journal article·2024-11

Evaluation of the dielectric, and piezoelectric properties and optimizing the figure of merit of the 0–3 KNN-0.8ZnO/PVDF-HFP piezoelectric composite by the Taguchi method

Hossein Rahsepar, Raziye Hayati, Sirus Javadpour

Publisher page

Abstract

Piezoelectric ceramic and composite materials are attractive for various applications, but they can be challenging to process. In this research, KNN-0.8ZnO with high density (ρ th=95 %), favorable microstructure, and suitable dielectric and piezoelectric properties (K=875, d 33=125 pC/N, tanδ=0.01) was first synthesized. Additionally, polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP) copolymer, known for its advantageous piezoelectric and mechanical properties, was selected as the polymer phase. subsequently, the KNN-0.8ZnO/xPVDF-HFP composite samples with a 0–3 connectivity pattern were made with the cold sintering method. The Taguchi design of experiment (DOE) was employed to determine the optimal condition for maximizing the figure of merit (FOM). Furthermore, an analysis of variance (ANOVA) was carried out to evaluate the significance of individual factors on each measured property. Phase identification was performed using X-ray diffraction (XRD) analysis, while the microstructure was examined using scanning electron microscopy. Among the different composite samples fabricated using the L9 orthogonal array (OA) of the Taguchi method, the KNN-0.8ZnO/20PVDF-HFP composite containing 20 wt% polymer phase, that was cold-sintered under a pressure of 400 MPa at 200 ͦC for 2 h, exhibited the highest FOM value of 1.945Pm 2/N. This result aligns with the optimal conditions predeicated by the Taguchi DOE method. The compressive strength of the KNN-0.8ZnO/20PVDF-HFP composite was assessed through a compression test, yielding a value of 207 MPa, while the elastic modulus was approximately 3 GPa. The findings of this study demonstrate that the cold sintering method is an effective approach for producing dense piezoelectric composites with favorable electrical and mechanical properties, along with a high FOM for energy harvesting applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Lead-free piezoelectrics—the environmental and regulatory issues10.1557/mrs.2018.154 ↗
2. Structure and electrical properties of K0.5Na0.5NbO3–LiSbO3 lead-free piezoelectric ceramics10.1063/1.2715486 ↗
3. Lead-free ferroelectric materials: prospective applications10.1557/s43578-021-00180-y ↗
4. Lead-free piezoelectrics based on potassium-sodium niobate with giant d(33)10.1021/am402548x ↗
5. A review: (Bi,Na)TiO3 (BNT)-based energy storage ceramics
6. BaTiO3-based piezoelectrics: fundamentals, current status, and perspectives10.1063/1.4990046 ↗
7. Domain-wall conduction in ferroelectric BiFeO3 controlled by accumulation of charged defects10.1038/nmat4799 ↗
8. Giant Piezoelectricity in potassium–Sodium Niobate lead-free ceramics10.1021/ja500076h ↗
9. Transferring lead-free piezoelectric ceramics into application10.1016/j.jeurceramsoc.2014.12.013 ↗
10. High d33 lead-free piezoceramics: a review10.1007/s11664-021-09346-0 ↗
11. (K, Na)NbO3-based lead-free piezoceramics: one more step to boost applications10.1093/nsr/nwac101 ↗
12. Potassium–Sodium Niobate lead-free piezoelectric materials: past, present, and future of phase boundaries10.1021/cr5006809 ↗
13. The 0-3 lead zirconate-titanate (PZT)/Polyvinyl-Butyral (PVB) composite for tactile sensing10.3390/s23031649 ↗
14. Ferroelectric ceramics and composites for piezoelectric transducer applications10.35848/1347-4065/ac8bdc ↗
15. Ferroelectric thin films: review of materials, properties, and applications
16. Advances and prospects of PVDF based polymer electrolytes10.1016/j.jechem.2021.04.007 ↗
17. Enhancing piezoelectric properties of PVDF-HFP composite nanofibers with cellulose nanocrystals
18. Piezoelectric responses in poly(vinylidene fluoride/hexafluoropropylene) copolymers10.1063/1.2748076 ↗
19. Enhanced dielectric property and energy storage density of PVDF-HFP based dielectric composites by incorporation of silver nanoparticles-decorated exfoliated montmorillonite nanoplatelets10.1016/j.compositesa.2018.02.020 ↗
