Microstructure of ternary Sn-Bi-xCu alloy on mechanical properties, current endurance and corrosion morphology via cycling corrosion test
Source abstract
Abstract
Low melting temperature of Sn-58 wt% Bi (SB) solders adding 0.5 wt% Cu (SB05C) and 1.7 wt% Cu (SB17C) concentrations were evaluated for the signal transmission in the 3D IC package. Microstructure combined with phase analysis and Pandat simulation were together with to explain the relationship among the mechanical property, electrical endurance and corrosion resistance. By Cu decoration, the presence Cu 6Sn 5 intermetallic compound (IMC) acts as heterogeneous nucleation sites to reduce surface free energy and generate fine Bi grain that resulted in higher hardness value. The power-law was used to explain the mechanism of interfacial IMC growth, both Cu 6Sn 5 and Cu 3Sn formation were speculated to be volume diffusion control and surface reaction domination, respectively. The fracture morphology by shear testing indicates that earliest plastic deformation accompanied with brittle rupture were major factors due to the intergranular fracture and Cu 6Sn 5 compound induced bulk fracture. By cycling corrosion test (CCT), the lump shape of SnO 2 by-product was found among solders at three cycling. After seven cycling, Sn phase has been completely corroded and Cu 6Sn 5 IMC began to be corroded forming circle shape of Cu 2O but Bi phase still not be corroded among solders. In the electrical endurance, dense Cu 6Sn 5 dispersed in solder bulk and fine grain size were feasible to induce current crowding and joule heating, thus Cu deteriorated SB solders is easily failed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. J.A. Lim et al, 600mm fan-out panel level packaging (FOPLP) as a scale up alternative to 300mm fan-out wafer level packaging (FOWLP) with 6-sided die protection. In: Proceedings of the 2021 IEEE 71st Electronic Components and Technology Conference (ECTC), 2021. San Diego, CA, USA.10.1109/ECTC32696.2021.00174 ↗
2. K.Kikuchi et al., Research of fan-out panel level package (FOPLP)manufacturing process using single-sided adhesive tape. In: Proceedings of the IEEE CPMT Symposium Japan (ICSJ), 2017. Kyoto, Japan.10.1109/ICSJ.2017.8240094 ↗
3. T. Braun et al., Potential and challenges of fan-out panel level packaging. In: Proceedings of IEEE CPMT Symposium Japan, 2016. Kyoto, Japan.10.1109/ICSJ.2016.7801251 ↗
4. Y.C. Hu et al., CoWoS architecture evolution for next generation HPC on 2.5D system in package. In: Proceedings of the IEEE 73rd Electronic Components and Technology Conference (ECTC), 2023. Orlando, FL, USA.
5. B. Banijamali et al., Reliability evaluation of a CoWoS-enabled 3D IC package. In: Proceedings of the Electronic Components & Technology Conference (ECTC), 2013. Las Vegas, NV, USA.10.1109/ECTC.2013.6575547 ↗
6. G. Hariharan et al., A comprehensive reliability study on a CoWoS 3D IC package. In: Proceedings of the Electronic Components & Technology Conference (ECTC), 2015. San Diego, CA, USA.10.1109/ECTC.2015.7159648 ↗
7. Jr, Characterization of eutectic Sn-Bi solder joints10.1007/BF02655427 ↗
8. Effects of sulfide-forming element additions on the Kirkendall void formation and drop impact reliability of Cu/Sn–3.5Ag solder joints10.1016/j.actamat.2009.06.060 ↗
9. Effects of residual S on Kirkendall void formation at Cu/Sn–3.5Ag solder joints10.1016/j.actamat.2008.07.022 ↗
10. Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron10.1016/j.jallcom.2019.151925 ↗
11. Electrochemical behavior of a lead-free Sn–Cu solder alloy in NaCl solution10.1016/j.corsci.2013.11.010 ↗
12. Fracture of Sn-Ag-Cu solder joints on Cu substrates: I. Effects of loading and processing conditions10.1007/s11664-011-1806-7 ↗
13. Improved strength of boron-doped Sn-1.0Ag-0.5Cu solder joints under aging conditions10.1016/j.intermet.2011.09.008 ↗
14. Nanocomposite SAC solders: the effect of adding CoPd nanoparticles on the morphology and the shear strength of the Sn–3.0Ag–0.5Cu/Cu solder joint10.1007/s13204-020-01325-x ↗
15. Metal deposited nanoparticles as “bridge materials” for lead-free solder nanocomposites10.1007/s13204-023-02898-z ↗
16. Mechanical deformation behavior and mechanism of Sn-58Bi solder alloys under different temperatures and strain rates10.1016/j.msea.2016.03.072 ↗
17. Atomic migration on Cu in Sn-58Bi solder from the interaction between electromigration and thermomigration10.1088/2053-1591/aaf91c ↗
18. Phase characteristic and segregation related with corrosion on hypereutectic Sn-Bi solder under thermal storage and cycling corrosion test10.1016/j.matchemphys.2023.127386 ↗
19. Cu and Ag additions affecting the solidification microstructure and tensile properties of Sn-Bi lead-free solder alloys10.1016/j.msea.2017.08.059 ↗
20. Microstructures and mechanical properties of Sn-58 wt% Bi solder with Ag-decorated multiwalled carbon nanotubes under 85C/85% relative humidity environmental conditions10.1007/s11664-019-07863-7 ↗
21. Effect of Cu on the diffusion behavior of Bi in Sn matrix during electromigration10.1016/j.matchar.2023.113185 ↗
22. Structure and properties of lead-free solders bearing micro and nano particles10.1016/j.mser.2014.06.001 ↗
23. Wetting behaviour and reactivity of lead free Au–In–Sn and Bi–In–Sn alloys on copper substrates10.1016/j.ijadhadh.2006.09.008 ↗
24. Harsh service environment effects on the microstructure and mechanical properties of Sn–Ag–Cu-1 wt% nano-Al solder alloy
25. Effects of minor Fe, Co, and Ni additions on the reaction between SnAgCu solder and Cu10.1016/j.jallcom.2008.11.052 ↗
26. A review of lead-free solders for electronics applications10.1016/j.microrel.2017.06.016 ↗
27. Effect of cooling rate on interfacial fatigue-crack growth in Sn-Pb solder joints10.1109/96.486498 ↗
28. The newly developed Sn–Bi–Zn alloy with a low melting point, improved ductility, and high ultimate tensile strength10.1016/j.mtla.2019.100300 ↗
29. Analysis of low-temperature intermetallic growth in copper-tin diffusion couples10.1007/BF02675563 ↗
30. D.Q. Yu, C.M.L. Wu, C.M.T. Law, L. Wang, J.K.L. Lai, Intermetallic compounds growth between Sn–3.5Ag lead-free solder and Cu substrate by dipping method, 392 (2005) 192-199, https://doi.org/10.1016/j.jallcom.2004.09.023.10.1016/j.jallcom.2004.09.023 ↗
31. Extremely rapid grain growth in scallop-type Cu6Sn5 during solid–liquid interdiffusion reactions in micro-bump solder joints10.1016/j.scriptamat.2020.01.005 ↗
32. Development of low-silver content SAC0307 solder alloy with Al2O3 nanoparticles10.1016/j.msea.2020.139439 ↗
33. Kinetics of Cu6Sn5 and Cu3Sn intermetallic compounds growth and isothermal solidification during cu-Sn transient liquid phase sintering process10.1016/j.jallcom.2023.169631 ↗
34. Effect of cryogenic laser surface modification on the microstructure evolution and corrosion resistance of accident-tolerant FeCrAl alloys10.1016/j.surfcoat.2023.129637 ↗
35. Corrosion characteristics of Sn−20Bi−xCu−yIn solder in 3.5% NaCl solution10.1016/S1003-6326(23)66225-9 ↗
36. Mechanism for serrated cathode dissolution in Cu/Sn/Cu interconnect under electron current stressing10.1016/j.actamat.2011.12.021 ↗
37. Effect of Cu on the diffusion behavior of Bi in Sn matrix during electromigration10.1016/j.matchar.2023.113185 ↗