journal article·2024-12

Effect of B2O3 additive on the microstructure and luminescent properties of spark plasma sintered YAG: Ce transparent ceramics

Ziqiang Jiang, Jingtian Li, Guodong Sun, Weihua Luo, Peng Zhao

Publisher page

Abstract

Transparent ceramics Y 3Al 5O 12: Ce 3+ (YAG: Ce) were prepared by the spark plasma sintering (SPS) process with B 2O 3 acting as the sintering additive. The effect of B 2O 3 on the microstructure and luminescent properties were examined. With the help of the liquid phase created by the low melting point B 2O 3 additives, the carbon contamination of the SPS prepared YAG: Ce ceramics was remarkably relieved, the relative density and the in-line transmittance were enhanced, and the starting temperature of densification was lowered by approximately 170 °C. Moreover, the B 2O 3 additive could enter into the YAG host lattice as a dopant. Consequently, the smaller B 3+ ions replaced the Al 3+ ions, enhancing the crystal field splitting of Ce 3+ and significantly redshifting its 5d→4 f emission band.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Glass properties and applications · Solid State Laser Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Perovskite light-emitting diodes with an external quantum efficiency exceeding 30%10.1002/adma.202302283 ↗
2. Robust, narrow-band nanorods LEDs with luminous efficacy > 200 lm/w: next-generation of efficient solid-state lighting10.1002/smll.202470329 ↗
3. Superior quantum efficiency blue-emitting phosphors with high thermal stability toward multipurpose LED applications10.1002/adom.202302870 ↗
4. Glass ceramic phosphors: towards long-lifetime high-power white light-emitting-diode applications-a review10.1002/lpor.201700344 ↗
5. , Al2O3–Ce:YAG and Al2O3-Ce:(Y,Gd)AG composite ceramics for high brightness lighting: effect of microstructure10.1016/j.matchar.2021.110883 ↗
6. Zhang, Dependence of emitting light for LEDs fabricated by YAG: Ce crystal wafer on wafer thickness10.1016/j.jlumin.2018.08.024 ↗
7. All-inorganic light convertor based on phosphor-in-glass engineering for next-generation modular high-brightness white LEDs/LDs10.1021/acsphotonics.7b00049 ↗
8. YAG: Ce3+ transparent ceramic phosphors brighten the next-generation laser-driven lighting10.1002/adma.201907888 ↗
9. Ce:(Lu,Sr)3(Al,Si)5O12 transparent ceramics for high-power white LEDs/LDs with ultra-high luminance saturation threshold10.1039/D4TC00648H ↗
10. Wang Guo, (Ce, Gd): YAG-Al2O3 composite ceramics for high-brightness yellow light-emitting diode applications10.1016/j.jeurceramsoc.2021.11.027 ↗
11. High luminous efficiency and excellent thermal performance in rod-shaped YAG: Ce phosphor ceramics for laser lighting10.1364/OE.511366 ↗
12. Cr3+ ions improving the spectral properties of YAG: Ce3+ luminescent ceramics for white LD lighting10.1016/j.ceramint.2022.10.072 ↗
13. Exploring the capabilities of high-pressure spark plasma sintering (HPSPS): A review of materials processing and properties10.1016/j.matdes.2023.112238 ↗
14. Reactive SPS of Al2O3–RE: YAG (RE = Ce; Ce+Gd) composite ceramic phosphors10.26599/JAC.2023.9220735 ↗
15. Solid-state single-crystal growth of YAG and Nd: YAG by spark plasma sintering10.1016/j.jmst.2021.08.014 ↗
16. Influence of spark plasma sintering conditions on microstructure, carbon contamination, and transmittance of CaF2 ceramics10.1016/j.jeurceramsoc.2021.10.004 ↗
17. carbon contamination prevention during spark plasma sintering10.1021/acsami.3c07265 ↗
18. Recorded color rendering index in single Ce, (Pr, Mn): YAG transparent ceramics for high-power white LEDs/LDs10.1039/D0TC00032A ↗
19. Red-emitting YAG: Ce, Mn transparent ceramics for warm WLEDs application10.1007/s40145-019-0346-0 ↗
20. Effects of tetraethyl orthosilicate content and sintering temperature on the properties of Y3Al5O12:Ce3+ phosphor ceramics for automotive headlamps
21. Effect of MgO doping on the structure and optical properties of YAG transparent ceramics10.1016/j.jeurceramsoc.2019.10.048 ↗
22. Role of LiF additive on spark plasma sintered transparent YAG ceramics10.1016/j.ceramint.2017.08.119 ↗
23. Effect of extra added Mg2+ and Si4+ on the microstructure and luminescence properties of Ce: YAG ceramic phosphors for high power LED/LD lighting10.1016/j.ceramint.2022.11.331 ↗
24. Single CaO accelerated densification and microstructure control of highly transparent YAG ceramic10.1111/jace.15233 ↗
25. Magnesium fluoride (MgF2) – A novel sintering additive for the preparation of transparent YAG ceramics via SPS10.1016/j.jeurceramsoc.2022.02.003 ↗
26. Synthesis and photoluminescence properties of a novel Sr2Al6O11:Mn4+ red phosphor prepared with a B2O3 flux10.1016/j.jlumin.2017.10.076 ↗
27. Enhanced thermoelectric properties of Bi2Sr2Co2Oy ceramics by dispersing B2O3 additive10.1007/s00339-024-07354-5 ↗
28. Effects of B2O3 additive on sintering behavior and microwave dielectric properties of LaAlO3-doped MgTiO3-CaTiO3 ceramics
29. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
30. Mechanism of the liquid-phase sintering for Nd: YAG ceramics10.1016/j.optmat.2008.04.005 ↗
31. Liquid phase sintering of yttrium oxide: The effect of Al2O3 and SiO2 additives10.1016/j.jeurceramsoc.2023.08.055 ↗
32. , Grain coarsening during liquid phase sintering of zircon–glass composites10.1016/j.ceramint.2023.08.090 ↗
33. Grain growth in sintering: a discrete element model on large packings10.1016/j.actamat.2021.117182 ↗
34. A review on the sintering and microstructure development of transparent spinel (MgAl2O4)10.1111/j.1551-2916.2009.03108.x ↗
35. Distribution of carbon contamination in oxide ceramics occurring during spark-plasma-sintering (SPS) processing: II - Effect of SPS and loading temperatures10.1016/j.jeurceramsoc.2017.12.004 ↗
36. Fifty years of research and development coming to fruition; unraveling the complex interactions during processing of transparent magnesium aluminate (MgAl2O4) spinel10.1111/jace.12637 ↗
37. Study on carbon contamination and carboxylate group formation in Y2O3-MgO nanocomposites fabricated by spark plasma sintering10.1016/j.jeurceramsoc.2019.10.035 ↗
38. Luminescence properties of garnet Y2Mg2Al2Si2O12:Ce3+ phosphors10.1016/j.cplett.2021.138516 ↗
39. Tunable luminescence properties of the Ca3-xLuxSc2-xMgxSi3O12:Ce3+ phosphor based LD lighting10.1016/j.jlumin.2023.120316 ↗
40. Absolute determination of photoluminescence quantum efficiency using an integrating sphere setup10.1063/1.4903852 ↗