Multiscale multilayer (AlCrSiN/CrN)n/Cr/(AlCrSiN/CrN)n coatings with both infrared stealth and tribological properties
Source abstract
Abstract
In this paper, the design and preparation of infrared stealth coatings adapted to wear environments by multi-arc ion plating is researched. The coating has a micrometer and nanometer scale multilayer structure which has been verified by SEM and TEM. At the micrometer scale, the coating has a sandwich layer structure of nitrides/Cr/nitrides. At the nanometer scale, the nitride coating exhibits a nano-multilayer structure of (AlCrSiN/CrN) n. The modulation period of the (AlCrSiN/CrN) n/Cr/(AlCrSiN/CrN) n coating is adjusted by changing the substrate revolution speed (0.5–2.0 r/min) to optimize infrared stealth and wear resistance. At the revolution speed of 1.5 r/min, the XRD pattern indicates that the Al-Cr-N crystalline sizes of the (111) and (200) planes are the smallest (11.68 and 14.54 nm, respectively). When the cycle period n is set to 6 (r=1.5 r/min), HR-TEM shows that the AlCrSiN layer exhibits semi-coherent epitaxial growth with the CrN layer. The multiscale multilayer design results in the lowest infrared emissivity of the coating at wavelengths of 3–5 and 8–14 μm (0.235 and 0.133, respectively). Furthermore, the coating has excellent scratch and wear resistance ( L c3=85.1 N, 25℃-2.42×10 −6 mm 3/(N·m), and 550 ℃-4.81×10 −5 mm 3/(N·m)). The design concepts of multilayer and multiscale provide a framework for the application of coatings in wear and infrared composite environments.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Lubricants and Their Additives · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Nanofibrous Kevlar aerogel films and their phase-change composites for highly efficient infrared stealth10.1021/acsnano.8b08913 ↗
2. The construction of structural defects in MoAlB thin films by leveraging the enhanced Kirkendall effect for improved infrared stealth performance10.1016/j.ceramint.2024.03.226 ↗
3. Latest research progress of infrared stealth textiles10.1016/j.infrared.2024.105313 ↗
4. Application, development, and challenges of stealth materials/structures in next-generation aviation equipment10.1016/j.apsadv.2024.100575 ↗
5. Mechanical and bioactive properties of PVD TiO2 coating modified PEEK for biomedical applications10.1016/j.jmbbm.2023.105935 ↗
6. Infrared signatures of low-flying aircraft and their rear fuselage skin's emissivity optimization10.2514/1.15365 ↗
7. Microstructure, infrared optical properties and thermal stability of ZrB2 and double-layer-structure Al2O3/ZrB2 thin films by magnetron sputtering technique10.1016/j.apsusc.2020.147280 ↗
8. Temperature characteristics of Ge/ZnS one-dimension photonic crystal for infrared camouflage10.1016/j.optmat.2021.111564 ↗
9. Characteristics of (Mo-Ta-W)-C and (Nb-Ta-W)-C refractory multi-principal element carbide thin films by non-reactive direct current magnetron co-sputtering10.1016/j.jallcom.2022.168260 ↗
10. Structure, mechanical and friction behavior of laminar Ti-incorporated Al2O3 thermal control films deposited on polyethylene terephthalate flexible substrates10.1016/j.vacuum.2018.03.023 ↗
11. Improving the oxidation resistance by forming continuous Al2O3 protective layer in alumina-forming austenitic stainless steel10.1016/j.surfcoat.2024.131279 ↗
12. Improved properties of TiAlN coatings through the multilayer structure10.1016/j.surfcoat.2013.08.006 ↗
13. High-temperature tribological properties of CrAlN, CrAlSiN and AlCrSiN coatings10.1016/j.surfcoat.2011.08.037 ↗
14. Preparation and toughness optimization of (AlCrSiN/TiN)20/Ti multilayer multiscale bionic tool coatings10.1016/j.apsusc.2023.157585 ↗