20. Tunable dielectric properties of Poly(vinylidenefluoride-co-hexafluoropropylene) films with embedded fluorinated Barium Strontium titanate nanoparticles10.1038/s41598-018-22442-2 ↗
21. Composite electroceramics10.1080/00150198608238734 ↗
22. Flexible composite transducers10.1016/0025-5408(78)90185-X ↗
23. Piezoelectric composite materials10.1533/9781845699758.1.318 ↗
24. Lead-free 0–3-type composites: from piezoelectric sensitivity to modified figures of merit10.1142/S2010135X21500107 ↗
25. Cold sintering process of composites: bridging the processing temperature gap of ceramic and polymer materials10.1002/adfm.201602489 ↗
26. Recent progress in applications of the cold sintering process for ceramic–polymer composites10.1002/adfm.201801724 ↗
27. The cold sintering process: a review on processing features, densification mechanisms and perspectives10.1016/j.jeurceramsoc.2021.09.024 ↗
28. Upside - down composites: fabricating piezoceramics at room temperature10.1016/j.jeurceramsoc.2019.04.052 ↗
29. Cold sintering and electrical characterization of lead zirconate titanate piezoelectric ceramics10.1063/1.5004420 ↗
30. Preparation of Na0.5Bi0.5TiO3 ceramics by hydrothermal-assisted cold sintering10.1016/j.ceramint.2018.12.166 ↗
31. Cold sintering assisted two-step sintering of potassium sodium niobate (KNN) ceramics10.1016/j.mseb.2023.116709 ↗
32. The unusual case of plastic deformation and high dislocation densities with the cold sintering of the piezoelectric ceramic K0.5Na0.5NbO310.1016/j.jeurceramsoc.2023.02.057 ↗
33. Enhanced piezoelectric property in Mn-doped K0.5Na0.5NbO3 ceramics via cold sintering process and KMnO4 solution10.1111/jace.18537 ↗
34. Effect of dwell time on cold sintering assisted sintering based highly transparent 0.9K0.5Na0.5NbO3-0.1LiBiO3 ceramics10.1016/j.jallcom.2020.154249 ↗
35. Elevating electrical properties of (K, Na)NbO3 ceramics via cold sintering process and post-annealing10.1111/jace.18103 ↗
36. Composition, microstructure and electrical properties of K0.5Na0.5NbO3 ceramics fabricated by cold sintering assisted sintering10.1016/j.jeurceramsoc.2018.11.044 ↗
37. Composition segregation and grain growth in (K0.5Na0.5)NbO3 piezoceramics prepared by two-step cold sintering process10.1111/jace.18847 ↗
38. Microstructure and electrical properties of lead free potassium sodium niobate piezoceramics with nano ZnO additive10.1016/j.mseb.2010.04.033 ↗
39. Applying the Taguchi to optimization the densification, and flexural strength of ZrB2–SiC–ZrC-CNFs10.1016/j.matchemphys.2023.127625 ↗
40. Application of Taguchi L32 orthogonal design to optimize flexural strength of ZrB2-based composites prepared by spark plasma sintering10.1016/j.ijrmhm.2015.11.009 ↗
41. Study of the structural, ferroelectric, dielectric, and pyroelectric properties of the K0.5Na0.5NbO3 system doped with Li+, La3+, and Ti4+10.1007/s40145-020-0372-y ↗
42. High-field dielectric properties of oriented Poly(vinylidene fluoride-co-hexafluoropropylene): structure–dielectric property relationship and implications for energy storage applications10.1021/acsapm.9b01224 ↗
43. Electromechanical properties of Ce-doped (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 lead-free piezoceramics10.1007/s40145-018-0304-2 ↗
44. Physical and mechanical properties of PVDF/KNN composite produced via hot compression molding10.1016/j.ceramint.2020.10.199 ↗
45. Piezoelectric and dielectric properties of (K0.44Na0.52Li0.04)(Nb0.86Ta0.10Sb0.04)O3–PVDF composites10.1016/j.ceramint.2011.04.097 ↗
46. Structural evolution of Na0.5K0.5NbO3 at high temperatures10.1016/j.jssc.2010.09.018 ↗
47. Effect of nano- and micron-sized K0.5Na0.5NbO3 fillers on the dielectric and piezoelectric properties of PVDF composites10.1007/s40145-016-0204-2 ↗
48. Piezoelectric and dielectric properties of ((K0.475Na0.495Li0.03)NbO3-0.003ZrO2)/PVDF composites10.1007/s11664-019-06978-1 ↗
49. Dielectric and piezoelectric properties of (K0.475Na0.495Li0.03) NbO3-0.003ZrO2/PVDF 0–3 composite reinforced with two types of nano-ZnO particles10.1007/s10854-019-02650-w ↗