Strong metal-support interaction induced by oxygen vacancies to enhance the activity and durability of Pt/TiO2/ hollow carbon nanospheres ORR catalyst
Source abstract
Abstract
For the commercial Pt-loaded carbon oxygen reduction reaction (ORR) catalysts used in proton exchange membrane fuel cells (PEMFC), carbon support corrosion, along with the migration and aggregation of Pt nanoparticles (NPs) due to the weak interaction between Pt NPs and carbon, leads to a drastic reduction in both electrocatalytic activity and stability. Hence, exploring active and steady supports is crucial to restrain the activity loss and stabilize Pt catalysts. In this work, a composite support consisting of hollow carbon nanospheres (HC) and TiO 2 NPs with abundant oxygen vacancies (OV) loaded with Pt NPs (PTHC-H) was designed and synthesized. Experiment results show that PTHC-H exhibits superior activity and stability compared to PTHC-N (TiO 2 with lower OV content) and commercial Pt/C catalyst. Specifically, PTHC-H delivers a half-wave potential of 0.883 V versus reversible hydrogen electrode. And its mass activity and half-wave potential decrease by only 15.96 % and 7 mV, respectively, after 10,000 cycles of accelerated durability testing. The excellent activity and stability are ascribed to the enhanced metal-support interaction induced by OV, which can optimize the Pt d‐band center and suppresses the migration and aggregation of Pt NPs. This work may be favorable for designing efficient and durable anti-corrosion nano catalysts.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Catalytic Processes in Materials Science · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. NbOx nano-nail with a Pt head embedded in carbon as a highly active and durable oxygen reduction catalyst10.1016/j.nanoen.2020.104455 ↗
2. Carbon-based single-atom catalysts: Impacts of atomic coordination on the oxygen reduction reaction10.1039/D3NR01272G ↗
3. Regulating catalytic properties and thermal stability of Pt and PtCo intermetallic fuel-cell catalysts via strong coupling effects between single-metal site-rich carbon and Pt10.1021/jacs.3c03345 ↗
4. Understanding catalytic activity trends in the oxygen reduction reaction10.1021/acs.chemrev.7b00488 ↗
5. Scalable molten salt synthesis of platinum alloys planted in metal-nitrogen-graphene for efficient oxygen reduction10.1002/anie.202115835 ↗
6. Pt-based nanocrystal for electrocatalytic oxygen reduction10.1002/adma.201808115 ↗
7. Effect of hygroscopic platinum_titanium dioxide particles in the anode catalyst layer on the PEMFC performance10.1149/1.3428725 ↗
8. Anti-corrosive SnS2/SnO2 heterostructured support for Pt nanoparticles enables remarkable oxygen reduction catalysis via interfacial enhancement10.1002/adfm.202211638 ↗
9. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
10. Oxygen reduction on a high-surface area Pt/Vulcan carbon catalyst: a thin-film rotating ring-disk electrode study10.1016/S0022-0728(00)00407-1 ↗
11. Progress in modified carbon support materials for Pt and Pt-alloy cathode catalysts in polymer electrolyte membrane fuel cells10.1016/j.pmatsci.2016.06.002 ↗
12. Scaffold-like titanium nitride nanotubes with a highly conductive porous architecture as a nanoparticle catalyst support for oxygen reduction10.1021/acscatal.6b00384 ↗
13. Mesoporous chromium nitride as a high performance non-carbon support for the oxygen reduction reaction10.1039/c3cp51109j ↗
14. Engineering stable electrocatalysts by synergistic stabilization between carbide cores and Pt shells10.1038/s41563-019-0555-5 ↗
15. Mxene (Ti3C2Tx) and carbon nanotube hybrid-supported platinum catalysts for the high-performance oxygen reduction reaction in PEMFC10.1021/acsami.0c02446 ↗
16. Wo3 nanorods bearing interconnected Pt nanoparticle units as an activity-modulated and corrosion-resistant carbon-free system for polymer electrolyte membrane fuel cells10.1021/acsaem.9b02333 ↗
17. Enhancement of the catalytic activity and load cycle durability of a PtCo alloy cathode catalyst supported on Ta-doped SnO2 with a unique fused aggregated network microstructure for polymer electrolyte fuel cells10.1021/acsaem.0c00993 ↗
