Synthesis and luminescent properties of a novel long-afterglow phosphor BaGd2Al2Ga2SiO12: Ce3+
Source abstract
Abstract
With the widespread adoption of blue light chips, the demand for long afterglow phosphors excited by blue light is increasing. The current long afterglow phosphors excited by blue light exhibit relatively low afterglow brightness. However, the afterglow brightness can be effectively enhanced by regulating the activation energy of the host materials. In this study, a novel long afterglow phosphor with photoluminescence, BaY 1.95-xGd xAl 2Ga 2SiO 12: 0.05Ce 3+(0≤ x ≤1.95), was prepared using a high-temperature solid-state method. The activation energy between the 5d 1 level and the conduction band (CB) in the material was regulated through the single substitution of Y With Gd (When x = 1.95, Y is completely substituted by Gd, forming BaGd 2Al 2Ga 2SiO 12: Ce 3+). As the concentration of Gd increases, the Stokes shift of the emission spectrum increases, and the activation energy between the 5d 1 level and the CB decreases from 0.38 eV to 0.32 eV, making it easier for electrons to enter the conduction band, thereby enhancing the afterglow intensity. Furthermore, it was found that the substitution of Gd leads to a strengthening of the crystal field splitting of Ce 3+ and a weakening of the centroid shift, which in turn causes a red shift in the spectrum. The AC-LED fabricated by combining BaGd 1.95Al 2Ga 2SiO 12: 0.05Ce 3+ long afterglow phosphor with a blue light chip effectively reduces flicker to 68.80 %.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Microwave Dielectric Ceramics Synthesis · Radiation Detection and Scintillator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Designing next generation of persistent luminescence: recent advances in uniform persistent luminescence nanoparticles
2. Quasi-continuous defect levels in broadband gap: a new strategy for high-temperature long persistent luminescence materials
3. 2024. Co-doping Sm3+ transforms Y2Ge2O7: Pr3+ into a novel orange-reddish long afterglow phosphor10.1016/j.jallcom.2024.175581 ↗
4. Light battery” role of long afterglow phosphor for round-the-clock environmental photocatalysis10.1016/j.jclepro.2024.142041 ↗
5. Mechanism analysis on manipulation of long afterglow luminescence properties of Y3Al5-xGaxO12: Ce3+, Cr3+ phosphors10.1016/j.jlumin.2024.120537 ↗
6. Red-light-activated red-emitting persistent luminescence for multicycle bioimaging: a case study of CaS: Eu2+, Dy3+10.1021/acs.jpcc.0c04875 ↗
7. Persistent luminescence instead of phosphorescence: history, mechanism, and perspective10.1016/j.jlumin.2018.09.047 ↗
8. Long persistent phosphors--from fundamentals to applications10.1039/C5CS00582E ↗
9. Colorful ultralong room temperature phosphorescent afterglow with excitation wavelength dependence based on boric acid matrix10.1002/adfm.202306956 ↗
10. The “photons storage pool” effect of long afterglow phosphor for round-the-clock photocatalytic clean energy evolution
11. All-inorganic Mn 2+-doped metal halide perovskite crystals for the late-time detection of X-ray afterglow imaging10.1039/D3NR02208K ↗
12. Bandgap tailoring via Si doping in inverse-garnet Mg3Y2Ge3O12: Ce3+ persistent phosphor potentially applicable in AC-LED10.1021/acsami.5b06071 ↗
13. Enhanced blue-light excited cyan-emitting persistent luminescence of BaLu2Al2Ga2SiO12:Ce3+, Bi3+ phosphors for AC-LEDs via defect modulation10.1038/s41377-022-00868-8 ↗
14. Blue-light activated green emitting BaY2Al2Ga2SiO12: Ce3+, Bi3+: efficient persistent luminescence phosphors for AC-LEDs10.1039/D2QI02349K ↗
15. Simple and cost-effective synthesis of a rare-earth free long afterglow phosphor for dark visual markings
