B, N co-doped 3D hierarchical porous carbon entrapping sulfur for high performance of Li-S batteries
Source abstract
Abstract
The dissolution and diffusion of polysulfide compounds in lithium-sulfur (Li-S) batteries restrict their cyclic stability. The sulfur hosts are the key to achieve good cyclic stability for Li-S batteries. Here, a three-dimensional hierarchical heteroatoms B, N-doped porous carbon (BNC) was prepared as a new sulfur host. The active sulfur can be anchored inside the cathode due to the incorporation of atomic functional groups formed by B and N co-doping, which enhances the adsorption capacity between the cathode and lithium polysulfides. The resulting BNC loaded sulfur (S@BNC) cathode exhibits high specific capacity and electrochemical stability. Specifically, the reversible specific capacity of S@BNC cathode achieved a reversible specific capacity of 1056.8 mAh g −1 at 0.1 C. After 500 cycles, the specific capacity still remains 618.5 mAh g −1 at 0.2 C, which corresponds to a capacity decay rate of 0.0776 %. The results suggest that BNC has great potential as the sulfur host for achieving high performance of Li-S batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Chemical Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Synergetic catalytic regulation of nitrogen doped NiS2/CoS2 heterostructure for polysulfide immobilization in Li-S batteries10.1016/j.jallcom.2024.174113 ↗
2. Quantum spin exchange interactions to accelerate the redox kinetics in Li-S batteries10.1007/s40820-023-01319-8 ↗
3. Co-Fe dual-atom isolated in N-doped graphydine as an efficient sulfur conversion catalyst in Li-S
4. The enhancement mechanism of different single-transition metal atomic catalysts/sulfur cathode on high-performance of Li-S batteries
5. Revealing the role of crystal structure to catalysis: inverse spinel phase Co-Mn-based catalyst for Li-S batteries10.1016/j.cej.2024.150490 ↗
6. CAU-17 derived bismuth nanoparticles embedded in nitrogen doped carbon belts as catalyst layer on separator for high performance Li-S batteries10.1016/j.jallcom.2023.173059 ↗
7. Microwave-assisted synthesis of Cr3C2@C core shell structure anchored on hierarchical porous carbon foam for enhanced polysulfide adsorption in Li-S batteries10.1007/s12274-020-3233-7 ↗
8. Rational design of SnO2 thin film coated cathode with function of entrapping polysulfides for performance enhanced Li-S batteries10.1016/j.jpowsour.2024.234144 ↗
9. Engineering cooperative catalysis in Li-S batteries10.1002/aenm.202300611 ↗
10. Layer-by-layer self-assembled covalent triazine framework/electrical conductive polymer functional separator for Li-S battery10.1016/j.cej.2020.127044 ↗
11. A hierarchical porous carbon aerogel embedded with small-sized TiO2 nanoparticles for high-performance Li-S batteries10.1016/j.carbon.2022.09.086 ↗
12. Designing metal sulfide-based cathodes and separators for suppressing polysulfide shuttling in lithium-sulfur batteries10.1007/s12274-023-6227-4 ↗
13. Unraveling polysulfide’s adsorption and electrocatalytic conversion on metal oxides for Li-S batteries10.1002/advs.202204930 ↗
14. High sulfur loading and shuttle inhibition of advanced sulfur cathode enabled by graphene network skin and N, P, F-doped mesoporous carbon interfaces for ultra-stable lithium sulfur battery, Nano Res
15. Electrochemical reactivation of dead Li2S for Li-S batteries in non-solvating electrolytes10.1002/anie.202218803 ↗
16. A lithium sulfonylimide COF-modified separator for high-performance Li-S batteries10.1007/s12274-023-5683-1 ↗
17. Optimization of the form factors of advanced Li-S pouch cells10.1002/smll.202311850 ↗
18. Recent progress of anode protection in Li-S batteries10.1002/ente.202200944 ↗
19. Suppressing sulfur crosstalk lowers the bar of lithium metal anode for practical Li-S pouch cells
20. Unraveling polysulfide's adsorption and electrocatalytic conversion on metal oxides for Li-S batteries10.1002/advs.202204930 ↗
21. Co/CoSe junctions enable efficient and durable electrocatalytic conversion of polysulfides for high-performance Li-S batteries10.1002/aenm.202204345 ↗
22. Engineering cooperative catalysis in Li-S batteries10.1002/aenm.202300611 ↗
23. Strutted graphene foam loading sulfur for high-rate long-lifetime Li-S batteries10.1016/j.nanoen.2024.109755 ↗
24. Interfacial engineering and coupling of mXene/reduced graphene oxide/C3N4 aerogel with optimized d-band center as a free-standing sulfur carrier for high-performance Li-S batteries
25. MnO2/carbon nanotube free-standing electrode recycled from spent manganese-oxygen battery as high-performance supercapacitor material10.1007/s10853-022-07223-7 ↗
26. Flexible hierarchical Co-doped NiS2@CNF-CNT electron deficient interlayer with grass-roots structure for Li-S batteries10.1002/aenm.202300452 ↗
27. Fe3O4-doped mesoporous carbon cathode with a plumber’s nightmare structure for high-performance Li-S batteries10.1038/s41467-024-49826-5 ↗
28. Level in N-doped carbons modified separator on improving the electrochemical performance of Li-S batteries10.1016/j.electacta.2024.144487 ↗
29. Nanosheet embedded with VN/Mo2C heterointerfaces electrocatalyst for expediting sulfur redox and lithium regulation toward advanced Li-S battery10.1016/j.cej.2024.151115 ↗
30. B/N co-doping rGO/BNNSs heterostructure with synergistic adsorption-electrocatalysis function enabling enhanced electrochemical performance of lithium-sulfur batteries10.1016/j.cej.2023.143377 ↗
31. Sieve tube-inspired polysulfide cathode with long-range ordered channels and localized capture-catalysis microenvironments for efficient Li-S batteries
32. Kinetic evaluation on lithium polysulfide in weakly solvating electrolyte toward practical lithium-sulfur batteries10.1021/jacs.4c02603 ↗