aluminum alloy with high electrical conductivity10.1007/s11665-022-06965-4 ↗
29. Hot tearing and mechanical properties of high electrical and thermal conductivity Al-Fe-Mg-Si-Ni Alloys10.1080/13640461.2023.2173855 ↗
30. Mechanical and conductive performance of aged 6xxx aluminum alloy during rotary swaging10.3390/cryst12040530 ↗
31. Precipitation hardening of the electrical conductor aluminum alloy 620110.3390/met13061111 ↗
32. Energy-efficient method for developing in-situ Al-Cu metal matrix composites using microwave sintering and friction stir processing10.1088/2053-1591/ac7638 ↗
33. A trade-off between mechanical strength and electrical conductivity of Al–Zn–Mg–Cu alloy via Ag alloying and retrogression re-aging heat treatment10.1016/j.msea.2023.145230 ↗
34. Effect of annealing on the interface and properties of Pd/Al composite wires10.3390/ma16041545 ↗
35. A high strength Al-Zr alloy with good electrical conductivity by combining gas-assisted continuous casting and extrusion with subsequent thermomechanical treatment
36. Alloying elements effects on electrical conductivity and mechanical properties of newly fabricated Al based alloys produced by conventional casting process10.3390/ma14143971 ↗
37. Enhancing strength and electrical conductivity of pure aluminum by microalloying with telluride10.1088/2053-1591/ac1cac ↗