Broadening of the carbon window and the appearance of core-rim carbides in WC-Fe/Ni cemented carbides
Source abstract
Abstract
Among several separate challenges, the major one for replacing cobalt in cemented carbides is the difficulty to obtain alternative binder materials with a C-window broad enough to be robustly processed under conventional industrial control on the C content. The C-window is defined as the C content range for which phases that are detrimental to the mechanical properties are avoided. The present paper has two main objectives: first, to show that the processing C-window of Fe-Ni based systems is in fact wider than what thermodynamic equilibrium calculations predict, and that its width can be controlled moderately by tweaking the initial WC grain size and the cooling rate used in the material’s processing. Secondly, in case those detrimental phases are not avoided, this work gives insight on how to make their appearance less detrimental for the mechanical properties. The morphology, volume fraction and particle size distribution of the detrimental phases, specifically η6-carbides at low C contents, are investigated to explore desirable combination of hardness and toughness of alternative binder cemented carbides. During this study it was also discovered that in samples with carbon contents below the low-C limit of the C window a carbide with hexagonal lattice known as κ, not commonly seen in cemented carbides, appeared and formed the core of a core-rim structure together with the more common η6-phase. It is believed that the κ-carbide form due to local high concentrations of tungsten during solid state sintering and that it has an impact on the precipitation characteristics of the η6-phase.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Cemented carbide phase diagrams: a review10.1016/j.ijrmhm.2011.02.004 ↗
2. Effect of binder on sintering and microstructure of cemented carbides
3. Design of alternative binders for hard materials10.1016/j.ijrmhm.2019.105089 ↗
4. Characterization and properties of sintered WC–Co and WC–Ni–Fe hard metal alloys10.1016/j.jallcom.2013.09.188 ↗
5. Control of eta carbide formation in tungsten carbide powders sputter-coated with (Fe/Ni/Cr)10.1016/j.ijrmhm.2006.07.004 ↗
6. Novel binders for WC-based cemented carbides with high Cr contents10.1016/j.ijrmhm.2019.105063 ↗
7. European Chemical Agency. An agency of the European Union. echa.europa.eu. [Online] [Cited: 06 05, 2023.] 〈https://echa.europa.eu/substance-information/-/substanceinfo/100.028.325〉.
8. European Comission. Critical Raw Materials Resilience: Charting a Path towards greater Security and Sustainability. European Comission Website. [Online] 09 02, 2020. [Cited: 05 26, 2023.] 〈https://ec.europa.eu/docsroom/documents/42849〉. COM(2020) 474.
9. A new hardness model for materials design in cemented carbides10.1016/j.ijrmhm.2018.04.004 ↗
10. Mechanical behaviour of WC–11 wt% Co studied by bending tests, internal friction and electron microscopy.
11. Chapter 7: Process development and scale up of cemented carbide production. [book auth.] Maximilian Lackner
12. An assessment of the Fe-Ni-W-C phase diagram
13. Fundamental aspects of phase formation in WC-based cemented carbides containing FeMn-based binders10.1016/j.ijrmhm.2023.106411 ↗
14. Experimental investigation and thermodynamic assessment of the C–Co–Fe–Ni–W system10.1016/j.ijrmhm.2015.07.021 ↗
15. A study on WC-Ni cemented carbides: constitution, alloy compositions and properties, including corrosion behaviour10.1016/j.ijrmhm.2021.105750 ↗
16. Aspects of sintering of cemented carbides with Fe-based binders10.1016/j.ijrmhm.2014.07.028 ↗
17. Kaufman · 1970
18. Modelling the formation of detrimental phases in cemented carbides10.1016/j.matdes.2023.111823 ↗
19. Effect of Fe/Ni ratio on the microstructure and properties of WC-Fe-Ni-Co cemented carbides10.1016/j.ceramint.2017.10.148 ↗
20. WC grain growth and grain growth inhibition in nickel and iron binder hardmetals10.1016/S0263-4368(01)00070-1 ↗
21. Microstructure evolution in the cemented carbides WC–Co I. effect of the C/W ratio on the morphology and defects of the WC grains10.1002/1521-396X(200209)193:2<271::AID-PSSA271>3.0.CO;2-O ↗
22. Effect of carbon activity and powder particle size on WC grain coarsening during sintering of cemented carbides10.1016/j.ijrmhm.2013.10.004 ↗
23. Application of deep cryogenic treatment to uncoated tungsten carbide inserts in the turning of AISI 304 stainless steel10.1007/s11661-016-3767-1 ↗
24. Influence of deep cryogenic treatment on performance of cemented carbide (WC-Co) inserts during dry end milling of maraging steel10.1016/j.jmapro.2018.11.030 ↗
25. Effects of deep cryogenic treatment on microstructure and properties of WC–11Co cemented carbides with various carbon contents10.1016/S1003-6326(15)63929-2 ↗
26. A review on cryogenic treatment of tungsten carbide (WC-Co) tool material10.1080/10426914.2020.1843668 ↗
27. Thermo-Calc and DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
28. Thermo-Calc Software. TCFE Steels/Fe-alloys Database version 10. 〈https://thermocalc.com/products/databases/steel-and-fe-alloys/〉.
