journal article·2024-10

Temperature effect on the microstructural refinement of equiatomic CoCrNi medium entropy alloy via cyclically multi-directional impact

Xiangxiang Tu, Jianjun Wang, Hongxu Guo, Dan Zhao, Zhiming Jiao, Shengguo Ma, Ruifeng Wang, Qiang Wang, Zhihua Wang

Publisher page

Abstract

Severe plastic deformation can effectively refine alloy microstructure and improve the mechanical properties of alloys surprisingly. In this work, a new approach of severe plastic deformation was proposed based on split Hopkinson pressure bar, i.e., cyclically multi-directional impact. Using this newly developed technique for microstructural refinement at different temperatures (77 K, 293 K, and 1073 K), bulk equiatomic CoCrNi medium entropy alloys with refined microstructures were obtained, and the stress vs. strain relation of the equiatomic CoCrNi medium entropy alloy during the cyclically multi-directional impact can be in situ measured. The strain rate of the cyclically multi-directional impact was controlled at about 1500 /s. The hardnesses of the CoCrNi medium entropy alloy increase dramatically from 216 Hv to 460 Hv after the cyclically multi-directional impact at 77 K, 484 Hv after the cyclically multi-directional impact at 293 K, and 434 Hv after the cyclically multi-directional impact at 1073 K. The microstructural evolutions of the CoCrNi MEA after cyclically multi-directional impact at three temperatures were characterized and analyzed. This study aims to provide a new approach to microstructural refinement for bulk alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. High entropy alloys: A focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
4. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
5. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
6. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
7. Non-equiatomic high entropy alloys: approach towards rapid alloy screening and property-oriented design10.1016/j.msea.2015.09.010 ↗
8. Multicomponent high-entropy Cantor alloys10.1016/j.pmatsci.2020.100754 ↗
9. On the formation of disordered solid solutions in multi-component alloys10.1016/j.jallcom.2013.10.133 ↗
10. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
11. A review on microstructures, mechanical properties and processing of high entropy alloys reinforced composite materials10.1016/j.jallcom.2023.172732 ↗
12. Nano-structuring of a high entropy alloy by severe plastic deformation: experiments and crystal plasticity simulations10.1016/j.actamat.2023.118814 ↗
13. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
14. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
15. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
16. Multiple deformation scheme in direct energy deposited CoCrNi medium entropy alloy at 210K10.1016/j.msea.2021.142059 ↗
17. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
18. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
19. Towards strength-ductility synergy in a CrCoNi solid solution alloy via nanotwins10.1016/j.msea.2021.141298 ↗
20. Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae10.1038/s41467-019-08460-2 ↗
21. Ultra-strong tungsten refractory high-entropy alloy via stepwise controllable coherent nanoprecipitations10.1038/s41467-023-38531-4 ↗
22. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
23. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
24. Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength10.1073/pnas.1807817115 ↗
25. Nanoscale structural refinement via deformation twinning in face-centered cubic metals10.1016/j.scriptamat.2009.02.008 ↗
26. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
27. Twenty years of the CoCrFeNiMn high-entropy alloy: achieving exceptional mechanical properties through microstructure engineering10.1016/j.jmrt.2023.01.181 ↗
28. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
29. Using Severe Plastic Deformation to Produce Nanostructured Materials with Superior Properties10.1146/annurev-matsci-081720-123248 ↗
30. Enhancing the mechanical properties of high-entropy alloys through severe plastic deformation: a review
31. Structural evolutions of metallic materials processed by severe plastic deformation10.1016/j.mser.2018.06.001 ↗
32. Tailoring mechanical properties of a CoCrNi medium-entropy alloy by controlling nanotwin-HCP lamellae and annealing twins10.1016/j.msea.2018.11.143 ↗
