journal article·2024-11Open access

Evaporation of a water droplet on composite materials Cu-SiC, Cu/G and alloy AlMg3: Modeling the wettability of a metal-matrix composite with MDS

S.Y. Misyura, V.S. Morozov, V.A. Andryushchenko, E.G. Orlova

Abstract

Composite materials are widely used in technology. The choice of exact composite material depends on its purpose, functional properties, stability of parameters over time, and specific conditions of use. In this work, the wettability of various materials was studied. The materials used were processed in two ways: polishing and laser texturing with and without craters. The surface wettability using molecular dynamics methods was modeled when changing the concentration of the reinforcing component in the composite. The crystalline grain orientation and surface roughness of the Cu-SiC composite after texturing is different from Cu, which is important to consider when modeling the wettability. The sensitivity of the wettability of various materials to the surface temperature (Δ θ 0 /Δ T w ) was studied experimentally. The maximum sensitivity of the contact angle to temperature was found for the superhydrophobic surface. The minimum sensitivity was observed for polished AlMg3 surface. Power-law dependences of the evaporation rate of water droplet on the contact angle were obtained for various materials in the temperature range of 25–90 °С. As the droplet diameter increases, the influence of the wetting diameter on the evaporation rate decreases, while that of convection increases. The data obtained can be useful for the development of composite materials technologies and optimization of their functional properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Electrohydrodynamics and Fluid Dynamics · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. The electronic properties of graphene10.1103/RevModPhys.81.109 ↗
2. Graphene transistors10.1038/nnano.2010.89 ↗
3. Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems10.1039/C4NR01600A ↗
4. A novel approach to achieve high strength, high plasticity and high conductivity of graphene/Cu composites with graphene core-shell structure10.1016/j.jallcom.2024.175207 ↗
5. Development of sustainable novel Mg-Ca-Sc alloys with exceptional corrosion resistance10.1016/j.jallcom.2023.170251 ↗
6. Corrosion of an Al-Mg-Si alloy under MgCl2 solution droplets10.1016/j.corsci.2011.02.035 ↗
7. Synergistic Effect of Superhydrophobicity and Oxidized Layers on Corrosion Resistance of Aluminum Alloy Surface Textured by Nanosecond Laser Treatment10.1021/acsami.5b06217 ↗
8. Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy10.1016/j.jallcom.2023.172543 ↗
9. Electrochemical behavior and electro-crystallization mechanism of Cu-Ni/Nano-Al2O3 coating with a deposition current density dependence10.1016/j.jallcom.2023.169988 ↗
10. Development of sustainable superhydrophobic coatings on aluminum substrate using magnesium nanoparticles for enhanced catalytic activity, self-cleaning, and corrosion resistance10.1016/j.molliq.2023.122085 ↗
11. Fabrication of Pd nanoparticles on Al substrate with excellent superhydrophobicity and photocatalytic activity10.1016/j.jpcs.2020.109704 ↗
12. Laser Tailoring the Surface Chemistry and Morphology for Wear, Scale and Corrosion Resistant Superhydrophobic Coatings10.1021/acs.langmuir.8b01317 ↗
13. Influence of aluminum content on microstructure and performance of Mg-Zn-Ca-Al-Mn magnesium alloys10.1016/j.jallcom.2023.169719 ↗
14. Recent advances in processing, and mechanical, thermal and electrical properties of Cu-SiC metal matrix composites prepared by powder metallurgy10.1016/j.pmatsci.2023.101191 ↗
15. Fabrication of Cu-SiC composites using powder metallurgy technique10.1016/j.matpr.2018.10.055 ↗
16. An investigation on the influence of sintering temperature on microstructural, physical and mechanical properties of Cu-SiC composites
17. Assembly of gold nanoparticles into microwire networks induced by drying liquid bridges10.1103/PhysRevLett.102.058303 ↗
18. Mechanochromic and Thermochromic Sensors Based on Graphene Infused Polymer Opals
19. 3D-printed glass microfluidics for fluid dynamics and rheology10.1016/j.cocis.2018.12.005 ↗
