Effect of multi-directional compression on microstructure and mechanical properties of Tip/WE43 composite
Source abstract
Abstract
Titanium (Ti) particle-reinforced Mg-4Y–2Nd-1Gd-0.5Zr (WE43) magnesium (Mg) matrix composite (Ti p/WE43) was prepared via vacuum hot-pressing sintering. The multi-directional compression (MDC) treatment significantly enhanced the material`s strength, and the MDC 6 wt% Ti p/WE43 composite exhibits exceptional mechanical properties, with a yield strength (YS) of 255 MPa, ultimate tensile strength (UTS) of 316 MPa, and elongation (EL) of 8.9 %. The presence of Ti particles within the composite hinders the basal slip of the Mg matrix during plastic deformation, facilitating the early onset of tensile twinning. The Ti particles contribute to grain refinement, inhibit slip deformation, and promote the occurrence of additional twins within the grains. The second phase, Mg 41Nd 5, is distributed along the powder boundaries, with dislocation tangles observed within the grains. Twin boundary strengthening is identified as the primary factor for the increased YS in the MDC 6Ti p/WE43 composite. Additionally, the MDC 6Ti p/WE43 composite demonstrates superior thermal conductivity compared to the MDC WE43 alloy, which is attributed to its less pronounced basal texture.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Optimizing microstructure and mechanical properties of bimodal-structured magnesium matrix composites by regulating the remelting time of powder thixoforming10.1016/j.jallcom.2024.174211 ↗
2. Enhancing the mechanical properties and thermal conductivity of Ti/AZ91 composites through integrated extrusion and rolling continuous deformation processing10.1016/j.jallcom.2024.175506 ↗
3. Mechanical properties and microstructural characteristics of Ti/WE43 composites10.1016/j.vacuum.2022.111534 ↗
4. Microstructures and mechanical properties of titanium-reinforced magnesium matrix composites: Review and perspective10.1016/j.jma.2022.07.008 ↗
5. Development and strengthening mechanisms of a hybrid CNTs@SiCp/Mg-6Zn composite fabricated by a novel method10.1016/j.jma.2020.05.012 ↗
6. Heterogeneous deformation-induced strengthening of extruded Tip/WE43 composites10.1016/j.matchar.2023.113526 ↗
7. Development of titanium particulate reinforced AZ31 magnesium matrix composites via friction stir processing10.1016/j.jallcom.2019.153071 ↗
8. Microstructural regulation, work hardening and fracture behavior of Tip reinforced Mg-xGd-2Y-3Zn (x=5, 7, 9 wt%) composites10.1016/j.jallcom.2024.176061 ↗
9. Characterization of accumulative fold-forged magnesium-nickel multilayered composite structures10.1016/j.matchar.2020.110478 ↗
10. Effect of micron-Ti particles on microstructure and mechanical properties of Mg-3Al-1Zn based composites10.1016/j.msea.2021.142526 ↗
11. Effect of Ti particles on the LPSO phase and mechanical properties of TiP/VW94 composites10.1016/j.jmrt.2023.06.172 ↗
12. Insight into the role of Y addition in the microstructures, mechanical and corrosion properties of as-cast Mg-Gd-Y-Zn-Ca-Zr alloys10.1016/j.matdes.2022.110980 ↗
13. Multi-solute solid solution behavior and its effect on the properties of magnesium alloys10.1016/j.jma.2022.06.015 ↗
14. Texture dependencies on flow stress behavior of magnesium alloy under dynamic compressive loading10.1016/j.vacuum.2021.110323 ↗
15. A review on casting magnesium alloys: modification of commercial alloys and development of new alloys10.1016/j.jmst.2016.07.001 ↗