33. Principles of ECAP–Conform as a continuous process for achieving grain refinement: application to an aluminum alloy10.1016/j.actamat.2009.10.044 ↗
34. Continuous high strength aluminum bolt manufacturing by the spring-loaded ECAP system10.1016/j.jmatprotec.2011.11.010 ↗
35. Ultra-high tensile strength nanocrystalline CoCrNi equi-atomic medium entropy alloy processed by high-pressure torsion10.1016/j.msea.2018.08.079 ↗
36. The use of severe plastic deformation for microstructural control10.1016/S0921-5093(01)01288-6 ↗
37. Equivalent strain distribution at high pressure torsion extrusion of pure copper: finite element modeling and experimental validation10.1016/j.jmatprotec.2023.117932 ↗
38. Cryoforged nanotwinned CoCrNi medium-entropy alloy with exceptional fatigue property at cryogenic temperature10.1016/j.scriptamat.2023.115718 ↗
39. Tribological and mechanical investigation of multi-directional forged nickel10.1038/s41598-018-36584-w ↗
40. Structure uniformity and limits of grain refinement of high purity aluminum during multi-directional forging process at room temperature10.1016/S1003-6326(14)63192-7 ↗
41. Direct measurement of isothermal flow stress of metals at elevated temperatures and high strain rates with application to Ta and TaW alloys10.1016/S1359-6454(96)00243-1 ↗
42. The third-type of strain aging and the constitutive modeling of a Q235B steel over a wide range of temperatures and strain rates10.1016/j.ijplas.2014.08.017 ↗
43. Revealing the microstructural evolution and mechanism during the thermomechanical treatment of polycrystalline CrCoNi medium-entropy alloy10.1016/j.jallcom.2021.159518 ↗
44. Hot Deformation and Dynamic Recrystallization Behavior of CoCrNi and (CoCrNi)94Ti3Al3 Medium Entropy Alloys10.3390/met10101341 ↗
45. Mechanism of grain refinement in an equiatomic medium-entropy alloy CrCoNi during hot deformation10.1016/j.jallcom.2019.152382 ↗
46. Dynamic tensile behavior of Al0.1CoCrFeNi high entropy alloy: Experiments, microstructure and modeling over a wide range of strain rates and temperatures10.1016/j.msea.2022.144275 ↗
47. Comprehensive study of strain hardening behavior of CrCoNi medium-entropy alloy10.1016/j.jallcom.2021.160623 ↗
48. Deformation twinning and detwinning in face-centered cubic metallic materials10.1002/adem.201900479 ↗
49. Dual mechanisms of grain refinement in a FeCoCrNi high-entropy alloy processed by high-pressure torsion
50. High resolution transmission electron microscope observation of zero-strain deformation twinning mechanisms in Ag10.1103/PhysRevLett.106.175504 ↗
51. Ultra-fine grain structures in aluminium alloys by severe deformation processing10.1016/j.msea.2003.10.170 ↗
52. Examining the pathways for deformation band formation at the mesoscale10.1016/j.matchar.2021.111552 ↗
53. Temperature dependence of the deformation behavior and mechanical response of CoCrNi medium-entropy alloy: experiment and simulation10.1016/j.jmrt.2023.05.173 ↗
54. Some geometrical relations in dislocated crystals10.1016/0001-6160(53)90054-6 ↗
55. Strong yet ductile eutectic high-entropy FCC/Laves composite fabricated by powder plasma arc additive manufacturing: mechanical property, microstructure evolution, and constitutive description over a wide range of temperatures and strain rates10.1016/j.jmrt.2023.12.166 ↗
56. Non-equivalence contribution of geometrically necessary dislocation and statistically stored dislocation in work-hardened metals10.1016/j.msea.2022.142728 ↗
57. Nucleation and thickening of shear bands in nano-scale twin/matrix lamellae of a Cu–Al alloy processed by dynamic plastic deformation10.1016/j.actamat.2010.01.049 ↗
58. Nanotwinning-assisted dynamic recrystallization at high strains and strain rates10.1038/s41563-022-01250-0 ↗
59. The role of stacking faults and twin boundaries in grain refinement of a Cu–Zn alloy processed by high-pressure torsion10.1016/j.msea.2010.04.036 ↗
60. Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment10.1016/S1359-6454(02)00594-3 ↗
61. Deformation substructure development in AlXCoCrFeNi (X = 0, 0.3) high entropy alloy under different influencing factors10.1016/j.jallcom.2021.162196 ↗
62. Role of twinning on dynamic recrystallization and microstructure during moderate to high strain rate hot deformation of a Ti-modified austenitic stainless steel10.1007/s11661-011-1012-5 ↗
63. B.B. Rath, Formation of annealing twins in f.c.c. crystals10.1016/S1359-6454(96)00336-9 ↗
