journal article·2024-11

Microstructural evolution and creep behavior of a novel Ni-Fe-based superalloy GH2070P for 700 °C class A-USC steam pipes

K.D. Yu, Z.Q. Zhou, G.Y. Zhou, G.H. Cao, J.B. Yan, P. Zhang, P. Li, P. Liu, Y. Yuan

Publisher page

Abstract

The study investigates the microstructural evolution and creep behavior of a GH2070P (HT700P) Ni-Fe-based superalloy, which has the potential for advanced ultra-supercritical coal-fired power plant units at 725 °C/180 MPa and 725 °C/150 MPa. The experimental results reveal that the phase constitution of GH2070P alloy comprises matrix γ, γ′ phases, MC, and M 23C 6 carbides. During the creep, the alloy’s phase structure remains stable without the precipitation of other phases. The sizes of MC and M 23C 6 grow slightly, M 23C 6 carbides tend to form a continuous morphology, and the γ′ phases coarsen. As the creep time increases, the fracture of the alloy undergoes a transition from intergranular to transgranular mode. Transmission electron microscopy investigations indicate that the interaction of dislocations with γ′ phases is governed by the Orowan looping mechanism, and the superlattice stacking faults appear with the increase of creep time. The electron backscattered diffraction analysis shows that, due to the impediment of Σ3 and ΣCSL ≤ 29 grain boundaries, cracks tend to accumulate and interconnect along high-angle grain boundaries, leading to the eventual fracture.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Microstructural evolution and deformation behavior of a Fe-Ni base superalloy during aging10.1016/j.jallcom.2016.10.078 ↗
2. Microstructural study in a Fe-Ni-base superalloy during creep-rupture at intermediate temperature10.1016/j.msea.2015.04.093 ↗
3. Oxygenated treatment on saturated vapour oxidation behaviors of GH2984 alloys for 700 °C ultra-supercritical boilers10.1016/S1875-5372(19)30016-5 ↗
4. Effect of long-term aging on microstructural stability and tensile deformation of a Fe-Ni-based superalloy10.1016/j.msea.2022.143298 ↗
5. Microstructure, thermal stability and tensile properties of a Ni-Fe-Cr based superalloy with different Fe contents10.1016/j.intermet.2022.107785 ↗
6. Creep strength of high chromium steel with ferrite matrix10.1016/j.ijpvp.2010.03.016 ↗
7. Evaluation of structural stability and creep resistance of 9-12% Cr steels10.1002/srin.199605504 ↗
8. Microstructure and phase stability in Inconel alloy 740 during creep10.1016/j.scriptamat.2004.05.047 ↗
9. Influence of γ′ and grain boundary carbide on tensile fracture behaviors of Nimonic 26310.1016/j.msea.2009.06.011 ↗
10. Behavior of M23C6 phase in Inconel 617B superalloy during welding10.1016/j.jmatprotec.2018.03.009 ↗
11. Dislocation motion in a Ni-Fe-based superalloy during creep-rupture beyond 700 °C10.1016/j.matlet.2015.06.076 ↗
12. Phenomenological and microstructural analysis of intermediate temperatures creep in a Ni-Fe-based alloy for advanced ultra-supercritical fossil power plants10.1016/j.actamat.2015.09.006 ↗
13. Tensile properties and deformation mechanisms of a solution treated Ni-Fe-based alloy at high temperatures10.1016/j.msea.2023.145418 ↗
14. Microstructural evolution of a new Ni-Fe-based superalloy deformed by creep10.1016/j.matchar.2023.112917 ↗
15. Microstructural stability and tensile properties of a new γ′-hardened Ni-Fe-base superalloy10.1016/j.mtla.2021.101061 ↗
16. Tensile properties and deformation characteristics of a Ni-Fe-base superalloy for steam boiler applications10.1007/s11661-013-1959-5 ↗
17. Microstructural evolution and mechanical properties of Nimonic 105 alloy aged at 750° C10.1016/j.jallcom.2019.05.289 ↗
18. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
19. Temperature dependence of deformation mechanisms and tensile strength of a new Ni-Fe-base superalloy10.1016/j.matchar.2018.05.032 ↗