16. Effects of welding wire composition on the repair welds of sand-cast Mg-Gd-Y alloy: microstructure and mechanical properties10.1016/j.vacuum.2022.110919 ↗
17. Effect of Ca on hot tearing susceptibility of WE43 alloy10.1016/j.jallcom.2024.175451 ↗
18. Achieving fully equiaxed grain microstructure and isotropic mechanical properties in wire arc additive-manufactured Mg-Y-Nd-Zr alloys10.1016/j.jallcom.2023.171041 ↗
19. Achieving exceptional strength and ductility combination in a heterostructured Mg-Y alloy with densely refined twins10.1016/j.jmst.2023.11.042 ↗
20. Stress-strain response of textured AZ31B magnesium alloy under uniaxial tension at the different strain rates10.1016/j.msea.2012.08.103 ↗
21. Effect of pre-deformation on microstructure and mechanical properties of WE43 magnesium alloy II: Aging at 250 and 300 °C10.1016/j.jma.2019.11.012 ↗
22. Plastic deformation behavior of Mg–8Li dual phase alloy during multi-directional compression10.1016/j.jmrt.2024.07.189 ↗
23. Mechanical properties and corrosion behavior of a ZK60 magnesium alloy containing profuse twins and precipitates10.1016/j.jmrt.2024.01.215 ↗
24. Strengthening mechanism and microstructure of deformable Ti particles reinforced AZ91 composite10.1007/s40195-022-01428-0 ↗
25. Microstructure and tensile properties of micro-SiC particles reinforced magnesium matrix composites produced by semisolid stirring assisted ultrasonic vibration10.1016/j.msea.2011.08.035 ↗
26. Effect of hot extrusion on the microstructure of a particulate reinforced magnesium matrix composite10.1016/j.msea.2007.03.077 ↗
27. Combining gradient structure and supersaturated solid solution to achieve superior mechanical properties in WE43 magnesium alloy10.1016/j.jmst.2021.04.074 ↗
28. Achieving ultra-high strength in Mg-Gd-Ag-Zr wrought alloy via bimodal-grained structure and enhanced precipitation10.1016/j.jmst.2020.04.031 ↗
29. Increasing strength and ductility of magnesium alloy WE43 by equal-channel angular pressing10.1016/j.msea.2017.12.026 ↗
30. Microstructure, mechanical properties and wear resistance of SiCp/AZ91 composite prepared by vacuum pressure infiltration10.1016/S1003-6326(21)65781-3 ↗
31. Biocorrosion properties of as-extruded Mg-Nd-Zn-Zr alloy compared with commercial AZ31 and WE43 alloys10.1016/j.matlet.2011.08.079 ↗
32. Effect of aggressive ions on degradation of WE43 magnesium alloy in physiological environment10.1016/S1452-3981(23)07718-0 ↗
33. Superior properties of Mg-4Y–3RE-Zr alloy prepared by powder metallurgy10.1016/j.jmst.2016.09.019 ↗
34. Biocorrosion properties of as-extruded Mg-Nd-Zn-Zr alloy compared with commercial AZ31 and WE43 alloys10.1016/j.matlet.2011.08.079 ↗
35. Effect of Zn addition on mechanical and corrosion properties of as-cast and as-extruded WE43 magnesium alloys10.1088/2053-1591/ab51ab ↗
36. Effect of pre-deformation on microstructure and mechanical properties of WE43 magnesium alloy10.1016/j.msea.2017.02.082 ↗
37. Improving the property profile of a bioresorbable Mg-Y-Nd-Zr alloy by deformation treatments10.1016/j.mtla.2020.100841 ↗
38. The effect of thermal and strain-induced aging on the mechanical behavior of room temperature ECAP processing of WE43 magnesium alloy10.1016/j.jmrt.2023.05.069 ↗
39. Recent advancements in thermal conductivity of magnesium alloys10.1016/j.jma.2024.02.007 ↗
40. Anisotropic in-plane fatigue behavior of rolled magnesium alloy with {10−12} twins10.1016/j.msea.2017.06.004 ↗