16. The effects of Lu3+, Gd3+ and Ga3+ substitution on the photoluminescence of Y2.95−x−yLuxGdyAlzGa5−zO12: 0.05 Ce3+phosphors for high-power white AC-LEDs10.1039/D3DT04351G ↗
17. X-ray induced long afterglow luminescence from UVC to red region in Ca2P2O7: Pr3+10.1016/j.jre.2024.08.012 ↗
18. Time-dependent multicolor afterglow from dual persistent luminescence of fluorescence and phosphorescence in a UV-cured polyurethane matrix10.1021/acsmaterialslett.3c01498 ↗
19. Preparation and anti-counterfeiting application of Sr3Y2Ge3O12: Bi2+ red long afterglow luminescent10.1016/j.mssp.2024.108703 ↗
20. Super long ultraviolet-A persistent luminescence and photo-stimulated luminescence from CaMgGeO4: Bi3+10.1016/j.ceramint.2024.05.069 ↗
21. Effective long afterglow amplification induced by surface coordination interaction10.1002/advs.202306942 ↗
22. Controlling persistent luminescence in nanocrystalline phosphors10.1038/s41563-022-01468-y ↗
23. Study of NIR long afterglow luminescent materials are used in silicon solar cells to produce electricity under dark condition10.1016/j.optmat.2024.115217 ↗
24. Transformation of refractory ceramic MgAl2O4 into blue light emitting nanomaterials by Sr2+/Cr3+ activation
25. Enhanced afterglow properties in reddish-orange Ca2SnO4: Sm3+ phosphors by NH4Cl or CaCl2 flux.10.1016/j.optmat.2023.114773 ↗
26. Lu2CaMg2(Si1-xGex)3O12:Ce3+ solid-solution phosphors: bandgap engineering for blue-light activated afterglow applicable to AC-LED10.1039/C6TC03818B ↗
27. Persistent and photo-stimulated luminescence in Ce3+/Cr3+ activated Y3Al2Ga3O12 phosphors and transparent phosphor-in-glass10.1039/C6TC04140J ↗
28. Control of electron transfer between Ce3+ and Cr3+ in the Y3Al5-xGaxO12 host via conduction band engineering10.1039/C5TC00546A ↗
29. Temperature and wavelength dependent trap filling in M2Si5N8:Eu (M=Ca, Sr, Ba) persistent phosphors10.1016/j.jlumin.2011.10.022 ↗
30. X-ray diffraction and the Bragg equation10.1021/ed074p129 ↗
31. Improving quantum efficiency and thermal stability in blue-emitting Ba2–xSr x SiO4: Ce3+ phosphor via solid solution10.1021/acs.chemmater.8b01652 ↗
32. Composition screening in blue-emitting Li4Sr1+xCa0.97–x(SiO4) 2: Ce3+ phosphors for high quantum efficiency and thermally stable photoluminescence10.1021/acsami.7b08671 ↗
33. Optically stimulated luminescence phosphors: principles, applications, and prospects
34. 5d-level energies of Ce3+ and the crystalline environment. I. Fluoride compounds10.1103/PhysRevB.62.15640 ↗
35. Relating the energy of the [Xe] 5d1 configuration of Ce3+ in inorganic compounds with anion polarizability and cation electronegativity10.1103/PhysRevB.65.235110 ↗
36. Cyan-green phosphor (Lu2M)(Al4Si)O12: Ce3+ for high-quality LED lamp: tunable photoluminescence properties and enhanced thermal stability10.1021/acs.inorgchem.8b03017 ↗
37. Vacuum referred binding energy (VRBE)-guided design of orange persistent Ca3Si2O7: Eu2+ phosphors10.1021/acs.inorgchem.7b01214 ↗
38. Structural ordering and charge variation induced by cation substitution in (Sr, Ca) AlSiN3: Eu phosphor10.1021/jacs.5b06080 ↗
39. Unraveling the mechanisms of thermal quenching of luminescence in Ce3+-doped garnet phosphors10.1021/acs.chemmater.8b05300 ↗
40. Luminescence of Ce3+-doped MB2Si2O8 (M= Sr, Ba): a deeper insight into the effects of electronic structure and Stokes shift10.1021/acs.jpcc.5b10355 ↗
41. Near-infrared long afterglow in Fe3+-activated Mg2SnO4 for self-sustainable night vision10.1021/acsami.3c00673 ↗
42. Revealing trap depth distributions in persistent phosphors10.1103/PhysRevB.87.045126 ↗
43. Phosphor-in-glass for high-powered remote-type white AC-LED10.1021/am506251z ↗