journal article·2024-10

Mechanical properties and corrosion resistance improvement of TiAlSnMo alloys via Mo addition

Zhihao Feng, Junqi Wang, Huicong Dong, Jing Ma, Jiangang Wang, Xin Zhang, Jianhui Li, Xinyu Zhang

Publisher page

Abstract

In this paper, Ti-5Al-2.5Sn-xMo (TASxM, x = 0,5,10,15 wt%) alloys were designed and prepared. Phase compositon and microstructure analysis results indicate that the addition of Mo reduces the phase transition point of TASxM alloys, stabilizes more β phase to room temperature, and refines the α grains. The strength of the TASxM alloys exhibits a positive correlation with the increasing Mo content within 10 wt%, and the highest ultimate tensile strength (UTS) can be obtained in TAS10M (1260 MPa), which can be primarily attributed to the synergistic effects of phase transition, solid solution strengthening, and fine grain strengthening. Interestingly, the UTS of TAS15M unexpectedly decreases to 724 MPa, which is strongly influenced by the altered slip system numbers resulting from the β/α phase ratio. Even more intriguing is the observation of stress-induced martensitic transformation in the deformed TAS15M alloy, often resulting in a substantial influence on elongation. The corrosion resistance of the TASxM alloy has also been investigated through electrochemical experiments. The findings reveal that the corrosion resistance of the TASxM alloy is enhanced with the elevation of Mo content, peaking at TAS15M. This improved resistance is attributed to the augmented β phase content and the formation of protective MoO 2 and MoO 3 oxide films on the surface of alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Ossicular chain reconstruction with titanium prostheses: A systematic review and meta-analysis10.1097/MAO.0000000000003772 ↗
2. Characterisation of microstructure and mechanical properties of linear friction welded α+ β titanium alloy to nitinol10.3390/app112210680 ↗
3. Study on milling temperature of titanium alloy with micro-textured ball end milling cutter under radius of blunt edge10.3390/app10020587 ↗
4. A New Kind of Biomedical Ti–Mn–Nb Alloy
5. Effect of scandium on microstructure and corrosion resistance of Ti64 alloy in NaCl solution10.1016/j.matchar.2023.112671 ↗
6. Effect of zirconium content on the microstructure and corrosion behavior of as-cast Ti-Al-Nb-Zr-Mo alloy10.1016/j.jmrt.2021.10.102 ↗
7. Research progress of novel zirconium alloys with high strength and toughness10.55713/jmmm.v32i4.1526 ↗
8. Microstructural evolution and mechanical properties of bulk and porous low-cost Ti–Mo–Fe alloys produced by powder metallurgy10.1016/j.jallcom.2020.156768 ↗
9. Biocompatibility of Ti-alloys for long-term implantation10.1016/j.jmbbm.2012.11.014 ↗
10. Effect of molybdenum content on microstructure and mechanical properties of Ti-Mo-Fe Alloys by powder metallurgy10.3390/app12147257 ↗
11. A review on additive manufacturing of titanium alloys for aerospace applications: directed energy deposition and beyond Ti-6Al-4V10.1007/s11837-021-04670-6 ↗
12. D. aryanto, C. Firdharini, The effects of copper on the mechanical properties of Ti-10Mo alloy prepared by powder metallurgy method10.55713/jmmm.v34i1.1813 ↗
13. Study of titanium alloy Ti–Al–Zr–Nb–V during heating under deformation and its phase transformation features10.55713/jmmm.v34i2.1908 ↗
14. Wear behavior of in-situ oxide dispersion strengthened Fe-8Ni alloy with Zr additions10.55713/jmmm.v33i1.1568 ↗
15. High strength biomedical Ti–13Mo–6Sn alloy: Processing routes, microstructural evolution and mechanical behavior10.1016/j.msea.2019.138190 ↗
16. Influence of β-phase stability in elemental blended Ti-Mo and Ti-Mo-Zr alloys10.1016/j.micron.2020.102992 ↗
17. Stability of the beta phase in Ti-Mo-Cr alloy fabricated by powder metallurgy10.2298/JMMB121024030S ↗
18. Composition design of a novel Ti-6Mo-3.5 Cr-1Zr alloy with high-strength and ultrahigh-ductility10.1016/j.jmst.2022.03.040 ↗
19. Influence of stress-induced α’’phase transformation on mechanical properties in metastable β type Ti-5Al-2.5Cr-5Mo-1Sn alloy10.1016/j.jallcom.2022.165563 ↗
20. Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical β-titanium alloy10.1016/j.jmbbm.2014.11.013 ↗
21. Effect of molybdenum content on corrosion resistance and corrosion behavior of Ti-Mo titanium alloy in hydrochloric acid, Materials Today
22. Mechanical and electrochemical characterization of Ti–12Mo–5Zr alloy for biomedical application10.1016/j.jallcom.2011.05.090 ↗
