Effect of dopant solubility and excess doping on the superconducting properties of doped Nb3Sn prepared by field assisted sintering technique
Source abstract
Abstract
The present work is focused on understanding the role of Ruthenium (Ru) and Yttrium (Y) on the superconducting properties of the A15 Nb3Sn intermetallic compound. Ru and Y shows different solubility limit within the Nb3Sn matrix. Ru and Y-doped Nb3Sn superconducting alloys were prepared through mechanical alloying (MA) route followed by sintering using Field Assisted Sintering Technique (FAST). Analysis by X-ray diffraction demonstrates a significant decrement in crystallite size up to 0.5 wt% for the Ru-doped Nb3Sn followed by a significant increment when doping level reaches 1 wt% Ru. This could be the combined effect of structural disorderliness and Ru dissolution within the Nb3Sn matrix. While a significant increase in the crystallite size is observed for 0.5 wt% Y-doped Nb3Sn and no further change up to 1 wt% Y. This change could be a result of limited solubility of Y within the Nb3Sn matrix. Meanwhile, excessive Y plays an important role in the formation of additional flux pinning centers. The critical current density (Jc) shows a significant increase for all the Y-doped Nb3Sn alloys by a factor of 29 % due to the formation of Y2O3 from the residual Y, which is assumed to serve as additional flux pinning center. The Y2O3 particles was also considered as a possible cause of pinning down of grain boundaries in addition to NbO leading to grain refinement through Zener pinning. Ru-doped Nb3Sn alloys also exhibit an increase in Jc compared to pristine Nb3Sn, but only in concentrations up to 0.5 wt% Ru. At higher applied field, even 1 wt% Ru shows slight increase in Jc than pristine Nb3Sn. Y-doped samples showed superior functional properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Superconducting Materials and Applications · Superconductivity in MgB2 and Alloys · Particle accelerators and beam dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. The upper critical field of filamentary Nb3Sn conductors10.1063/1.1890447 ↗
2. The use of Nb3Sn in fusion: lessons learned from the ITER production including options for management of performance degradation10.1088/1361-6668/ab7ec2 ↗
3. A review of the properties of Nb3Sn and their variation with A15 composition, morphology and strain state10.1088/0953-2048/19/8/R02 ↗
4. High critical current density in internally-oxidized Nb3Sn superconductors and its origin10.1016/j.scriptamat.2020.05.043 ↗
5. Effect of independent alloying of zirconium with bronze and niobium on superconducting properties of Nb3Sn in a Cu(Sn)/Nb system10.1016/j.scriptamat.2023.115466 ↗
6. Effect of Zn addition and Ti doping position on the diffusion reaction of internal tin Nb3Sn conductors10.1088/1361-6668/ab4632 ↗
7. A review and prospects for Nb3Sn superconductor development10.1088/1361-6668/aa7976 ↗
8. Ta, Ti and Hf effects on Nb3Sn high-field performance: temperature-dependent dopant occupancy and failure of Kramer extrapolation10.1088/1361-6668/ab4d9e ↗
9. Effect of ruthenium doping on superconductivity in Nb2PdS5
10. Flux pinning in Y- and Ag-doped MgB2,”10.4236/ampc.2015.510043 ↗
11. Experimental and thermodynamic assessment of the Nb-Ni-Y system10.1007/s11669-007-9243-2 ↗
12. “Nb (Niobium) Binary Alloy Phase Diagrams,”
13. Thermodynamic description of Sn-Y and Mg-Sn-Y systems10.1016/S1002-0721(14)60121-6 ↗
14. Mechanical alloying: a novel technique to synthesize advanced materials10.34133/2019/4219812 ↗
15. Preparation and superconducting properties of Nb3Sn by mechanical alloying10.1007/s10909-021-02608-5 ↗
16. Line profiles of neutron powder-diffraction peaks for structure refinement10.1107/S0365110X67000234 ↗
17. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
18. Fundamental origin of the large impact of strain on superconducting Nb 3 Sn10.1088/1361-6668/aad980 ↗
19. Effect of Nb orientation and deformation on the growth of Nb 3 Sn intermetallic superconductor by bronze technique10.1080/09500839.2015.1112045 ↗
20. Effect of wire diameter on structure and electrical properties of (Al + Al2O3)-sheathed MgB2 with Nb barrier10.1016/j.ceramint.2023.08.116 ↗
21. The effect of the size of NbTi filaments on interfacial reactions and the properties of InSn-based superconducting solder joints10.1016/j.matdes.2019.107836 ↗
22. Microstructures and superconducting properties of MgB2 bulk samples processed by ultra-high pressure-assisted sintering10.1016/j.jeurceramsoc.2022.09.008 ↗
23. Role of Ti on growth, morphology and microtexture evolution of A15-based V3Ga superconductor by bronze technique10.1016/j.matdes.2016.07.143 ↗
24. Effect of Zr on growth kinetics, microstructure and microtexture of Nb3Sn by bronze technique10.1016/j.jallcom.2022.168140 ↗
25. Insight into the effect of Ti-addition on diffusion-controlled growth and texture of Nb3Sn intermetallic superconductor phase10.1016/j.mtla.2019.100276 ↗
26. Role of Zr on growth kinetics and microstructural evolution of the superconductor V3Ga by the bronze technique10.1080/09500839.2016.1274834 ↗
27. Effect of Ti concentration on the growth of Nb3Sn between solid Nb(Ti) and liquid Sn10.1007/s11664-013-2629-5 ↗
28. Ab initio theory of the impact of grain boundaries and substitutional defects on superconducting Nb3Sn10.1088/1361-6668/abc8ce ↗