Roles of fast-ion conductor NaAlO2 modifying P2-Na0.67Ni0.3Mn0.6Co0.1O2 cathode material for sodium-ion batteries
Source abstract
Abstract
P2-type layered oxides are promising candidates for sodium-ion batteries. However, structural instability and sluggish Na⁺ diffusion kinetics hinder their further commercialization. In this study, NaAlO 2, which possesses a similar α-NaFeO 2 layer structure, is coated onto the surface of P2-Na 0.67Ni 0.3Mn 0.6Co 0.1O 2 (NNMC) to enhance its electrochemical performance as a novel cathode for sodium-ion batteries. A variety of experimental results and characterizations reveal that the thin NaAlO 2 coating layer significantly reduces side reactions and facilitates the diffusion of Na⁺ at the interface between the cathode and the electrolyte. Moreover, the introduction of partial Al ions into the transition-metal layers enlarge the interlayer spacing, and decrease the content of Mn 3+. As a result, the NNMC cathode material, modified with 3 wt% NaAlO 2, demonstrated remarkable electrochemical performance. The initial specific discharge capacity was recorded at 137.7 mA h g −1 at 0.2 C, and an impressive discharge capacity of 38.2 mA h g −1 was attained at 20 C. Following 100 cycles at a rate of 0.5 C, the capacity retention rate was determined to be 99.6 %.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Sodium-ion batteries paving the way for grid energy storage10.1002/aenm.202001274 ↗
2. Challenges and prospects of sodium-ion and potassium-ion batteries for mass production10.1002/aenm.202302321 ↗
3. Correlation between the composition, structural parameters and magnetic properties of spinel-based functional nanocomposites10.1016/j.nanoso.2023.100941 ↗
4. Recent advances in Mn-rich layered materials for sodium-ion batteries10.1002/adfm.202212607 ↗
5. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
6. Alharbi · Ceram. Int. · 2024 · 50 · 2417710.1016/j.ceramint.2024.04.149 ↗
7. Changes in the structure, magnetization, and resistivity of BaFe12–xTixO1910.1021/acsaelm.0c01081 ↗
8. Oxide cathodes: functions, instabilities, self healing, and degradation mitigations10.1021/acs.chemrev.2c00251 ↗
9. Unlocking high-rate O3 layered oxide cathode for Na-ion batteries via ion migration path modulation10.1016/j.jechem.2023.04.029 ↗
10. Recent progress in the emerging modification strategies for layered oxide cathodes toward practicable sodium ion batteries
11. Structural and electrodynamic characteristics of the spinel-based composite system
12. Trace Y doping regulated bulk/interfacial reactions of P2-layered oxides for ultrahigh-rate sodium-ion batteries
13. Structure, magnetic, and electrodynamic properties of SrInxFe12-xO4/Ni0.5Zn0.5Fe2O4 composites at low temperature10.1111/jace.19798 ↗
14. Realizing high capacity and zero strain in layered oxide cathodes via lithium dual-site substitution for sodium-ion batteries10.1021/jacs.3c00117 ↗
15. Tuning sodium occupancy sites in P2-layered cathode material for enhancing electrochemical performance10.1002/aenm.202003455 ↗
16. Functional surface modification of P2-type layered Mn-based oxide cathode by thin layer of NASICON for sodium-ion batteries10.1016/j.electacta.2023.141915 ↗
17. A durable P2-type layered oxide cathode with superior low-temperature performance for sodium-ion batteries10.1007/s40843-021-1742-8 ↗
18. Boosting the ultrastable high-na-content P2-type layered cathode materials with zero-strain cation storage via a lithium dual-site substitution approach10.1021/acsnano.3c07625 ↗
19. A universal strategy based on bridging microstructure engineering and local electronic structure manipulation for high-performance sodium layered oxide cathodes10.1021/acsnano.3c03819 ↗
20. Cu-doped layered P2-type Na0.67Ni0.33-xCuxMn0.67O2 cathode electrode material with enhanced electrochemical performance for sodium-ion batteries10.1016/j.cej.2020.126578 ↗
21. Entropy and crystal-facet modulation of P2-type layered cathodes for long-lasting sodium-based batteries10.1038/s41467-022-30113-0 ↗
22. Manipulating local chemistry and coherent structures for high-rate and long-life sodium-ion battery cathodes10.1021/acsnano.4c02017 ↗
23. The effect of heat treatment on the microstructure and mechanical properties of 2D nanostructured Au/NiFe system10.3390/nano10061077 ↗
24. Interlocking biphasic chemistry for high-voltage P2/O3 sodium layered oxide cathode10.1016/j.ensm.2022.06.012 ↗
25. CuO-Coated and Cu2+-doped Co-modified P2-type Na2/3[Ni1/3Mn2/3]O2 for sodium-ion batteries10.1039/C8CP06248J ↗
26. Effect of Ga content on magnetic properties of BaFe12−xGaxO19/epoxy composites.10.1007/s10853-020-04661-z ↗
27. Capacity degradation mechanism and cycling stability enhancement of AlF3-coated nanorod gradient Na[Ni0.65Co0.08Mn0.27]O2 cathode for sodium-ion batteries10.1021/acsnano.8b08266 ↗
28. Surface to bulk synergetic modulation of nickel-rich LiNi0.83Co0.06Mn0.11O2 via a three-in-one approach for long-cycle lithium-ion batteries10.1002/aenm.202401123 ↗
29. NASICON-type NaTi2(PO4)3 surface modified O3-Type NaNi0.3Fe0.2Mn0.5O2 for high-performance cathode material for sodium-ion batteries10.1021/acsami.3c09876 ↗
30. AlPO4-coated P2-type hexagonal Na0.7MnO2.05 as high stability cathode for sodium ion battery
31. Construction nasicon-type NaTi2(PO4)3 nanoshell on the surface of P2-type Na0.67Co0.2Mn0.8O2 cathode for superior room/low-temperature sodium storage10.1016/j.cej.2020.126181 ↗
32. Semiconductor material ZnO-coated P2-TypeNa2/3Ni1/3Mn2/3O2 cathode materials for sodium-ion batteries with superior electrochemical performance10.1021/acs.jpcc.9b08220 ↗
33. Interfacial effects in lithium and sodium batteries10.1002/aenm.202001455 ↗
34. Sodium-ion batteries: building effective layered cathode materials with long-term cycling by modifying the surface via sodium phosphate10.1002/adfm.201705968 ↗
35. Stable electrochemical properties of magnesium-doped co-free layered P2-type Na0.67Ni0.33Mn0.67O2 cathode material for sodium ion batteries10.1021/acssuschemeng.2c00197 ↗
36. Rational design of a P2-type spherical layered oxide cathode for high-performance sodium-ion batteries10.1021/acscentsci.9b00982 ↗