23. A comparison of tensile properties and corrosion behavior of cast Ti–7.5 Mo with cp Ti, Ti–15Mo and Ti–6Al–4V alloys10.1016/j.jallcom.2007.10.054 ↗
24. Characterization of a new beta titanium alloy, Ti–12Mo–3Nb, for biomedical applications10.1016/j.jallcom.2011.11.035 ↗
25. Effects of Mo contents on the microstructure, properties and cytocompatibility of the microwave sintered porous Ti-Mo alloys10.1016/j.msec.2018.12.028 ↗
26. The effect of molybdenum content on the microstructural evolution and tensile properties of as-cast Ti-Mo alloys, Materials Today
27. Effect of ageing treatment on the deformation behaviour of Ti–50.9 at% Ni10.1016/j.actamat.2009.06.059 ↗
28. Microstructural characterisation and mechanical evaluation of Ti-15Mo manufactured by laser metal deposition10.1016/j.jallcom.2023.169553 ↗
29. Element segregation and α2 formation in primary α of a near-α Ti-alloy10.1016/j.matchar.2020.110327 ↗
30. The room temperature tensile deformation behavior of thermomechanically processed β-metastable Ti-Nb-Ta-Zr bio-alloy: the role of deformation-induced martensite10.1016/j.msea.2018.09.038 ↗
31. The effect of Zr addition on the microstructure evolution and mechanical properties of hot-rolled TiAlNbZr alloy10.1016/j.msea.2021.142114 ↗
32. Effects of Mo content on corrosion and tribocorrosion behaviours of Ti-Mo orthopaedic alloys fabricated by powder metallurgy10.1016/j.corsci.2020.108557 ↗
33. Microstructure evolution and corrosion behaviour of a high Mo containing α+ β titanium alloy for biomedical applications10.1016/j.jallcom.2022.165240 ↗
34. Effect of Mo on the phase stability and elastic mechanical properties of Ti–Mo random alloys from ab initio calculations
35. Study on bifurcation behavior and morphology of the secondary grain boundary α phase in TC18 titanium alloy10.1016/j.jallcom.2022.163622 ↗
36. Effect of molybdenum on structure, microstructure and mechanical properties of biomedical Ti-20Zr-Mo alloys10.1016/j.msec.2016.05.053 ↗
37. Thermomechanical treatments influence on the phase composition, microstructure, and selected mechanical properties of Ti–20Zr–Mo alloys system for biomedical applications10.1016/j.jallcom.2019.152108 ↗
38. Substitutional solution hardening10.1016/0001-6160(63)90213-X ↗
39. Bimorphic microstructure in Ti-6Al-4V alloy manipulated by spark plasma sintering and in-situ press forging10.1016/j.scriptamat.2020.10.035 ↗
40. Strength and fracture toughness of TC21 alloy with multi-level lamellar microstructure10.1016/j.msea.2018.10.056 ↗
41. Cryogenic tensile properties and deformation behavior of a superhigh strength metastable beta titanium alloy Ti–15Mo–2Al10.1016/j.msea.2021.141344 ↗
42. Compressive deformation of a metastable β titanium alloy undergoing a stress-induced martensitic transformation: the role of β grain size10.1016/j.msea.2020.139919 ↗
43. A significant increase in the hardness of nanotwinned titanium alloys prepared via the martensitic phase transformation10.1016/j.matlet.2019.126507 ↗
44. Deformation mechanisms in a β-quenched Ti-5321 alloy: In-situ investigation related to slip activity, orientation evolution and stress induced martensite10.1016/j.jmst.2021.09.051 ↗
45. Strain rate effects on tensile deformation behaviors of Ti-10V–2Fe-3Al alloy undergoing stress-induced martensitic transformation10.1016/j.msea.2017.10.057 ↗
46. Passivity breakdown, pit initiation and propagation of pits in metallic materials–review10.1016/j.corsci.2014.10.006 ↗
47. Experimental evidence of concurrent compositional and structural instabilities leading to ω precipitation in titanium–molybdenum alloys10.1016/j.actamat.2011.10.008 ↗
48. Effect of severe plastic deformation realized by rotary swaging on the mechanical properties and corrosion resistance of near-α-titanium alloy Ti-2.5Al-2.6Zr10.1016/j.jallcom.2019.01.268 ↗
49. Influence of concentrations of chloride ions on electrochemical corrosion behavior of titanium-zirconium-molybdenum alloy10.1016/j.jallcom.2017.03.025 ↗
50. Effects of phase selection and microsegregation on corrosion behaviors of Ti-Al-Mo alloys10.1016/j.corsci.2022.110232 ↗
51. Electrochemical stability and corrosion resistance of Ti–Mo alloys for biomedical applications10.1016/j.actbio.2008.07.010 ↗
52. Effect of Mo addition on the pitting resistance of TiMn alloys in Hanks’ solution10.1016/j.jallcom.2021.159582 ↗
53. On the electropolishing and anodic oxidation of Ti-15Mo alloy10.1016/j.electacta.2016.01.218 ↗
54. Microstructural evolution and electrochemical corrosion characteristics of Ti–Ni matrix composite in NaCl and HCl solutions10.1016/j.ceramint.2024.01.431 ↗