20. Creep deformation behavior of a novel precipitate-hardened Ni-Fe-base superalloy at 750 °C10.1007/s11661-019-05611-4 ↗
21. Nanoindentation creep behavior of nanocrystalline Ni and Ni-20 wt% Fe alloy and underlying mechanisms revealed by apparent activation volumes10.1016/j.matdes.2022.111479 ↗
22. Investigation and improvement on structural stability and stress rupture properties of a Ni-Fe based alloy10.1016/j.matdes.2015.09.098 ↗
23. The effect of coarsening of γ′ precipitate on creep properties of Ni-based single crystal superalloys during long-term aging10.1016/j.msea.2019.138886 ↗
24. Microstructural changes and their effect on tensile properties of a Ni-Fe based alloy during long-term thermal exposure10.1016/j.msea.2016.06.018 ↗
25. Investigation on the tensile deformation mechanisms in a new Ni-Fe-base superalloy HT700T at 750 °C10.1016/j.jallcom.2020.154012 ↗
26. Fatigue-creep behaviors of Ni-Fe based superalloy under various testing conditions10.1016/j.jmrt.2021.10.066 ↗
27. Microstructure optimization for higher strength of a new Fe-Ni-based superalloy10.1016/j.msea.2023.144632 ↗
28. High temperature creep deformation mechanisms of a hot corrosion-resistant nickel-based superalloy10.1007/s11665-006-9008-9 ↗
29. Analysis of carbide transformation in MC-M23C6 and its effect on mechanical properties of Ni-based superalloy10.1016/j.jallcom.2022.164959 ↗
30. Effects of long-term thermal exposure on the microstructure and properties of a cast Ni-base superalloy10.1007/s11661-007-9381-5 ↗
31. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
32. Superlattice intrinsic stacking faults in γ′ precipitates10.1016/0036-9748(85)90021-3 ↗
33. Extraordinary deformation modes in Ni-base superalloy CM247LC at room temperature10.1007/s11661-021-06370-x ↗
34. Primary creep in single crystal superalloys: origins, mechanisms and effects10.1016/j.actamat.2006.09.026 ↗
35. Kernel average misorientation confidence index correlation from FIB sliced Ni-Fe-Cr alloy surface10.1017/S1431927611002996 ↗
36. On the origin of planar slip in FCC alloys10.1016/0001-6160(89)90143-0 ↗
37. A unified approach to motion of grain boundaries, relative tangential translation along grain boundaries, and grain rotation10.1016/j.actamat.2004.02.048 ↗
38. Hirth · 1982
39. Gamma prime coarsening and age-hardening behaviors in a new nickel base superalloy10.1016/j.matlet.2003.10.053 ↗
40. Theorie der alterung von niederschlägen durch umlösen (ostwald-reifung)
41. Microstructural stability and mechanical properties of a newly developed Ni-Fe-base superalloy10.1016/j.msea.2014.11.010 ↗
42. Effect of long-term aging on the microstructure, stress rupture properties and deformation mechanisms of a new cast nickel base superalloy10.1016/j.msea.2018.08.096 ↗
43. Coarsening kinetics of γ′ precipitates in a Re-containing Ni-based single crystal superalloy during long-term aging10.1016/j.jmst.2020.05.034 ↗
44. Some new aspects concerning particle hardening mechanisms in γ′ precipitating Ni-base alloys—I10.1016/0001-6160(82)90048-7 ↗
45. On precipitate shearing by superlattice stacking faults in superalloys10.1080/01418618808204522 ↗
46. Effects of microstructure evolution on the deformation mechanisms and tensile properties of a new Ni-base superalloy during aging at 800° C10.1016/j.jmst.2020.08.001 ↗
47. Some new aspects concerning particle hardening mechanisms in γ′ precipitating nickel-base alloys—II10.1016/0001-6160(82)90049-9 ↗
48. Increase of misfit during creep of superalloys and its correlation with deformation10.1016/S1359-6454(99)00456-5 ↗
49. Investigation of γ/γ′ lattice mismatch in the polycrystalline nickel-base superalloy IN738LC: influence of heat treatment and creep deformation10.1016/0956-7151(94)00252-D ↗
50. Kocks · 1975