29. Thermo-Calc Software. MOBFE Steels/Fe-Alloys Mobility Database version 5. 〈https://thermocalc.com/products/databases/steel-and-fe-alloys/〉.
30. Modeling of precipitation kinetics in multicomponent systems: application to model superalloys10.1016/j.actamat.2015.08.041 ↗
31. Modeling precipitation kinetics in multicomponent alloys during deformation10.3389/fmats.2022.958472 ↗
32. Bemerkungen zur Schichtkristallbildung
33. The eta-carbides in the ternary system Fe-W-C at 1250 °10.1016/0025-5416(77)90209-9 ↗
34. The eta carbides in the Fe–W–C and Co–W–C systems.10.1007/BF02811752 ↗
35. First-principles study of structure, magnetic properties, and stability of η-Carbides (M,Fe)3W3C (M ¼ Ti, V, Cr, Mn,Co, and Ni)10.1002/pssb.201900108 ↗
36. Tungsten–cobalt–carbon system.
37. The structure of the Co3W9C410.1016/0001-6160(54)90037-1 ↗
38. X-ray diffraction study of a new phase in the Ni-W-C system10.1134/S0020168520060072 ↗
39. A neutron powder diffraction study of K-phase in the Fe-W-C system10.1016/0022-4596(83)90223-2 ↗
40. Density functional theory calculations of the stability and statistical disorder in crystals of the kappa phase of Me3+x W10–x C3+y (Me = Fe, Co, Ni)10.1134/S0036024420070080 ↗
41. The ternary system nickel-tungsten-carbon10.1515/ijmr-1975-660704 ↗
42. Overview of the quaternary system iron-nickel-tungsten-carbon10.1515/ijmr-1985-760301 ↗
43. The crystal chemistry of Kappa-Phases10.1016/0022-4596(87)90058-2 ↗
44. Effects of oxide addition on structure and properties of WC–10Co cemented carbide obtained by in situ synthesized powder10.1111/ijac.14058 ↗
45. Microstructure development during sintering and heat-treatment if cemented carbides and cermets10.1016/S0254-0584(00)00441-7 ↗
46. On the composition of Fe-Ni-Co-WC-Based cemented carbides10.1016/S0263-4368(96)00023-6 ↗
47. Prakash, L.J. Weiterentwicklung von Wolframcarbid Hartmetallen unter Verwendung von Eisen- Basis-Bindelegierungen. Karlsruhe: Kernforschungszentrum Karlsruhe., 1980. KfK 2984.
48. Morphology of η phase in cemented carbides with Fe-based binders influenced by carbon content and nitrogen atmosphere10.1016/j.ceramint.2019.07.063 ↗
49. Effect of a slight change in carbon content near the upper/lower limit on the microstructure and mechanical properties of WC-10Co cemented carbides10.1016/j.ijrmhm.2020.105465 ↗
50. Effect of the carbon content on the morphology evolution of the η phase in cemented carbides with the CoNiFeCr high entropy alloy binder10.1016/j.ijrmhm.2021.105731 ↗
51. The Measurement of Palmqvist Toughness for Hard and Brittle Materials
52. HV-KIC property charts of cemented carbides: a comprehensive data collection10.1016/j.ijrmhm.2021.105763 ↗