journal article·2024-11

Study on the effect of Sc and Zr addition on microstructure, mechanical property and fracture behavior of electron beam welded Be-Al alloys

Yiyun Wei, Yawen Zhao, Kunming Yang, Min Wu, Bin Su, Anyi Yin, Tao Shi, Lei Yang, Chao Lu, Xuefeng Yin, Qingdong Xu, Pengcheng Zhang

Publisher page

Abstract

Because of various excellent properties of low density, high specific strength and stiffness, high modulus, good thermal stability and corrosion-resistant, beryllium-aluminum (Be-Al) alloys have shown great potential to be used in nuclear industries. However, Be-Al alloys suffer from the bottlenecks of low solubility between Be and Al and the lack of effective technology for fabricating large-sized products. Herein, based on Sc and Zr addition, Be-Al-Sc-Zr alloys are successfully fabricated by conducting the electron beam welding (EBW) technology, and the effect of Sc and Zr addition on microstructure, mechanical property and fracture behavior of Be-Al-Sc-Zr alloys are studied. Microstructural characterizations show that both the EBWed Be-Al and Be-Al-Sc-Zr alloys exhibit two distinct zones of substrate zone (SZ) and fusion zone (FZ). Compared to grain size of the SZ and FZ in Be-Al alloys, grain sizes of these two zones in Be-Al-Sc-Zr alloys are significantly refined, thus leading to ultimate tensile strength (UTS) of the Be-Al-Sc-Zr alloys (∼176 MPa) approximately 150 % higher than that of the Be-Al alloys (∼118 MPa). Besides, a newly generated third phase (TP), which is confirmed as Be 13(Sc x, Zr 1-x), forms within Al phase in both SZ and FZ of the Be-Al-Sc-Zr alloys. Different from fracture behavior of Be-Al alloys that preferentially fractures within Al phase or near the Be/Al interface, fracture of the Be-Al-Sc-Zr alloys is prone to occur within Be phase. As revealed by the calculation results of finite element method (FEM), the underlying mechanism for different fracture behaviors mainly ascribe to that the reinforcement of Al phase and existence of the newly formed TP can greatly increase the internal stress and even causes stress concentration within Be phase of the Be-Al-Sc-Zr alloys. The present findings may provide more insights to the micro-alloying and deformation mechanism of Be-Al alloys that with enhanced mechanical properties.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Additive Manufacturing Materials and Processes · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Microstructure and mechanical properties of Be–Al alloy fabricated by laser solid forming10.1016/j.msea.2020.140335 ↗
2. Investigation on the compression properties of semi-solid Be-Al alloy10.1016/j.matlet.2022.132431 ↗
3. Recycling of beryllium swarf for the preparation of Be/Al composites with high mechanical properties by pressure infiltration method10.1016/j.jmrt.2024.02.121 ↗
4. Solubility and partitioning of impurities in Be alloys10.1016/j.jallcom.2016.07.014 ↗
5. Role of twinning and slip during compressive deformation of beryllium as a function of strain rate10.1016/j.ijplas.2011.08.006 ↗
6. The nobility of second phase particles in S-65 beryllium studied by scanning kelvin probe force microscopy10.1016/j.corsci.2016.09.004 ↗
7. Neutron diffraction study of the deformation behavior of beryllium-aluminum composites10.1016/S1359-6454(00)00087-2 ↗
8. Effect of beryllium content and heat treatment on microstructure and yield strength in Be/6061Al composites10.1016/j.jallcom.2018.02.060 ↗
9. High-cycle fatigue of an investment cast, Be-Al metal matrix composite10.1007/s11661-002-0196-0 ↗
