journal article·2024-11

Enhanced strength and toughness of carbon fiber reinforced aluminum matrix composite prepared via novel indirect extrusion method

Yunfeng Bai, Jiming Zhou, Chentong Zhao, Kang Yun, Lehua Qi

Publisher page

Abstract

The fabrication of large-sized, high-performance CF/Al composites presents significant challenges for the aerospace industry. This study introduces a novel indirect extrusion (IE) method for the high-quality production of CF/Al composites. The study investigates the infiltration mechanism of the alloy liquid during the IE process, highlights the technique`s advantages, and systematically analyzes the mechanical properties and failure mechanisms of CF/Al composites. Results show that the aluminum liquid initially fills the interlayers and subsequently penetrates the fiber bundles, effectively shortening the infiltration distance. At a casting temperature of 800°C and an infiltration pressure of 40 MPa, the composite exhibits excellent forming quality and microstructural integrity. Compared to direct extrusion (DE) CF/Al composites, IE-CF/Al composites show significant improvements in compressive strength (16.72 %), flexural strength (16.87 %), fracture toughness (43.18 %), and work of fracture (90.61 %). The interlayer alloy and increased fiber spacing in IE-CF/Al composites enhance energy absorption capacity and reduce the risk of brittle fracture. This process lays a solid foundation for the high-quality production and application of CF/Al composites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Interfacial performance of high-performance fiber-reinforced composites improved by cold plasma treatment: a review
2. An experimental strategy and investigation of preparing high-strength and low-expansion carbon fiber reinforced Al matrix composite10.1016/j.jallcom.2024.174978 ↗
3. Influence of microstructures on mechanical properties of the Csf/Mg composite fabricated by liquid-solid extrusion following vacuum pressure infiltration10.1016/j.jallcom.2022.168083 ↗
4. Enhancing understanding metal matrix composites through molecular dynamics simulation: a comprehensive review10.1016/j.commatsci.2024.112993 ↗
5. Effect of Al2O3 coating thickness on microstructural characterization and mechanical properties of continuous carbon fiber reinforced aluminum matrix composites10.1016/j.msea.2020.139839 ↗
6. On the strength of CF/Al-wire depending on fabrication process parameters: melt temperature, time, ultrasonic power, and thickness of carbon fiber coating
7. S. Guo, G. Zhang, Wang, X. Zhao. Development of Cf/Al lens barrel for space infrared telescope, In 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes 2007; 6721: 67210O.10.1117/12.782945 ↗
8. Metal-matrix composites for space applications10.1007/s11837-001-0139-z ↗
9. Effect of TM (TM=Fe, Mn, Cr) alloying on the high temperature properties and strengthening mechanism of Cf/Al composites10.1016/j.compositesb.2021.108622 ↗
10. matrix composites. X
11. Evaluation of reactive wetting kinetics of carbon fibers by molten Al-Ti alloy and its application to the fabrication of Al/carbon fiber composites10.1016/j.jallcom.2023.172168 ↗
12. Study on tensile properties of carbon fiber reinforced AA7075 composite at high temperatures10.1016/j.msea.2021.141931 ↗
13. Microstructure and mechanical properties of Cf/Al composites fabricated by hot coining technique10.1016/j.ceramint.2021.04.207 ↗
14. Enhancement mechanism of carbon fiber on the current-carrying tribological properties of Cf-Al2O3/Cu composites10.1016/j.wear.2023.205033 ↗
15. Achieving optimal infiltration behavior of carbon fiber/Al-2219 composites by chemical modification of carbon fiber10.1016/j.rineng.2024.101843 ↗
16. Effects of interfacial diffusion induced infiltration process on the microstructure evolution and interfacial enhancement of CF/Mg composites10.1016/j.jmatprotec.2021.117143 ↗
17. Manufacturing of aluminum matrix composites reinforced with carbon fiber fabrics by high pressure die casting10.3390/ma15093400 ↗
18. Fabrication and interface optimization of continuous Cf/Al composites with different reinforcement volume fraction10.1016/j.jallcom.2022.168297 ↗
19. Interfacial microstructure evolution and mechanical properties of carbon fiber reinforced Al-matrix composites fabricated by a pressureless infiltration process10.1016/j.msea.2023.145968 ↗