15. Enhanced multi-scale nanomechanical deformation behavior in reactive plasma sprayed Fe-based amorphous/TiN composite coating10.1016/j.jallcom.2023.171023 ↗
16. Preparation, characterization and performance of Ti1−xAlxN/Ag/Ti1−xAlxN low-emissivity films10.1016/j.apsusc.2013.12.146 ↗
17. Synthesis and Characterization of Multilayered CrAlN/Al2O3 Tandem Coating Using HiPIMS for Solar Selective Applications at High Temperature10.1021/acsaem.3c02310 ↗
18. Thermal stability of multi-layered AlCrN/Cr/AlCrN coatings at elevated temperatures for low thermal emissivity applications10.1016/j.apsusc.2019.143886 ↗
19. Effects of substrate roughness on infrared-emissivity characteristics of Au films deposited on Ni alloy10.1016/j.tsf.2010.12.157 ↗
20. Effect of coating thickness on interfacial adhesion and mechanical properties of Cr-coated zircaloy10.1016/S1003-6326(23)66289-2 ↗
21. Enhancement and optimization of cryogenic metal tube chilldown heat transfer using thin-film coating, I. Effects of flow mass flux and coating layer thickness
22. Erosion behavior of CrN, CrAlN and CrAlN/CrN multilayer coatings deposited on Ti6Al4V10.1016/j.surfcoat.2022.128284 ↗
23. Nanolayer CrAlN/TiSiN coating designed for tribological applications10.1016/j.ceramint.2020.09.034 ↗
24. Synthesis and microstructural characterization of nanoscale multilayer TiAlN/TaN coatings deposited by DC magnetron sputtering10.1007/s00170-018-2972-z ↗
25. Effects of gradient structure and modulation period on mechanical performance and thermal stress of TiN/TiSiN multilayer hard coatings10.1016/j.msea.2023.144696 ↗
26. Design of cycle structure on microstructure, mechanical properties and tribology behavior of AlCrN/AlCrSiN coatings10.1016/j.ceramint.2022.01.087 ↗
27. High temperature tribological properties of TiAlSiN/NiCr multilayer coatings with different modulation periods10.1016/j.ceramint.2024.03.338 ↗
28. The benefits of Cu Kβ radiation for the single-crystal X-ray structure determination of crystalline sponges10.1107/S2052252522002147 ↗
29. Effects of ceramic-based CrN, TiN, and AlCrN interlayers on wear and friction behaviors of AlTiSiN+TiSiN PVD coatings10.1016/j.ceramint.2021.04.015 ↗
30. Synthesis of Nickel-doped Magnesium spinel ferrites (NixMg1-xFe2O4) nanomaterials and study of their structural, electrical and magnetic properties10.1016/j.matchemphys.2023.127912 ↗
31. Raman and XPS depth profiling technique to investigate the corrosion behavior of FeSiAl alloy in salt spray environment10.1016/j.jallcom.2020.155075 ↗
32. Synthesis and characterization of c-TiAlN/h-Cr2N multilayer films deposited by magnetron sputtering on Si (100) substrates10.1016/j.jallcom.2023.173273 ↗
33. Cr and Mg co-doped YAlO3 red cool pigments with high NIR reflectance and infrared emissivity for sustainable energy-saving applications10.1016/j.ceramint.2022.12.250 ↗
34. Development and characterization of laser clad high temperature self-lubricating wear resistant composite coatings on Ti–6Al–4V alloy10.1016/j.matdes.2013.09.038 ↗
35. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
36. Influence of N2 flow rate on microstructure and properties of CrNx ceramic films prepared by MPP technique at low temperature10.1016/j.ceramint.2021.04.086 ↗
37. Structure and wear behavior of AlCrSiN-based coatings10.1016/j.apsusc.2015.12.027 ↗
38. Effect of plasma nitriding ion current density on tribological properties of composite CrAlN coatings10.1016/j.ceramint.2021.10.182 ↗
39. Study on Nanocellulose Properties Processed Using Different Methods and Their Aerogels10.1007/s10924-019-01438-7 ↗
40. Influence of substrate rotation speed on the structure and mechanical properties of nanocrystalline AlTiN/MoN coatings synthesized by cathodic arc ion-plating10.1016/j.surfcoat.2015.01.049 ↗
41. An XPS study of Au alloyed Al–O sputtered coatings10.1016/j.apsusc.2011.01.104 ↗
