Role of (Al, Ti) alloying and annealing temperature in precipitation, recrystallization, and mechanical properties of ferrous multi-component alloys
Source abstract
Abstract
L1 2 -precipitate-strengthened multi-component alloys (MCAs) possess exceptional combination of strength and ductility. However, the high production costs of L1 2-containing MCAs impede their industrial application. This study introduces a novel approach for designing cost-effective L1 2-containing MCAs by microalloying Al and Ti with a base composition of Fe 50Ni 30Cr 20 (at%). Three types of MCAs were investigated in this study: Fe 50.13Ni 28.84Cr 18.56Al 1.39Ti 1.08 (1Ti alloy), Fe 46.53Ni 27.32Cr 19.91Al 3.44Ti 2.80 (3Ti alloy), and Fe 48.51Ni 25.93Cr 15.75Al 5.10Ti 4.71 (5Ti alloy) (at%). An increase in the (Al, Ti) content from 1 to 3 at% accelerates the formation of L1 2 particles, whereas an increase in the (Al, Ti) content from 3 to 5 at% leads to the activation of the brittle B2 and D0 24 phases. The rapid co-precipitation of the L1 2, B2, and D0 24 phases in the 5Ti alloys substantially hinders recrystallization during annealing, whereas the 3Ti alloys exhibit the highest rate of recrystallization upon annealing at 600 and 700 °C, mainly due to the reduction in the stacking fault energy of the matrix. The 5Ti alloys exhibit the highest hardness and the lowest plasticity owing to the presence of brittle B2 and D0 24 precipitates. By contrast, the 3Ti alloy annealed at 600 °C, in which dense and relatively fine L1 2 particles precipitated, exhibits a superior combination of hardness and plasticity. This study provides insights into the composition and annealing condition-dependent precipitation, recrystallization, and mechanical properties of ferrous MCAs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Resistance of CoCrFeMnNi high-entropy alloy to gaseous hydrogen embrittlement10.1016/j.scriptamat.2017.03.029 ↗
2. Hydrogen enhances strength and ductility of an equiatomic high-entropy alloy10.1038/s41598-017-10774-4 ↗
3. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
4. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
5. Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2018.03.040 ↗
6. Hierarchical precipitates, sequential deformation-induced phase transformation, and enhanced back stress strengthening of the micro-alloyed high entropy alloy10.1016/j.actamat.2022.117974 ↗
7. Recent progress in high entropy alloys10.3166/acsm.31.633-648 ↗
8. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
9. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
10. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
11. Crack-resistant σ/FCC interfaces in the Fe40Mn40Co10Cr10 high entropy alloy with the dispersed σ-phase10.1016/j.msea.2021.142039 ↗
12. Enhanced strength-ductility balance of the (CoCrFeNiMn) 95.2 Al3. 2Ti1. 6 high-entropy alloy by co-precipitation of the B2 and sigma phases10.1016/j.msea.2023.145039 ↗
13. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
14. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy10.1038/s41467-020-16085-z ↗
15. Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures10.1038/s41467-020-20109-z ↗
16. Strengthening of a CrMnFeCoNi high-entropy alloy by carbide precipitation10.1016/j.jallcom.2019.04.121 ↗
17. Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy10.1016/j.jallcom.2019.06.204 ↗
18. Overcoming the strength-ductility trade-off via the formation of nanoscale Cr-rich precipitates in an ultrafine-grained FCC CrFeNi medium entropy alloy matrix10.1016/j.msea.2019.138107 ↗
19. Heterogeneous grain size and enhanced hardness by precipitation of the BCC particles in medium entropy Fe–Ni–Cr alloys10.1016/j.jallcom.2022.167580 ↗
20. Anomalous precipitate-size-dependent ductility in multicomponent high-entropy alloys with dense nanoscale precipitates10.1016/j.actamat.2021.117480 ↗
21. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
22. Phase stability and magnetism of Ni 3 Al10.1103/PhysRevB.41.5010 ↗
23. Spin-polarization-induced structural selectivity in Pd 3 X and Pt 3 X (X= 3 d) compounds10.1103/PhysRevLett.75.1320 ↗
24. Site occupancy of alloying elements in γ′ phase of nickel-base single crystal superalloys10.1016/j.intermet.2020.106772 ↗