10. Numerical simulation and process optimization of vacuum investment casting for Be-Al alloys
11. Effects of processing conditions and test temperature on fatigue crack growth and fracture toughness of Be-Al metal matrix composites10.1016/S0921-5093(02)00391-X ↗
12. Evaluation of the tensile and fatigue behaviourof a powder metallurgy beryllium/aluminium alloy10.1023/A:1018542231893 ↗
13. Evaluation of the tensile and fatigue behaviour of ingot metallurgy beryllium/aluminium alloys10.1023/A:1018677102160 ↗
14. Elevated temperature compressive behavior of a beryllium-aluminum casting alloy10.1016/j.matlet.2018.06.067 ↗
15. Underlying reasons of poor mechanical performance of thick plate aluminum-copper alloy vacuum electron beam welded joints10.1016/j.vacuum.2020.109667 ↗
16. The microstructure and impact toughness of vacuum electron beam welded joints of a highly alloyed dual phase titanium alloy10.1016/j.vacuum.2023.112877 ↗
17. Evolution of microstructure and mechanical properties of vacuum electron beam welded joints in a near beta titanium alloy: influence of heat treatment10.1016/j.vacuum.2022.111362 ↗
18. Formability behavior, microstructural evolution, and mechanical properties of GH4169 and electroformed Ni electron beam welded joint10.1016/j.vacuum.2022.111379 ↗
19. Analysis of the response of thermal-affect and multiplex strengthening mechanisms of Mg-10Gd electron beam welded joint10.1016/j.msea.2022.143608 ↗
20. Micro-mechanical properties and associated strengthening mechanism of Be-Al-Ag-Si alloys fabricated by electron beam welding technique10.1016/j.matchar.2024.113759 ↗
21. Friction-stir welding of a beryllium-aluminum powder metallurgy alloy10.1023/A:1013193708743 ↗
22. A review of FSW research on dissimilar metal and alloy systems10.1007/s11665-010-9598-0 ↗
23. Beryllium-aluminum alloys10.2514/3.28126 ↗
24. Mechanical properties of a rapidly solidified Al-10%Be-2%Li alloy at elevated temperatures
25. Age hardening in beryllium-aluminum-silver alloys10.1016/1359-6454(96)00113-9 ↗
26. A microcompression study on the mechanical properties and fracture behavior of Be–Al and Be–AlSi10Mg alloys fabricated by laser solid forming10.1016/j.msea.2022.142715 ↗
27. Aging behavior of Be/6061Al composite fabricated by hot isostatic pressing technique10.1016/j.jallcom.2018.06.124 ↗
28. Microstructural characterization of novel in-situ Al-Be composites10.1007/BF02830343 ↗
29. Effect of scandium on the phase composition and mechanical properties of ABM alloys10.1134/S0036029510090107 ↗
30. Determination of homogenizing conditions and aging behaviors of cast 62Be-37.6Al-0.4Sc alloy10.1016/j.jallcom.2019.151742 ↗
31. Sc and Sc-Zr effects on microstructure and mechanical properties of Be-Al alloy10.1080/02670836.2017.1407555 ↗
32. Resolving the FCC/HCP interfaces of the γ' (Ag2Al) precipitate phase in aluminium10.1016/j.actamat.2019.04.058 ↗
33. Novel isotropic mechanical properties of laser powder-bed fusion Sc/Zr modified Al alloy10.1016/j.msea.2023.145003 ↗
34. Effects of processing paths on the microstructure, mechanical properties and electrical conductivity of dilute Al-Zr-Sc alloy conductive wires10.1016/j.jmst.2023.11.060 ↗
35. Characterizations on the microstructure and micro-mechanics of cast Be-Al-0.4Sc-0.4Zr alloy prepared by vacuum induction melting10.1016/j.msea.2018.12.027 ↗
36. Microstructural evolution and hardness of as-cast Be-Al-Sc-Zr alloy processed by laser surface remelting10.1016/j.cja.2020.06.005 ↗
