Insights into the effects of La on the grain refinement and mechanical properties of Al-Ti-C intermediate alloy and pure Al: A first-principle study and experimental investigation
Source abstract
Abstract
This paper employs the self-propagating high-temperature synthesis (SHS) to prepare Al-Ti-C master alloys and explores the effects of integrating the rare earth element lanthanum to create Al-Ti-C-La composites. This research focuses on the microstructural changes in both the master alloy and pure aluminum, which aimed to elucidate the mechanisms that enhance grain refinement and resistance to grain refinement fading. The analysis reveals that when Al-Ti-C-La master alloys are incorporated into molten Al, the predominant structures formed include an Al matrix, rod-like Al 3Ti phases, and TiC particles, alongside AlLa phases and substantial Al 20Ti 2La compounds. The grain refining capability of Al-Ti-C-La master alloys is significantly exceeds that of the Al-Ti-C master alloys. The addition of La markedly reduces the settling of TiC particles, thereby granting the Al-Ti-C-La master alloys excellent resistance to grain refinement fading. The newly formed Al 20Ti 2 La phase plays a crucial role in refining the aluminum matrix, with metallic bond characteristics present on the side towards the Al matrix at the Al 20Ti 2 La/Al interface and distinct covalent bond characteristics on the Al 20Ti 2La side. Moreover, the Al 20Ti 2 La (110)/Al (110) interface exhibits the highest interfacial adhesion energy and stronger covalent bond features. Consequently, α-Al is prone to heterogeneously nucleate on the Al 20Ti 2La phase via the Al 20Ti 2La (110)/Al (110)-HCP orientation, which refines the grains of the aluminum matrix, ultimately enhancing the performance of aluminum-based alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Composition optimization and mechanical properties of Al-Zn-Mg-Si-Mn crossover alloys by orthogonal design10.1016/j.matchemphys.2023.128216 ↗
2. Influence of Cu/Mg ratio and content on heat-resistance of Al–Cu–Mg alloys.10.1016/j.jmrt.2024.01.178 ↗
3. Influence of carbon fiber failure mode caused by TiO2 coating on the high temperature tensile strength of carbon fiber reinforced 7075 Al alloy composites10.1016/j.jmrt.2023.08.191 ↗
4. A new synergy to overcome the strength-ductility trade-off dilemma in Al–Si–Cu alloy by micro-nano-particle complex clusters10.1016/j.matdes.2023.111973 ↗
5. X.Y. Chen, M.X. Guo, D.X. Qiao, L.K. Liu, K.C. Yu, L.Z. Zhuang. Simultaneously enhanced strength, ductility and formability of Al-Mg-Si-Cu-Zn-Fe-Mn alloy sheets by coupling distribution of solute, phases and grains. Materials Characterization. 209. pp: 113720. https://doi.org/10.1016/j.matchar.2024.113720.10.1016/j.matchar.2024.113720 ↗
6. Structural insights into T1 precipitation and age hardening by Zn alloying for T6 treated Al–Cu–Li based alloys with a high Cu/Li ratio.10.1016/j.jmrt.2024.03.197 ↗
7. Precipitation behavior and strengthening-toughening mechanism of additive friction stir-deposited Al–Mg–Si–Cu alloy
8. Design of novel Al-Mg-(Zn-Sc) alloys with enhanced mechanical properties and corrosion resistance10.1016/j.jallcom.2023.172425 ↗
9. Modification of eutectic Si in hypoeutectic Al-Si alloy with novel Al-3Ti-4.35La master alloy10.1016/j.jallcom.2022.167350 ↗
10. Microstructure characterization and mechanical properties of crack-free Al-Cu-Mg-Y alloy fabricated by laser powder bed fusion
11. Influence of Ti/C mass ratio on the microstructure of Al-Ti-C master alloy and refinement effect on pure aluminum10.1016/j.rinp.2021.104000 ↗
12. Characterization and corrosion behavior of Al-Co-rare earth (Ce-La) amorphous alloy10.1016/j.jre.2022.04.016 ↗
13. Effect of rare earth element Er on the microstructure and properties of highly alloyed Al-Zn-Mg-Cu-Zr-Ti alloy10.1016/j.jallcom.2023.170248 ↗
14. Effect of scandium on grain refinement mechanism and mechanical properties of Al-7Si-0.6 Mg alloy at different cooling rates10.1016/j.jmrt.2023.08.227 ↗
15. Effect of rare earth Y and Al-Ti-B master alloy on the microstructure and mechanical properties of 6063 aluminum alloy10.1016/j.jallcom.2020.154685 ↗
16. Achieving superior strength-ductility balance in novel heterogeneous lamella structures of Al-Zn-Mg-Cu alloys10.1016/j.jmst.2023.08.074 ↗
17. Control of surface micro-structure for Al alloy/polymer joining fabricated by laser process using Al-Ti-C powders: Effect of powder composition
18. Effect of Al-Ti-C master alloy addition on microstructures and mechanical properties of cast eutectic Al-Si-Fe-Cu alloy10.1016/j.matdes.2016.11.036 ↗
19. Grain refining efficiency and microstructure of Al-Ti-C-RE master alloy10.1016/j.jallcom.2010.08.047 ↗
20. Preparation and synthesis thermokinetics of novel Al-Ti-C-La composite master alloys10.1016/j.jallcom.2018.10.241 ↗
21. Y.X. Jin, E.L. Zhang, S.Y. Zeng. 2002. Self-propagating synthesis technology and in-situ autogenous composites. Haerbin. Harbin Institute of Technology Press.