42. Effect of growth temperature on AlN thin films fabricated by atomic layer deposition10.1016/j.ceramint.2018.06.212 ↗
43. Influences of modulation period on structure and properties of AlTiSiN/AlCrSiN nanocomposite multilayer coatings10.1016/j.vacuum.2021.110516 ↗
44. Effect of nitrogen pressure on mechanical properties of nc-TiAlN/a-Si3N4 nanocomposite coatings deposited by cathodic arc PVD process
45. Mechanical properties of amorphous and crystalline CrN/CrAlSiN multilayer coating fabricated using HPPMS
46. Duplex coating technique to improve the adhesion and tribological properties of CrAlSiN nanocomposite coating10.1016/j.surfcoat.2016.11.032 ↗
47. Hard and tough CrN coatings strengthened by high-density distorted coherent grain boundaries10.1016/j.jallcom.2021.162139 ↗
48. Exceptional adaptable MWIR thermal emission for ordinary objects covered with thin VO2 film10.1016/j.jqsrt.2020.107500 ↗
49. Study on the resistivity and infrared emissivity of TiNx films at different sputtering power10.1016/j.infrared.2021.103946 ↗
50. Modeling the effects of surface roughness on the emissivity of aluminum alloys10.1016/j.ijheatmasstransfer.2006.04.037 ↗
51. Structural property, temperature-resistance characteristics and infrared detection performance of manganese cobalt nickel oxide films deposited by sputtering under different oxygen concentrations10.1016/j.materresbull.2024.112684 ↗
52. Enhancement of infrared response speed via modulating crystallinity of highly-oriented PbS polycrystalline thin films10.1016/j.infrared.2022.104033 ↗
53. Preparation of AZO/Cu/AZO films with low infrared emissivity, high conductivity and high transmittance by adjusting the AZO layer10.1016/j.apsusc.2021.152051 ↗
54. Effect of substrate rotational speed during deposition on the microstructure, mechanical and tribological properties of a-C:Ta coatings10.1016/j.ceramint.2022.11.262 ↗
55. A kinetic Monte Carlo simulation of film growth by physical vapor deposition on rotating substrates10.1016/j.msea.2004.09.015 ↗
56. High-entropy alloy: An alternative approach for high temperature microwave-infrared compatible stealth10.1016/j.ceramint.2023.05.098 ↗
57. Influence of tribology on global energy consumption, costs and emissions10.1007/s40544-017-0183-5 ↗
58. Scratch resistance of superhard carbon coatings–A new approach to failure and adhesion evaluation10.1016/j.surfcoat.2016.07.109 ↗
59. Low cycle fatigue of doped tetrahedral amorphous carbon coatings by repetitive micro scratch tests10.1016/j.surfcoat.2024.130687 ↗
60. Improvement of the tribological behavior of TiN/CrN multilayer coatings by modulation wavelength variation10.1016/j.triboint.2023.109226 ↗
61. Effect of the modulation geometry on mechanical and tribological properties of TiSiN/TiAlN nano-multilayer coatings10.1016/j.surfcoat.2021.127586 ↗
62. Microstructure and wear behavior of (ZrTaNb)C/N quaternary ceramic coatings prepared by double-cathode glow plasma surface alloying on titanium alloy10.1016/j.wear.2023.204789 ↗
63. Development of TiNbMoMnFe multi-principal element alloy coating using mechanical alloying and HVOF thermal spray10.1016/j.ijrmhm.2024.106710 ↗
64. The crystalline structure of gadolinium oxide nanoparticles (Gd2O3-NPs) synthesized at different temperatures via X-ray diffraction (XRD) technique10.1016/j.radphyschem.2020.109212 ↗
65. Microstructure, mechanical properties and tribological behaviors of (Co0.33Ni0.33Cr0.23Mo0.1)80−xNbx(B0.3Si0.7)20 high entropy amorphous alloy coatings10.1016/j.jallcom.2023.169055 ↗
66. Oxygen concentration – A governing parameter for microstructural tailoring of duplex AlCrSiON coatings for superior mechanical, tribological, and anti-corrosion performance10.1016/j.jallcom.2024.175345 ↗