20. Preparation and application of microfluidic SERS substrate: challenges and future perspectives10.1016/j.jmst.2019.06.018 ↗
21. Analysis and feasibility of an evaporative cooling system with diffusion-based sessile droplet evaporation for cooling microprocessors10.1016/j.applthermaleng.2017.07.006 ↗
22. Combination of PIV and PLIF methods to study convective heat transfer in an impinging jet10.1016/j.expthermflusci.2016.08.009 ↗
23. Nonisothermal desorption of droplets of complex compositions, Thermal Science
24. Dependence of wettability of microtextured wall on the heat and mass transfer: simple estimates for convection and heat transfer10.1016/j.ijmecsci.2019.105353 ↗
25. Dynamic characteristics of water spreading over laser-textured aluminum alloy surfaces10.1016/j.colsurfa.2020.125253 ↗
26. Fabrication of nano-structured super-hydrophobic film on aluminum by controllable immersing method10.1016/j.apsusc.2011.10.029 ↗
27. Laser textured superhydrophobic surfaces and their applications for homogeneous spot deposition10.1016/j.apsusc.2016.01.019 ↗
28. Surface modification of Ti6Al4V alloy via advanced coatings: mechanical, tribological, corrosion, wetting, and biocompatibility studies10.1016/j.jallcom.2024.174418 ↗
29. Anti-biofouling superhydrophobic surface fabricated by picosecond laser texturing of stainless steel10.1016/j.apsusc.2017.12.012 ↗
30. Investigation on bacterial adhesion and colonisation resistance over laser-machined micro patterned surfaces10.1049/mnl.2013.0109 ↗
31. Nanosecond laser micro- and nanotexturing for the design of a superhydrophobic coating robust against long-term contact with water, cavitation, and abrasion10.1016/j.apsusc.2015.01.202 ↗
32. Ultra short pulse laser generated surface textures for anti-ice applications in aviation, in: ICALEO 2009 - 28th Int. Congr. Appl. Lasers Electro-Optics
33. Interaction of two drops at different temperatures: the role of thermocapillary convection and surfactant10.1016/j.colsurfa.2018.09.063 ↗
34. High temperature nonisothermal desorption in a water–salt droplet10.1016/j.ijthermalsci.2015.01.017 ↗
35. The influence of convection on heat transfer in a water layer on a heated structured wall10.1016/j.icheatmasstransfer.2019.01.010 ↗
36. Evaporation and heat exchange of a thin liquid layer under various heating methods: advantages of local heating over uniform heating of the wall10.1016/j.icheatmasstransfer.2023.107138 ↗
37. The velocity field behavior and the nature of deposition of microparticles in a thin layer of colloidal solution at wall heating from one and two laser beams10.1016/j.colsurfa.2023.132508 ↗
38. Intensifying the particle deposition from a colloidal solution for the purpose of liquid purification: comparison of deposition mechanisms and rates10.1016/j.powtec.2023.119346 ↗
39. Characteristics of HFE7100 droplets evaporation on substrates with different thermal conductivity
40. Effects of surface micro-structure of fruits on droplet evaporation process: peach and apple cases10.1016/j.expthermflusci.2023.110927 ↗
41. Taming the coffee-ring effect on solid surface by localized heating upon the suspension droplet10.1016/j.ijheatmasstransfer.2023.124920 ↗
42. Formation of wettability gradient surface on polyethylene terephthalate by maskless argon microplasma jet writing for droplet self-driven application10.1016/j.apsusc.2023.157383 ↗
43. Kinetics of liquid liquid displacement10.1016/0021-9797(69)90411-1 ↗
44. Hydrodynamics of wetting
45. A combined molecular-hydrodynamic approach to wetting kinetics10.1021/la00043a013 ↗
46. Dynamic wetting by liquids of different viscosity10.1006/jcis.2002.8513 ↗
47. Dynamic wetting and spreading and the role of topography10.1088/0953-8984/21/46/464122 ↗
48. Molecular origin of contact line friction in dynamic wetting10.1103/PhysRevFluids.3.074201 ↗
49. Hydrophobic materials and coatings: principles of design, properties and applications10.1070/RC2008v077n07ABEH003775 ↗
50. Thermal-induced transformation of wetting behaviors on laser-textured SiC surfaces10.1007/s11431-016-6058-6 ↗
51. Improving hydrophobicity of laser textured SiC surface with micro-square convexes10.1016/j.apsusc.2012.11.068 ↗