41. Microstructure evolution and mechanical properties of twinned AZ31 alloy plates at lower elevated temperature10.1016/j.jallcom.2014.07.045 ↗
42. Hall-Petch relation for deformation twinning in solid solution magnesium alloys10.1016/j.msea.2012.10.040 ↗
43. Twinning and its related work hardening during the ambient extrusion of a magnesium alloy10.1016/j.msea.2013.03.078 ↗
44. Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy10.1016/j.msea.2006.09.069 ↗
45. Internal stress relaxation and load redistribution during the twinning–detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A10.1016/j.actamat.2008.04.006 ↗
46. Annealing hardening in detwinning deformation of Mg-3Al-1Zn alloy10.1016/j.msea.2013.11.080 ↗
47. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging10.1016/j.actamat.2020.09.024 ↗
48. Synergistic effects of hybrid (SiC+TiC) nanoparticles and dynamic precipitates in the design of a high-strength magnesium matrix nanocomposite10.1016/j.matchemphys.2020.124048 ↗
49. Microstructure and strengthening mechanism of high strength Mg-10Gd-2Y-0.5Zr alloy10.1016/j.jallcom.2006.03.015 ↗
50. A TEM quantitative evaluation of strengthening in an Mg-RE alloy reinforced with SiC10.1016/j.matchar.2011.04.011 ↗
51. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
52. Effect of pre-deformation on aging characteristics and mechanical properties of a Mg-Gd-Nd-Zr alloy10.1016/j.msea.2008.01.067 ↗
53. Strengthening and toughening of magnesium alloy by {10-12} extension twins10.1016/j.scriptamat.2011.09.033 ↗
54. Solute strengthening of twinning dislocations in Mg alloys10.1016/j.actamat.2014.07.045 ↗
55. The precipitation behavior of a pretwinned Mg-6Al-1Zn alloy and the effect on subsequent deformation10.1557/jmr.2014.248 ↗
56. Periodic segregation of solute atoms in fully coherent twin boundaries10.1126/science.1229369 ↗
57. Effect of annealing twins on Hall-Petch relation in polycrystalline materials10.1016/j.msea.2003.09.100 ↗
58. Tensile properties of copper with nano-scale twins10.1016/j.scriptamat.2005.01.033 ↗
59. Strengthening mechanisms in a high-strength bulk nanostructured Cu-Zn-Al alloy processed via cryomilling and spark plasma sintering10.1016/j.actamat.2012.09.036 ↗
60. Additive manufacturing of pure Ti with superior mechanical performance, low cost, and biocompatibility for potential replacement of Ti-6Al-4V10.1016/j.matdes.2020.109142 ↗
61. Development of a novel Mg-Y-Zn-Al-Li alloy with high elastic modulus and damping capacity10.1016/j.msea.2020.139744 ↗
62. Origin of low Young modulus of multicomponent, biomedical Ti alloys - seeking optimal elastic properties through a first principles investigation10.1016/j.jmbbm.2018.08.040 ↗
63. Analysis of Cu-decorated Ti particles as a reinforcement for AZ91 alloys prepared using the powder metallurgy method10.1016/j.jmrt.2024.04.196 ↗
64. A review on thermal conductivity of magnesium and its alloys10.1016/j.jma.2019.08.002 ↗
65. Thermal conductivities of molten metals: Part 1 Pure metals10.1179/imr.1996.41.6.209 ↗
66. Effect of Ce addition on thermal conductivity of Mg-2Zn-1Mn alloy10.1016/j.jallcom.2015.03.197 ↗
67. Effect of Ce addition on the microstructure, thermal conductivity and mechanical properties of Mg-0.5Mn alloys10.1016/j.jallcom.2015.11.107 ↗
68. Anisotropy of thermal conductivity and mechanical properties in Mg-5Zn-1Mn alloy10.1016/j.matdes.2012.03.046 ↗
69. Thermal conductivity and mechanical properties of Sm-containing Mg-Zn-Zr alloys10.1080/02670836.2017.1366707 ↗