journal article·2024-11

4D printing of the ferrite permanent magnet BaFe12O19 and its intelligent shape memory effect

Guocun Zhang, Haorui Zhai, Xiaodong Li, Shuzhou Yu, Xueling Hu, Bin Sun, Wei Sun, Xin Xiong, Jianlei Wang, Ying Chang

Publisher page

Abstract

4D printing of the barium ferrite permanent magnets provides new opportunities for intelligent structure and process innovation of permanent magnets. In this paper, the preparation, filament manufacture, and intelligent printing methods with shape memory/recovery effect are studied for the barium ferrite permanent magnet. Firstly, the PLA/TPU/BaFe 12O 19 composite materials are developed by adding different contents of ferrite permanent magnet BaFe 12O 19 powders into the PLA/TPU (polylactic acid/thermoplastic polyurethane) matrix. The weight percentage of the BaFe 12O 19 is 10–40 wt% with an interval of 10 wt%. Secondly, the composites are pelletized and further extruded to manufacture composite filaments with different BaFe 12O 19 contents. Scanning electron microscope (SEM) is used for the microstructural analysis. The BaFe 12O 19 particles are uniformly distributed in the PLA/TPU matrix, and the slight particle agglomeration phenomenon occurs in the composite filaments with 30 and 40 wt% BaFe 12O 19. The thermal properties of PLA/TPU/BaFe 12O 19 composite filaments are analyzed by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). After adding the barium ferrite particles, the glass transition temperature of the composite filaments changes within a small range from 53.5 °C to 55 °C. Thirdly, the filaments are successfully manufactured to magnet parts by the fused deposition modeling (FDM) 3D printing for the tests of mechanical, magnetic, and shape recovery properties. With the increase of the barium ferrite content, the magnetic properties show a rising trend, proving the feasibility of using 3D printing technology to make magnets. The shape memory effects of the printed parts are excellent and the shape recovery ratios show a rising trend, from 85.6 % to 88.9 % under heat contact stimulus and from 88.9 % to 97.8 % under electromagnetic induction non-contact stimulus. Relatively, the parts hold fast response speed due to direct contact with the heat source under the heat stimulus, and the parts hold higher shape recovery ratios due to more heats produced under the electromagnetic induction stimulus. The addition of magnetic particles is helpful to improve the heat transfer ability and provide the possibility of non-contact heat transfer. The magnetic parts with complex structure and intelligent shape memory/recovery effect can be achieved for special application requirements. As a result, the research of this paper expands preparation methods of new magnetic composite materials, explores the manufacture process for intelligent magnets and lays a solid foundation for the development of new permanent magnet devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Materials and Mechanics · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Net-shaped barium and strontium ferrites by 3D printing with enhanced magnetic performance from milled powders10.1016/j.jmmm.2019.165664 ↗
2. Enhanced microwave absorption performance via surface modification of BaFe12O1910.1016/j.jmmm.2022.170140 ↗
3. Fused filament fabrication of Nd-Fe-B bonded magnets: comparison of PA12 and TPU matrices
4. Low-cost high-performance ferrite permanent magnet machines in EV applications: A comprehensive review10.1016/j.etran.2020.100080 ↗
5. Designing, prototyping and testing of a ferrite permanent magnet assisted synchronous reluctance machine for hybrid and electric vehicles applications
6. The magnetic orientation of hard ferrites rubber bonded permanent magnets using the injection moulding10.1016/j.sna.2021.112571 ↗
7. Shape-memory polymers and their composites: Stimulus methods and applications10.1016/j.pmatsci.2011.03.001 ↗
8. A review of 4D printing-Technologies, shape shifting, smart polymer based materials, and biomedical applications
9. Magnetocaloric composite materials
10. Light-responsive shape memory polymer composites10.1016/j.eurpolymj.2022.111314 ↗
11. 4D printing of electroactive shape-changing composite structures and their programmable behaviors10.1016/j.compositesa.2022.106925 ↗
12. 3D-printing of novel magnetic composites based on magnetic nanoparticles and photopolymers10.1016/j.jmmm.2018.08.073 ↗
13. Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications10.1016/j.progpolymsci.2019.03.001 ↗
14. The soft NdFeB/Ecoflex composites for soft robot with a considerable magnetostimulated shrinkability10.1016/j.compscitech.2021.109129 ↗
15. Amoeboid soft robot based on multi-material composite 3D printing technology10.1016/j.jmmm.2023.171390 ↗
16. 4D printing of multiple shape memory polymer and nanocomposites with biocompatible, programmable and selectively actuated properties
17. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
18. Miscibility, crystallization and mechanical properties of biodegradable blends of poly(l-lactic acid) and poly(butylene succinate-b-ethylene succinate) multiblock copolymer10.1016/j.tca.2012.03.019 ↗
19. Surprising shape-memory effect of polylactide resulted from toughening by polyamide elastomer10.1016/j.polymer.2009.01.032 ↗
20. Design of biodegradable blends based on PLA and PCL: from morphological, thermal and mechanical studies to shape memory behavior10.1016/j.polymdegradstab.2016.03.037 ↗
21. Shape memory behaviors in cylindrical shell PLA/TPU-cellulose nanofiber bio-nanocomposites: analytical and experimental assessment10.1016/j.compositesa.2017.06.014 ↗
22. Smart polyurethane composites for 3D or 4D printing: general-purpose use, sustainability and shape memory effect10.1016/j.compositesb.2021.109104 ↗
23. Investigation on the properties of poly(l-lactide)/thermoplastic poly(ester urethane)/halloysite nanotube composites prepared based on prediction of halloysite nanotube location by measuring free surface energies10.1016/j.polymer.2016.09.092 ↗
24. Characterization of thermoplastic polyurethane/polylactic acid (TPU/PLA) tissue engineering scaffolds fabricated by microcellular injection molding10.1016/j.msec.2013.07.037 ↗
25. 3D printing of PLA-TPU with different component ratios: fracture toughness, mechanical properties, and morphology10.1016/j.jmrt.2022.11.024 ↗
26. 4D printing of PLA-TPU blends: effect of PLA concentration, loading mode, and programming temperature on the shape memory effect10.1007/s10853-023-08460-0 ↗
27. 4D printing of porous PLA-TPU structures: effect of applied deformation, loading mode and infill pattern on the shape memory performance10.1088/1402-4896/ad1957 ↗
28. Electromagnetic absorption properties and mechanical properties of Fe-Ni alloy/polylactic acid composites fabricated by fused deposition modeling
29. Magnetically activated 3D printable polylactic acid/polycaprolactone/magnetite composites for magnetic induction heating generation10.1007/s42114-023-00687-4 ↗
30. Development of hard ferrite filled thermoplastic elastomers for the production of permanent magnets10.1016/j.sna.2021.113224 ↗
31. Effects of infill orientation and percentage on the magnetoactive properties of 3D printed magnetic elastomer structures
32. Controlling magnetic properties of 3D-printed magnetic elastomer structures via fused deposition modeling10.1063/9.0000220 ↗
33. 3D printing of ABS Barium Ferrite Composites10.3390/ma13061481 ↗
34. 3D printing of magneto-active smart materials for advanced actuators and soft robotics applications10.1016/j.eurpolymj.2023.112718 ↗
35. 3D and 4D printing of PETG-ABS-Fe3O4 nanocomposites with supreme remotely driven magneto-thermal shape-memory performance10.3390/polym16101398 ↗
36. Multi-field-coupling energy conversion for flexible manipulation of graphene-based soft robots10.1016/j.nanoen.2020.104578 ↗
37. Self-sensing properties of 3D printed continuous carbon fiber-reinforced PLA/TPU honeycomb structures during cyclic compression10.1016/j.matlet.2022.132077 ↗
38. Electro-induced shape memory effect of 4D printed auxetic composite using PLA/TPU/CNT filament embedded synergistically with continuous carbon fiber: a theoretical & experimental analysis10.1016/j.compositesb.2021.108994 ↗
39. Facile preparation of rapidly electro-active shape memory thermoplastic polyurethane/polylactide blends via phase morphology control and incorporation of conductive fillers10.1016/j.polymer.2017.02.077 ↗
40. A comprehensive study on shape memory behavior of PEG plasticized PLA/TPU bio-blends10.1016/j.eurpolymj.2019.109372 ↗
41. Eco-friendly TPU/PLA blends for application as shape-memory 3D printing filaments10.1007/s10924-023-02799-w ↗
42. NatureWorks. Ingeo Biopolymer 4032D Technical Data Sheet, access address: https://www.natureworksllc.com/∼/media/files/natureworks/technical-documents/technical-data-sheets/technicaldatasheet_4032d_general_pdf.pdf?la=en.
43. Effects of a new compatibilizer on the mechanical properties of TPU/PEBA blends10.1016/j.eurpolymj.2022.111358 ↗
44. Design of biodegradable blends based on PLA and PCL: From morphological, thermal and mechanical studies to shape memory behavior10.1016/j.polymdegradstab.2016.03.037 ↗
45. Crystallization behaviors regulations and mechanical performances enhancement approaches of polylactic acid (PLA) biodegradable materials modified by organic nucleating agents10.1016/j.ijbiomac.2023.123581 ↗
46. Experimental investigation into mechanical, thermal, and shape memory behavior of thermoresponsive PU/MXene shape memory polymer nanocomposite10.1016/j.heliyon.2024.e24014 ↗
47. Biocompatible shape memory polymer actuators with high force capabilities10.1016/j.eurpolymj.2015.03.067 ↗
48. Multimaterial 3D printing of self-assembling smart thermo-responsive polymers into 4D printed objects: a review