25. Guidelines for binary phase diagram assessment10.1007/BF02668229 ↗
26. Strengthening mechanisms in γ′ precipitating alloys10.1179/msc.1970.4.1.121 ↗
27. Mechanical behavior of Ni3Al: effects of environment, strain rate, temperature and boron doping10.1016/1359-6454(95)00331-2 ↗
28. Physical and mechanical metallurgy of Ni3Al and its alloys10.1179/imr.1989.34.1.153 ↗
29. Fracture in Ni3Al: environmental and dopant effects10.1002/1521-396X(199704)160:2<517::AID-PSSA517>3.0.CO;2-S ↗
30. High density of strong yet deformable intermetallic nanorods leads to an excellent room temperature strength-ductility combination in a high entropy alloy10.1016/j.actamat.2021.117234 ↗
31. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
32. Synergistic effect of Ti and Al on L12-phase design in CoCrFeNi-based high entropy alloys10.1016/j.intermet.2019.106476 ↗
33. Nanoprecipitate-strengthened high-entropy alloys10.1002/advs.202100870 ↗
34. Superior strength-ductility synergy in a novel tailored nanoparticles-strengthened medium-entropy alloy10.1016/j.scriptamat.2021.114278 ↗
35. Novel Co-free ferrous multicomponent alloys containing L12 particles with high density and heterogeneous distribution10.1016/j.scriptamat.2023.115812 ↗
36. Spinodal decomposition versus classical γ′ nucleation in a nickel-base superalloy powder: an in-situ neutron diffraction and atomic-scale analysis10.1016/j.actamat.2020.09.055 ↗
37. Spinodal decomposition mechanism of γ′ precipitation in a single crystal Ni-based superalloy10.1007/s11661-014-2506-8 ↗
38. Unraveling the two-stage precipitation mechanism in a hierarchical-structured fcc/L21 high-entropy alloy: experiments and analytical modeling10.1016/j.actamat.2023.119426 ↗
39. Al3 (Sc, Zr) precipitation in deformed Al-Mg-Mn-Sc-Zr alloy: effect of annealing temperature and dislocation density10.1016/j.jallcom.2020.154856 ↗
40. Interaction of recrystallization and precipitation: the effect of Al3Sc on the recrystallization behaviour of deformed aluminium10.1016/S1359-6454(03)00002-8 ↗
41. Thermal stability of a new Ni–Fe–Cr base alloy with different Ti/Al ratios10.1016/j.jmst.2014.07.008 ↗
42. Remarkable cryogenic strengthening and toughening in nano-coherent CoCrFeNiTi0. 2 high-entropy alloys via energetically-tuning polymorphous precipitates10.1016/j.msea.2022.143111 ↗
43. Transformation of DO24 η-Ni3Ti phase to face-centered cubic austenite during isothermal aging of an Fe–Ni–Ti alloy10.1016/j.actamat.2008.10.056 ↗
44. Bunge · 2013
45. Humphreys · 2012
46. Recovery, recrystallization and grain growth in ordered alloys10.1016/S0966-9795(00)00031-5 ↗
47. Formation of annealing twins in fcc crystals10.1016/S1359-6454(96)00336-9 ↗
48. Growth accidents induced by primary γ′ precipitates in a polycrystalline nickel-based superalloy10.1016/j.scriptamat.2020.05.020 ↗
49. Viewpoint on the formation and evolution of annealing twins during thermomechanical processing of FCC metals and alloys10.1007/s11661-020-05772-7 ↗
50. Interfacial nanophases stabilize nanotwins in high-entropy alloys10.1016/j.actamat.2019.12.010 ↗
51. Dislocation structures of Σ3 {112} twin boundaries in face centered cubic metals10.1063/1.3176979 ↗
52. Effect of stacking fault energy on the thickness and density of annealing twins in recrystallized FCC medium and high-entropy alloys10.1016/j.scriptamat.2023.115844 ↗
53. Simultaneous enhancement of strength and ductility via microband formation and nanotwinning in an L12-strengthened alloy
54. Designing nanoparticles-strengthened high-entropy alloys with simultaneously enhanced strength-ductility synergy at both room and elevated temperatures10.1016/j.actamat.2022.118216 ↗
55. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
56. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
57. Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques10.1557/JMR.1998.0146 ↗
58. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
59. Identifying slip systems around indentations in FCC metals10.1016/j.scriptamat.2003.08.021 ↗
60. Unraveling indentation-induced slip steps in austenitic stainless steel10.1016/j.matdes.2019.108169 ↗
61. Small-scale mechanical behavior of a eutectic high entropy alloy10.1038/s41598-020-59513-2 ↗