22. Self-propagating high-temperature synthesis of porous graphene by magnesiothermic reaction as high-performance electrochemical electrode material10.1016/j.jallcom.2021.163552 ↗
23. Insights into arc-assisted self-propagating high temperature synthesis of TiB2-TiC ceramic coating via wire-arc deposition10.1016/j.jeurceramsoc.2020.05.005 ↗
24. Rapid fabrication of Al4SiC4 using a self-propagating high-temperature synthesis method10.1016/j.ceramint.2020.04.260 ↗
25. Heterogeneous nucleation mechanisms in Mg(0001)/Al3BC(0001) interfaces: Insights for advanced Mg-based composites
26. Effect of solute elements (Ni, Sn, P) on the adhesion electronic properties of γ-Fe/Cu heterogeneous interface: A first-principles study10.1016/j.rinp.2022.105659 ↗
27. Experimental and first-principle insight into Structural, optical and electrical properties and photocatalytic water purification application of Zn1-xMgxO10.1016/j.inoche.2024.112238 ↗
28. The enhanced superplasticity of a 2024 matrix nanocomposite reinforced by TiC particles10.1016/j.msea.2020.138926 ↗
29. Microstructure and formation mechanism of grain-refining particles in Al-Ti-C-RE grain refiners10.1016/S1002-0721(14)60455-5 ↗
30. First principles study on the influence of multi-element doping on the mechanical properties of θ/Al interface in Al-Cu alloy
31. Magnetism and half-metallicity in bulk and (100), (111)-surfaces of Co2ScSb full Heusler alloy for spintronic applications10.1016/j.vacuum.2019.108931 ↗
32. Phase relationships investigation of the Al-Ti-La ternary system10.1016/j.jallcom.2023.169800 ↗
33. First-principle calculations and experimental investigations of thermal barrier coating on (AlxY1-x)TaO4 ceramics10.1016/j.vacuum.2023.112427 ↗
34. First-principles calculation of elastic properties of Cu-Zn intermetallic compounds for improving the stiffness of aluminum alloys10.1016/j.commatsci.2019.109479 ↗
35. First-principles calculations on interface structure and fracture characteristic of TiC/TiZrC nano-multilayer film based on virtual crystal approximation10.1016/j.jallcom.2018.05.009 ↗
36. Periodic density functional theory (PDFT) simulating crystal structures with microporous CHA framework: an accuracy and efficiency study10.3390/inorganics11050215 ↗
37. Heterogeneous nucleation mechanisms in Mg(0001)/Al3BC(0001) interfaces: Insights for advanced Mg-based composites
38. First-principle calculations on the Al/ L12-Al3Zr heterogeneous nucleation interface10.1016/j.calphad.2020.101768 ↗
39. Density functional theory study of Al/NbB2 heterogeneous nucleation interface10.1016/j.apsusc.2018.06.076 ↗
40. X. Guo, J.T. Zhou, X.X. Zhang, P. Yang, J.Q. Ren, X.F. Lu. 2022. Effect of alloying elements on the interface of fcc-Fe/Ni3Al by first principle calculations. Computational Materials Science. 214. pp:111673. https://doi.org/10.1016/j.commatsci.2022.111673.10.1016/j.commatsci.2022.111673 ↗
41. First-principles investigation on the tensile strength, interfacial stability and electronic structure of the heterogeneous nucleation Al/VB2 interfaces