20. Effect of Ni coating thickness on microstructure and properties of CF/Al composites prepared by vacuum pressure infiltration process10.1016/j.vacuum.2024.113101 ↗
21. High compression performance of Cf/SiC-Al composites fabricated by CVI and vacuum pressure infiltration10.1016/j.msea.2021.141051 ↗
22. Temperature resistance properties of unidirectional laminated Cf/SiC-Al prepared by PIP and vacuum pressure infiltration10.3390/ma16155445 ↗
23. Modelling and assessment of carbon fiber reinforced aluminum matrix composites and their laminate squeeze casting fabrication10.1088/2053-1591/abb057 ↗
24. Laminate squeeze casting and equibiaxial bend behavior of carbon fiber fabric reinforced aluminum matrix composites10.1002/adem.202000657 ↗
25. Thermophysical properties of Cu-coated carbon fibers reinforced aluminum matrix composites by stir casting10.1007/s42823-023-00555-7 ↗
26. High temperature tensile, compression and creep behavior of recycled short carbon fibre reinforced AZ91 magnesium alloy fabricated by a high shearing dispersion technique10.1016/j.jma.2021.03.029 ↗
27. Improved wettability and mechanical properties of metal coated carbon fiber-reinforced aluminum matrix composites by squeeze melt infiltration technique10.1016/S1003-6326(21)65498-5 ↗
28. Experimental investigations into mechanical response and damage mechanisms of fiber aluminum hierarchical composites10.1016/j.jallcom.2023.169103 ↗
29. Mechanical properties and corrosion behavior of WZ73 Mg alloy/SiCp composite fabricated by stir asting method
30. Microstructure and Mechanical Properties of Ni-Coated Continuous Carbon Fibers-Reinforced Pure Aluminum Matrix Composites Prepared by Twin-Roll Casting Method10.1002/adem.202100420 ↗
31. Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength10.1016/j.ceramint.2020.10.249 ↗
32. Direct growth of thermally reduced graphene oxide on carbon fiber for enhanced mechanical strength10.1016/j.compositesb.2020.108010 ↗
33. Modeling precipitation process of Al-Cu alloy in electron beam selective melting with a 3D cellular automaton model
34. The effect of nickel coating on the mechanical properties and failure modes of continuous carbon fiber reinforced aluminum matrix composites10.1016/j.jallcom.2022.164134 ↗
35. Effect of interfacial transition layer with CNTs on fracture toughness and failure mode of carbon fiber reinforced aluminum matrix composites10.1016/j.compositesa.2022.107201 ↗
36. Effect of aluminum carbide on thermal conductivity of the unidirectional CF/Al composites fabricated by low pressure infiltration process10.1016/j.compscitech.2014.03.022 ↗
37. Efficient design optimization of nonconventional laminated composites using lamination parameters: A state of the art10.1016/j.compstruct.2018.10.095 ↗
38. Microstructure evolution and fracture behavior of innovative Ti-(SiCf/Al3Ti) laminated composites10.1016/j.jallcom.2018.01.392 ↗
39. Microstructure and mechanical properties of continuous ceramic SiC and shape memory alloy NiTi hybrid fibers reinforced Ti-Al metal-intermetallic laminated composite10.1016/j.jallcom.2017.09.267 ↗
40. Fabrication, interfacial characterization and mechanical properties of continuous Al2O3 ceramic fiber reinforced Ti/Al3Ti metal-intermetallic laminated (CCFR-MIL) composite10.1016/j.msea.2017.02.024 ↗
41. Integrated fabrication of Cf/Al composite and joining with TC4 via liquid-solid infiltration extrusion: microstructure evolution and fracture behavior10.1007/s11661-024-07407-7 ↗
42. Thermomechanical modelling of copper matrix composites reinforced with tungsten fibres10.4028/www.scientific.net/AMR.59.164 ↗
43. Improving the delamination resistance and impact damage tolerance of carbon fibre-epoxy composites using multi-scale fibre toughening10.1016/j.compositesa.2021.106624 ↗
44. Effect of graphene oxide/graphitic nanofiber nanohybrids on interfacial properties and fracture toughness of carbon fibers-reinforced epoxy matrix composites10.1016/j.compositesb.2021.109387 ↗
45. Interfacial failure behavior of PyC-Cf/AZ91D composite fabricated by LSEVI10.1016/j.jmst.2017.12.013 ↗
46. In situ observations of microscale damage evolution in unidirectional natural fibre composites10.1016/j.compositesa.2012.02.007 ↗