Effect of voltage and time on microstructure and corrosion resistance of anodic oxidation film on Al-5.5Zn-0.03In-1Mg-0.03Ti-0.08Sn alloy
Source abstract
Abstract
Anodic aluminum oxide (AAO) films were prepared on the surface of Al-5.5Zn-0.03In-1Mg-0.03Ti-0.08Sn alloy in a 160 g/L H 2SO 4 electrolyte. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), immersion weight loss, and electrochemical testing were used to analyze the element and phase composition, surface and cross-section morphology and corrosion resistance of AAO films in NaCl solution. The effects of anodic oxidation voltage and time on the microstructure and corrosion resistance of AAO films were discussed. The results show that the AAO film on the surface of Al-5.5Zn-0.03In-1Mg-0.03Ti-0.08Sn alloy was mainly composed of Al 2O 3, with a dense barrier layer near the aluminum matrix and a porous layer on the outer layer. With the increase of anodic oxidation voltage and oxidation time, the thickness and pore diameter of AAO film increases gradually, and the corrosion resistance increases gradually. After anodizing for 15V-60min, the thickness of AAO film on the surface of Al-5.5Zn-0.03In-1Mg-0.03Ti-0.08Sn alloy reached 45.51μm, the corrosion current density decreased to 0.79 µA/cm 2, and the weight loss decreased to 0.19 µg·cm −2·h −1, showing the best corrosion resistance. This study provides a new method to improve the corrosion resistance of Al-5.5Zn-0.03In-1Mg-0.03Ti-0.08Sn alloy used in the Marine environment and discusses the corrosion behavior of Al-5.5Zn-0.03In-1Mg-0.03Ti-0.08Sn alloy with AAO films in the Marine environment.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Corrosion Behavior and Inhibition · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Prediction model for atmospheric corrosion of 7005-T4 aluminum alloy in industrial and marine environments10.1007/s12613-018-1684-6 ↗
2. Properties degradation and atmospheric corrosion mechanism of 6061 aluminum alloy in industrial and marine atmosphere environments10.1002/maco.201609201 ↗
3. The research progress of aluminum alloy corrosion in marine atmosphere10.4028/www.scientific.net/AMR.1004-1005.136 ↗
4. Morphological characterization of AA5083-H321 aluminum alloy corrosion in NaCl solution under hydrodynamic conditions10.1108/00035590910923446 ↗
5. Corrosion Behavior of 5A05 Aluminum Alloy in NaCl Solution
6. Corrosion resistance of aluminum alloy 5083 in marine environements
7. Recent progress of fabrication, characterization, and applications of anodic aluminum oxide (AAO) membrane: a review
8. Fabrication and fuzzy analysis of AAO membrane with manipulated pore diameter for applications in biotechnology10.3233/JIFS-179673 ↗
9. A comparative study of different electrolytes for obtaining thick and well-ordered nano-porous anodic aluminium oxide (AAO) Films10.1016/j.mspro.2014.07.438 ↗
10. Investigation of surface and mechanical properties of anodic aluminium oxide (AAO) developed on Al substrate for an electronic package enclosure10.1016/j.surfcoat.2020.126273 ↗
11. Improving the corrosion behaviour of 6061 aluminum alloy by controlled anodic formed oxide layer10.37358/RC.17.1.5393 ↗
12. Porous anodic alumina: fabrication, characterization and applications10.1016/S0040-6090(96)09440-0 ↗
13. The bonding strength and corrosion resistance of aluminum alloy by anodizing treatment in a phosphoric acid modified boric acid/sulfuric acid bath10.1016/j.surfcoat.2007.10.041 ↗
14. The effects of anodizing process on the corrosion rate and fatigue life of aluminum alloy 7075-T7310.30684/etj.v38i1A.1594 ↗
15. Characterization of porous anodic aluminium oxide film on aluminium templates formed in anodizing process10.4028/www.scientific.net/AMR.173.55 ↗
16. Anodising of Al 2024-T3 in a modified sulphuric acid/boric acid bath for aeronautical applications10.1016/S0010-938X(02)00082-3 ↗
17. The anodizing of aluminium in sulphate solutions10.1016/0013-4686(70)85024-1 ↗
18. Investigations on the self-organized formation of hexagonal pore structures in anodic alumina10.1149/1.1838867 ↗
19. Boric/sulfuric acid anodizing of aluminum alloys 2024 and 7075: film growth and corrosion resistance10.5006/1.3283942 ↗
20. The mechanism of growth of porous anodic Al2O3 films on aluminium at high film thicknesses
21. Investigation of porous anodic film formation on Aa1050 By electrochemical impedance spectroscopy
22. Bin · 2014
23. Research on variation in nanopore parameters and surface characteristics of anodic aluminum oxide (AAO) films with time-controlled anodization processes10.1007/s10853-024-09806-y ↗
24. Assessment of the corrosion resistance of self-ordered anodic aluminum oxide (AAO) obtained in tartaric-sulfuric acid (TSA)
