journal article·2024-10

Improved slag resistance of ferrotitanium slag based Al2O3-SiC-C castables: The effect of reaction between SiC and TiO2

Tu Long, Xifei Zhang, Ding Chen, Huazhi Gu, Meijie Zhang, Ao Huang, Lvping Fu, Yongshun Zou, Libei Li, Wendong Qiu

Publisher page

Abstract

Ferrotitanium slag is a kind of waste slag produced by smelting ferrotitanium alloy. It has high refractoriness (>1790 ℃) and Al 2O 3 content (≥70 wt%), which can be used to replace bauxite to prepare Al 2O 3-SiC-C castables. However, excessive substitution will lead to the decrease of slag resistance of Al 2O 3-SiC-C castables because of impurities in the ferrotitanium slag. In this paper, the slag resistance of ferrotitanium slag based Al 2O 3-SiC-C castables was improved by increasing the SiC content. The results showed that the castables with 13 wt% SiC had good mechanical properties. Increasing the amount of SiC was beneficial to improve the slag resistance. SiC content increased from 5 wt% to 22 wt%, the erosion index of dynamic slag resistance decreased from 17.05 % to 11.18 %. During the dynamic slag resistance, the TiO 2 in the ferrotitanium slag dissolved in the slag, then the SiC reacted with TiO 2 in the slag to form TiC coating on the surface of SiC particles. SiC particles wrapped by TiC widely existed in the reaction layer, which prevented further erosion of the slag. Further, the reaction of SiC with TiO 2 to consume TiO 2 and generate SiO 2 increased the viscosity of the slag in the reaction layer, thus hindering slag penetration.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Ceramic composites based on in situ calcium hexaaluminate/aluminum titanate prepared from ferrotitanate slag
2. Formation mechanism of the TiN containing coating on the Al2O3-Ti2O3 composite at 1400° C nitrogen-blowing10.1016/j.ceramint.2022.12.189 ↗
3. Aluminothermic studies of a liquid partial reduced ilmenite10.1016/j.mineng.2007.08.010 ↗
4. Preparation and synthesis thermokinetics of novel Al-Ti-C-La composite master alloys10.1016/j.jallcom.2018.10.241 ↗
5. Effect of firing temperature on properties of titanium-based aluminate cement
6. Composition and properties of the main types of aluminothermic slag at the Klyuchi Ferroalloy Works10.1007/s11148-006-0104-z ↗
7. Enhanced thermal shock resistance of ZrO2-reinforced Al2O3–CaAl12O19 composites prepared from ferrotitanium slag: crack propagation resistance mechanisms10.1016/j.ceramint.2021.02.033 ↗
8. Sintering properties and microstructure of Al2O3-TiO2-CaO composite materials based on ferrotitanium slag10.1016/j.ceramint.2023.09.157 ↗
9. Evaluation of remelting low-fluxing ferrotitanium slag as a potential refractory raw material: thermal characteristics and stability10.1016/j.ceramint.2021.12.339 ↗
10. Research on microwave roasting of high titanium slag process
11. Achieving high strength and low thermal conductivity: additive manufacturing of mullite lightweight refractory10.1016/j.ceramint.2024.05.084 ↗
12. Additive manufacturing of novel lightweight insulation refractory with hierarchical pore structures by direct ink writing10.1016/j.ceramint.2024.01.047 ↗
13. Hydration of alumina cement containing ferrotitanium slag with polycarboxylate-ethers (PCE) additives10.1063/1.4937868 ↗
14. Preparation and characterization of alumina/calcium-hexaluminate ceramic composites from ferrotitanium slag10.1016/j.jeurceramsoc.2020.05.004 ↗
15. Fundamental research on the densification of alumina ceramics by ferrotitanium slag10.1007/s40831-021-00480-x ↗
16. Effects of ferrotitanium slag addition on properties of Al2O3-SiC-C iron though castable
17. Effect of SiO2 fume addition on sintering properties of calcium alumino-titanate
18. Preparation and characterization of low-cost refractories for aluminum-melting-furnace linings from ferrotitanium slag10.1016/j.ceramint.2022.06.035 ↗
19. Application of calcium alumino-titanate to taphole clay10.1007/s42243-021-00664-5 ↗
20. Effect of partial substitution of calcium alumino-titanate for bauxite on the microstructure and properties of bauxite-SiC composite refractories10.1016/j.ceramint.2017.11.045 ↗
21. Properties and corrosion mechanism of Al2O3–SiC–C refractories for hot metal ladle with high FeOx: Effect of in-situ MgAl2O410.1016/j.ceramint.2024.03.012 ↗
22. A novel and effective approach to improve the oxidation resistance and slag corrosion resistance of Al2O3–SiC–C castables10.1016/j.ceramint.2024.03.328 ↗
23. Effect of pretreated Al-Si alloy powder on the microstructure and properties of Al2O3-SiC-C castables for iron runner10.1016/j.jallcom.2024.174138 ↗
24. Improving the anti-oxidation and water wettability of graphite through the design of coating structure for the preparation of Al2O3–SiC–C castables10.1016/j.ceramint.2023.06.186 ↗
25. Silica sol modified phenolic resin and its effect on mechanical properties of Al2O3-SiC-C bricks10.1016/j.jeurceramsoc.2023.07.022 ↗
26. Improved slag corrosion resistance of MgO–C refractories with calcium magnesium aluminate aggregate and silicon carbide: corrosion behavior and thermodynamic simulation10.1016/j.jeurceramsoc.2023.08.033 ↗
27. Effects of Al–Si alloy powders on mechanical properties and slag resistance of unfired magnesia refractories: in air and carbon-embedded atmospheres10.1016/j.ceramint.2024.01.434 ↗
28. Controllable preparation and slag corrosion resistance of novel MgO–MgAl2O4–ZrO2 refractory10.1016/j.ceramint.2024.03.252 ↗
29. Improved slag resistance of taphole clay due to in situ formation of TiCN from ferrotitanium slag10.1016/j.ceramint.2021.05.082 ↗
30. Waterjet-guided laser processing of SiC/SiC ceramic matrix composites to obtain high cleanliness and low oxidation damage characteristics surfaces10.1016/j.surfcoat.2024.130791 ↗
31. A study on the thermal conductivity of proton irradiated CVD-SiC and sintered SiC, measured using a modified laser flash method with multi-step machining10.1016/j.jeurceramsoc.2024.04.001 ↗
32. Enhancing growth speed of 3C–SiC using solution growth method by a new low temperature Mn-based cosolvent10.1016/j.ceramint.2024.03.297 ↗
33. Preparation of compact ZrC-SiC ceramic matrix from thermoset precursors for C/C-ZrC-SiC composites with high mechanical properties10.1016/j.jeurceramsoc.2023.11.076 ↗
34. Corrosion and penetration behaviors of slag/steel on the corroded interfaces of Al2O3-C refractories: Role of Ti3AlC210.1016/j.corsci.2018.08.022 ↗
35. Effect of ferrotitanium slag on microstructure and properties of Al2O3-SiC-C castables for iron runner