18. Tuning oxygen vacancy in SnO2 inhibits Pt migration and agglomeration towards high-performing fuel cells10.1016/j.apcatb.2022.122017 ↗
19. Nano titanium oxide catalyst support for proton exchange membrane fuel cells10.1016/j.ijhydene.2008.09.032 ↗
20. Development of a titanium dioxide-supported platinum catalyst with ultrahigh stability for polymer electrolyte membrane fuel cell applications10.1021/ja904810h ↗
21. N-doping holey graphene TiO2-Pt composite as efficient electrocatalyst for methanol oxidation10.1021/acsaem.9b02364 ↗
22. Negatively charged platinum nanoparticles on dititanium oxide electride for ultra-durable electrocatalytic oxygen reduction10.1039/D3EE01211E ↗
23. Anchoring ultrafine Pt electrocatalysts on TiO2-C via photochemical strategy to enhance the stability and efficiency for oxygen reduction reaction10.1016/j.apcatb.2018.05.085 ↗
24. Constructing effective TiO2 nano-coating for high-voltage Ni-rich cathode materials for lithium ion batteries by precise kinetic control10.1016/j.jpowsour.2020.228745 ↗
25. Oxygen reduction reaction activity and long-term stability of platinum nanoparticles supported on titania and titania-carbon nanotube composites10.1016/j.jpowsour.2018.08.036 ↗
26. Non defect-stabilized thermally stable single-atom catalyst10.1038/s41467-018-08136-3 ↗
27. Facile one-pot synthesis of low cost MnO2 nanosheet/super P Li composites with high oxygen reduction reaction activity for Zn-air batteries10.1016/j.jpowsour.2019.227385 ↗
28. Photocatalytic synthesis of ultrafine Pt electrocatalysts with high stability using TiO2-decorated N-doped carbon as composite support10.1002/cssc.202300393 ↗
29. Engineering vacancy-atom ensembles to boost catalytic activity toward hydrogen evolution10.1002/eem2.12292 ↗
30. Superior durability and stability of Pt electrocatalyst on N-doped graphene-TiO2 hybrid material for oxygen reduction reaction and polymer electrolyte membrane fuel cells10.1016/j.apcatb.2019.118414 ↗
31. Enriched nucleation sites for Pt deposition on ultrathin wo3 nanosheets with unique interactions for methanol oxidation10.1039/C8TA08636B ↗
32. Defect engineering on electrode materials for rechargeable batteries
33. Two-dimensional oxygen-deficient TiO2 nanosheets-supported Pt nanoparticles as durable catalyst for oxygen reduction reaction in proton exchange membrane fuel cells10.1016/j.jpowsour.2020.227972 ↗
34. Surfactant-free assembly of mesoporous carbon hollow spheres with large tunable pore sizes10.1021/acsnano.6b00723 ↗
35. MnO2 nanosheets grown on the internal/external surface of N-doped hollow porous carbon nanospheres as the sulfur host of advanced lithium-sulfur batteries10.1016/j.cej.2017.11.039 ↗
36. Constructing hierarchical spheres from large ultrathin anatase TiO2 nanosheets with nearly 100% exposed (001) facets for fast reversible lithium storage10.1021/ja100102y ↗
37. Hollow C@TiO2 array nanospheres as efficient sulfur hosts for lithium-sulfur batteries10.1039/D0SE01061H ↗
38. Combing strong metal support interaction and N doping to improve the durability of 3D carbon nanosheets supported Pt catalyst10.1016/j.ijhydene.2020.09.102 ↗
39. Fe-N-C electrocatalysts with densely accessible Fe-N4 sites for efficient oxygen reduction reaction10.1002/adfm.202102420 ↗
40. Fe single-atom catalysts on MOF-5 derived carbon for efficient oxygen reduction reaction in proton exchange membrane fuel cells10.1002/aenm.202102688 ↗
41. Opening of bottleneck pores for the improvement of nitrogen doped carbon electrocatalysts10.1002/aenm.201502389 ↗
42. MoO3/C-supported Pd nanoparticles as an efficient bifunctional electrocatalyst for ethanol oxidation and oxygen reduction reactions10.1007/s12598-022-02211-x ↗
43. Ultrafast kinetics in a PAN/MgFe2O4 flexible free-standing anode induced by heterojunction and oxygen vacancies10.1021/acsami.2c01159 ↗
44. Engineering bimodal oxygen vacancies and Pt to boost the activity toward water dissociation10.1002/smll.202105588 ↗
45. Strong metal-support interaction boosts activity, selectivity, and stability in electrosynthesis of H2O210.1021/jacs.1c12157 ↗
46. One-pot synthesis of Pt/CeO2/C catalyst for improving the ORR activity and durability of PEMFC10.1016/j.ijhydene.2017.04.039 ↗
47. Strong metal–support interaction in heterogeneous catalysts10.1002/aenm.202201395 ↗