25. Molarity relationship of electrolyte solution to aluminum anodizing process on morphology and corrosion resistance10.4028/www.scientific.net/MSF.961.91 ↗
26. Surface wettability of macroporous anodized aluminum oxide10.1021/am4001425 ↗
27. A study of pulsed hard anodizing of 6061 aluminum alloy at room temperature
28. The effect of electrolyte temperature and sealing solution in anodizing operation on hardness and wear behavior of 7075 -T6 aluminum alloy
29. Fabrication of porous anodic aluminum oxide by hybrid pulse anodization at relatively high potential10.1007/s00542-013-1948-z ↗
30. Special issue Tailored structure and functional application of anodized films on aluminum reviews. Porous anodic oxide film on aluminum10.4139/sfj.40.1325 ↗
31. Handbook of monochromatic XPS spectra, polymers and polymers damaged by X-Rays
32. Determination of attenuation lengths of photoelectrons in aluminium and aluminium oxide by angle-dependent x-ray photoelectron spectroscopy10.1002/sia.740201108 ↗
33. XPS study of the major minerals in bauxite: Gibbsite, bayerite and (pseudo-)boehmite10.1016/j.jcis.2005.09.054 ↗
34. Characterization of the oxide/hydroxide surface of aluminium using x-ray photoelectron spectroscopy: a procedure for curve fitting the O 1s core level10.1002/1096-9918(200007)29:7<468::AID-SIA890>3.0.CO;2-V ↗
35. Low-temperature atomic layer deposition of Al2O3 thin coatings for corrosion protection of steel: Surface and electrochemical analysis10.1016/j.corsci.2011.02.036 ↗
36. V.A. Phillips, M. Meyerhoff, Scanning Electron Microscopy Study of Porous Anodic Films on Aluminum, (1976). 〈https://dx.doi.org/10.1017/s0424820100114074〉.10.1017/S0424820100114074 ↗
37. Evaluation of anodized aluminum surface obtained from a sulfamic acid bath using electrochemical impedance spectroscopy
38. The relationships between the changes of structure of surface film and the impedance characteristics in the anodic oxidation of aluminium
39. EIS evolution of anodised aluminium by cerium salt sealing in NaCl solution with exposure time10.1179/1743278212Y.0000000045 ↗
40. Structures and Properties of Oxide Barrier-Film of Anodized Aluminum by Electrochemical Impedance Spectroscopy at the Nano-metere Scale
41. Characterisation of sealed anodic films on 7050 T74 and 2214 T6 aluminium alloys10.1016/S0257-8972(01)01717-0 ↗
42. AC-impedance measurements on porous aluminium oxide films10.1016/0010-938X(84)90115-X ↗
43. AC-impedance measurements on corroded porous aluminum oxide films10.1149/1.2108756 ↗
44. Characterization of aluminium surface treatments with electrochemical impedance spectroscopy and spectroscopic ellipsometry
45. A proposed activation mechanism for Al anodes10.5006/1.3593939 ↗
46. Discharge performance of the magnesium anodes with different phase constitutions for Mg-air batteries10.1016/j.jpowsour.2018.06.085 ↗
47. Electrochemical performance of pure Al, Al–Sn, Al–Mg and Al–Mg–Sn anodes for Al-air batteries10.1016/j.jallcom.2019.151708 ↗
48. Corrosion analysis of Al–Zn–In–Mg–Ti–Mn sacrificial anode alloy10.1016/j.jallcom.2010.02.174 ↗
49. Influence of silicon on the corrosion behaviour of Al–Zn–In–Mg–Ti sacrificial anode10.1016/j.corsci.2011.07.039 ↗
50. A flow model of porous anodic film growth on aluminium10.1016/j.electacta.2006.05.054 ↗
51. In situ AFM observation of growth of anodic oxide films on aluminum -mechanism for flattening of the film surface10.4139/sfj.51.625 ↗
52. In situ AFM observation of growth of anodic oxide films on aluminum10.4139/sfj.51.625 ↗
53. Origin of interface instability during the initial growth of porous anodic oxide films
54. Stress-affected and stress-affecting instabilities during the growth of anodic oxide films10.1016/j.electacta.2011.03.123 ↗
55. The mechanism of stress generation during the growth of anodic oxide films on pure aluminium in acidic solutions10.1016/S0013-4686(97)10194-3 ↗
56. Chemical analysis of a single basic cell of porous anodic aluminium oxide templates
57. The effect of applied voltage and anodisation time on anodized aluminum oxide nanostructures10.4028/www.scientific.net/MSF.819.103 ↗
58. Effects of applied potential on the growth process of porous aluminum oxide membrane
59. Detection of nanoscale η-MgZn2 phase dissolution from an Al-Zn-Mg-Cu alloy by electrochemical microtransients10.1002/sia.2868 ↗
60. Kejiang · 2009
61. Electrochemical behavior of Al-5%Zn-0.1%Sn sacrificial anode in aggressive media: influence of its alloying elements and the solidification structure10.5006/1.3585305 ↗
62. Activation of aluminium alloy sacrificial anodes by selenium10.1016/j.corsci.2004.09.010 ↗