52. Increasing the energy efficiency of cooling systems for energy-saturated equipment by shifting the second kind heat transfer crisis to the higher temperature region
53. Wetting of Cu-SiC composite material modified by nanosecond laser radiation and liquid spreading over It10.3390/app13095223 ↗
54. Boinovich · Appl. Surf. Sci. · 2016 · 37910.1016/j.apsusc.2016.04.056 ↗
55. Influence of HVOF parameters on the corrosion and wear resistance of WC-Co coatings sprayed on AA7050 T710.1016/j.surfcoat.2008.04.055 ↗
56. Durable icephobic coating for stainless steel10.1021/am3031272 ↗
57. Tribological characteristics of aluminium alloy composites manufactured by liquid state casting process – A review10.1016/j.matpr.2023.04.569 ↗
58. Surface texturing techniques to enhance tribological performance: a review
59. Progress in tribological research of SiC ceramics in unlubricated sliding-A review10.1016/j.matdes.2020.108528 ↗
60. Recent development on surface texturing in enhancing tribological performance of bearing sliders10.1016/j.surfcoat.2015.04.017 ↗
61. Effect of different quenching holding times on microstructure, texture and electrical resistivity of NiCrAlFe alloy10.1016/j.jallcom.2024.174670 ↗
62. An insight into texture evolution and tailoring during multi-pass cold pilgering of high-strength titanium alloy tubular materials10.1016/j.jallcom.2024.174835 ↗
63. Spark plasma sintering of ceramics based on silicon nitride and titanium nitride
64. Roles of oxygen and hydrogen in crystal orientation transition of copper foils for high-quality graphene growth
65. Influence of Cu metal on the domain structure and carrier mobility in single-layer graphene10.1016/j.carbon.2012.01.030 ↗
66. Interaction between graphene and copper substrate: the role of lattice orientation10.1016/j.carbon.2013.11.020 ↗
67. Microstructural and kinetic investigation on the suppression of grain growth in nanocrystalline copper by the dispersion of silicon carbide nanoparticles10.1016/j.matdes.2017.01.077 ↗
68. Microstructure, grain growth, and hardness during annealing of nanocrystalline Cu powders synthesized via high energy mechanical milling10.1016/j.matdes.2015.06.064 ↗
69. Tensile properties and fracture characteristics of nanostructured copper and Cu-SiC nanocomposite produced by mechanical milling and spark plasma sintering process10.1007/s11665-018-3267-0 ↗
70. An in situ transmission electron microscope investigation into grain growth and ordering of sputter-deposited nanocrystalline Ni3Al thin films10.1557/JMR.2002.0308 ↗
71. Annealing behavior of Al-Mg-Mn alloy processed by ECAP at elevated temperature
72. The effect of temperature on the contact angle of a water drop on graphene and graphene synthesized on copper10.1016/j.mseb.2023.116341 ↗
73. CHARMM: the biomolecular simulation program10.1002/jcc.21287 ↗
74. UCSF Chimera - a visualization system for exploratory research and analysis10.1002/jcc.20084 ↗
75. Patterned superhydrophobic metallic surfaces10.1021/la8037582 ↗
76. The anomalously high rate of crystallization, controlled by crystal forms under the conditions of a limited liquid volume10.1021/acs.cgd.7b00980 ↗
77. The effect of graphene synthesis duration and copper textures on corrosive behavior and surface wettability10.1007/s10853-023-08839-z ↗
78. The influence of various factors on the transition of the fluorinated graphene wettability from superhydrophilicity to high hydrophobicity
79. Experimental study and modeling of the wettability of fluorine graphene. Corrosion behavior of the fluorine graphene layer on a copper substrate10.1016/j.colsurfa.2024.133269 ↗
80. CHARMM-GUI input generator for NAMD, GROMACS, AMBER, OpenMM, and CHARMM/OpenMM simulations using the CHARMM36 additive force field10.1021/acs.jctc.5b00935 ↗
81. Wetting, droplet evaporation and corrosion behavior of various composite and textured materials10.1016/j.ceramint.2024.03.026 ↗
82. The evaporation of sessile or pendant drops in still air10.1016/0021-9797(77)90396-4 ↗
83. Evaporation of a sessile droplet on a substrate10.1021/jp0118322 ↗
84. The strong influence of substrate conductivity on droplet evaporation10.1017/S0022112008005004 ↗
85. Kutateladze · 1979