37. 3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites10.1016/j.compscitech.2015.11.014 ↗
38. Effect of Mg on microstructure and mechanical properties of Al-Mg alloys produced by high pressure torsion10.1016/j.scriptamat.2018.09.033 ↗
39. Effects of Sc content on the mechanical properties of Al-Sc alloys10.1007/s12598-010-0148-6 ↗
40. The hardness and modulus of polycrystalline beryllium from nano-indentation10.1016/j.ijplas.2018.12.008 ↗
41. High ductility of Be–Al alloy fabricated by investment casting10.1016/j.jmrt.2024.01.099 ↗
42. Micro-mechanical characterisation of uranium10.1016/j.jnucmat.2008.09.035 ↗
43. Effects of scandium addition on microstructure, mechanical and thermal properties of cast Be-Al alloy10.1016/j.jallcom.2017.12.117 ↗
44. Microstructure and properties of vacuum cast Sc-containing be-Al alloys10.1007/s40962-018-0249-9 ↗
45. Be-Sc (Beryllium-Scandium)10.1007/s11669-008-9362-4 ↗
46. Temporal evolution of the nanostructure of Al(Sc,Zr) alloys: Part I-Chemical compositions of Al3(Sc1-xZrx) precipitates10.1016/j.actamat.2005.08.016 ↗
47. Role of silicon in accelerating the nucleation of Al3(Sc,Zr) precipitates in dilute Al–Sc–Zr alloys10.1016/j.actamat.2012.05.036 ↗
48. Nano-structure evolution of secondary Al3(Sc1-xZrx) particles during superplastic deformation and their effects on deformation mechanism in Al-Zn-Mg alloys10.1016/j.jallcom.2016.10.094 ↗
49. Be-Zr (Beryllium-Zirconium)10.1007/s11669-008-9362-4 ↗
50. Al-Be-Sc (aluminum-beryllium-scandium)
51. Microstructural characteristics of electron beam processed Al-2Sc10.4028/www.scientific.net/MSF.654-656.910 ↗
52. Electron beam welding behavior of a 5083-H15 alloy containing Zr and Sc10.1007/s40194-020-00952-w ↗
53. Microstructural development of electron beam processed Al-3Ti-1Sc alloy under different electron beam scanning speeds10.1016/j.matchar.2017.09.005 ↗
54. Modeling of microstructure evolution coupled with molten pool oscillation during electron beam welding of an Al-Cu alloy10.1016/j.ijheatmasstransfer.2022.122735 ↗
55. Underlying reasons of poor mechanical performance of thick plate aluminum-copper alloy vacuum electron beam welded joints10.1016/j.vacuum.2020.109667 ↗
56. Additive manufacturing of metallic components-process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
57. The influence of particle size and particle fracture on the elastic/plastic deformation of metal matrix composites10.1016/1359-6454(96)00008-0 ↗
58. In-situ TiC particles reinforced AA2219 Al-6.3Cu alloy joint via ultrasonic frequency double-pulsed arc10.1016/j.msea.2022.143078 ↗
59. Effect of grain size on the hardness and reactivity of plasma-sintered beryllium10.1016/j.jnucmat.2014.06.019 ↗
60. Optimizing strength and ductility in 7150 Al alloys via rapid electropulsing cyclic heat treatment10.1016/j.jallcom.2022.163985 ↗
61. Eutectic growth under rapid solidification conditions10.1007/BF02650266 ↗
62. Microstructure evolution in laser solid forming of Ti–50wt% Ni alloy10.1016/j.jallcom.2009.02.056 ↗
63. Beryllium as a grain refiner in titanium alloys10.1016/j.jallcom.2009.03.016 ↗
64. H. Okamoto, H. Okamoto, Phase diagrams for binary alloys, ASM international Materials Park, OH, 2000.
65. Al-Be (Aluminum-Beryllium)10.1007/s11669-006-0025-z ↗
66. A combined microstructure strengthening analysis of SiCp/Al metal matrix composites10.1016/0010-4361(95)91381-E ↗
67. Microstructure and mechanical properties in Al-Mg-Sc alloy induced by hetero-deformation10.1016/j.matchar.2021.111622 ↗