64. The formation of annealing twins10.1007/BF03399157 ↗
65. Twinning and dynamic recrystallization behaviors during inchoate deformation of pre-twinned AZ31 Mg alloy sheet at elevated temperatures10.1016/j.jallcom.2022.165495 ↗
66. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
67. Continuous dynamic recrystallization in an Al–Li–Mg–Sc alloy during equal-channel angular extrusion10.1016/j.msea.2005.01.053 ↗
68. Strengthening face centered cubic crystals by annealing induced nano-twins10.1038/s41598-017-17848-3 ↗
69. Effects of strain rates and twins evolution on dynamic recrystallization mechanisms of austenite stainless steel10.1016/j.msea.2019.138044 ↗
70. Effect of strain rate on microstructure evolution of a fine-grained γ + γ' Ni-Co-base superalloy during superplasticity10.1016/j.matchar.2023.113112 ↗
71. Microstructure evolution of high-temperature deformation behavior of nickel based alloys for advanced ultra-supercritical applications10.1016/j.matchemphys.2023.128862 ↗
72. Evolution of twins and sub-boundaries at the early stage of dynamic recrystallization in a Ni-30%Fe austenitic model alloy10.1016/j.msea.2018.07.071 ↗
73. Dynamically compressive behaviors and plastic mechanisms of a CrCoNi medium entropy alloy at various temperatures10.1007/s10409-022-09003-w ↗
74. Stacking fault driven phase transformation in CrCoNi medium entropy alloy10.1021/acs.nanolett.0c04244 ↗
75. Dynamic deformation behavior and microstructure evolution of CoCrNiMox medium entropy alloys10.1016/j.msea.2021.142048 ↗
76. Comparison of dislocation density, twin fault probability, and stacking fault energy between CrCoNi and CrCoNiFe medium entropy alloys deformed at 293 and 140K10.1016/j.msea.2020.139224 ↗
77. Strong and ductile CrCoNi medium-entropy alloy via dispersed heterostructure10.1016/j.matdes.2023.111593 ↗
78. Impact tension behavior of heavy-drawn nanocrystalline CoCrNi medium entropy alloy wire10.1016/j.msea.2022.144041 ↗
79. The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy10.1016/j.actamat.2017.04.033 ↗
80. Using high-pressure torsion for metal processing: Fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
81. Thickness inhomogeneity in hardness and microstructure of copper after the compressive stage in high-pressure torsion10.1007/s12540-015-1002-z ↗
82. Revisiting stacking fault energy of steels10.1007/s11661-015-3266-9 ↗
83. Microstructural evolution and mechanical properties of Cu–Al alloys subjected to equal channel angular pressing10.1016/j.actamat.2008.12.002 ↗
84. Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy10.1016/j.scriptamat.2015.05.041 ↗
85. Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate10.1016/j.actamat.2010.05.049 ↗
86. Ultrafine grain refinement of biomedical Co-29Cr-6Mo alloy during conventional hot-compression deformation10.1007/s11661-009-9879-0 ↗
87. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
88. Effect of the Zener–Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation10.1016/j.actamat.2008.10.021 ↗
89. Significance of stacking fault energy in bulk nanostructured materials: insights from Cu and its binary alloys as model systems10.1016/j.pmatsci.2018.11.001 ↗
90. Hierarchical precipitates facilitate the excellent strength-ductility synergy in a CoCrNi-based medium-entropy alloy10.1016/j.msea.2023.145036 ↗
91. Variation of hardness of metals with grain size10.1038/173948b0 ↗
92. A novel (CoFeNi)82Ti5Al5V8 medium entropy alloy showing an ultra yield strength and a good ductility by L12 nanoparticles strengthening and dislocation strengthening10.1016/j.msea.2024.146138 ↗
93. G.I. Taylor, The mechanism of plastic deformation of crystals. Part I.—Theoretical
94. Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures10.1016/j.ijplas.2019.07.017 ↗
95. Measurement of particle sizes in opaque bodies10.1007/BF03398971 ↗
96. Synergetic strengthening and deformation mechanisms in gradient Al0.1CoCrFeNi high-entropy alloy10.1016/j.msea.2021.142165 ↗
97. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
98. Study of microstructural evolution, mechanical properties and plastic deformation behavior of Mg-Gd-Y-Zn-Zr alloy prepared by high-pressure torsion10.1016/j.msea.2023.145953 ↗
99. Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures10.1016/j.actamat.2018.02.016 ↗
100. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy