Microstructure and properties of Cu/Si composites for electronic packaging: Effect of tungsten layer on silicon particles
Source abstract
Abstract
Cu/Si composite are ideal electronic packaging materials, but the intense formation of Cu-Si intermetallics during preparation leads to a significant decrease in their plasticity and thermal conductivity . In this paper, a W layer was formed on Si particles using the sol-gel method, and Cu/Si composites were prepared by hot pressing. The results show that the maximum thickness of the W layer is 1.64 μm, and the minimum thickness is only 809 nm. The W layer acts as a diffusion barrier, effectively inhibiting the Cu-Si interfacial reaction and intermetallics formation, thus preventing the deterioration of matrix and reinforcement properties. Compared with the Cu/Si composite, the elongation of the Cu/Si@W composite improves from 0.2 % to 1.7 %, and the thermal conductivity increases by 7 times to 233.9 W/(m·K). Additionally, among the four samples, the Cu/Si@W composite has the lowest coefficient of thermal expansion (CTE). The W layer enhances the mechanical properties and thermal conductivity while reducing the CTE of Cu/Si composite for improved electronic packaging application.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Tong · 2011
2. Alloy development for highly conductive thermal management materials using copper-diamond composites fabricated by field assisted sintering technology10.1007/s10853-012-6868-2 ↗
3. Influence evaluation of tungsten content on microstructure and properties of Cu-W composite10.3390/met12101668 ↗
4. Fabrication of homogeneous Mo-Cu composites using spherical molybdenum powders prepared by thermal plasma spheroidization process10.1016/j.ijrmhm.2018.01.022 ↗
5. Numerical and experimental research on fluid fow, solidification, and bonding strength during the twin-roll casting of Cu/Invar/Cu clad strips10.1007/s11663-020-01854-4 ↗
6. Microstructure evolution, mechanical properties and tailoring of coefficient of thermal expansion for Cu/Mo/Cu clad sheets fabricated by hot rolling10.1016/S1003-6326(22)65948-X ↗
7. Metal-matrix composites for electronic packaging10.1007/BF03222270 ↗
8. Research progress in interface modification and thermal conduction behavior of diamond/metal composites10.1007/s12613-021-2339-6 ↗
9. Effects of graphene content on the microstructure and properties of copper matrix composites10.1016/j.carbon.2015.10.023 ↗
10. Microstructure and mechanical properties of graphene-reinforced copper matrix composites prepared by in-situ CVD, ball-milling, and spark plasma sintering10.1016/j.jallcom.2020.155182 ↗
11. Enhanced strength in bulk graphene–copper composites10.1002/pssa.201330051 ↗
12. Microstructure and thermal conductivity of Cu-B/diamond composites10.1177/0021998312460259 ↗
13. High thermal conductive copper/diamond composites: state of the art10.1007/s10853-020-05443-3 ↗
14. Thermo-physical and mechanical properties of high volume fraction SiCp/Cu composites prepared by pressureless infiltration10.1016/j.msea.2007.12.028 ↗
15. Survey on wetting of SiC by molten metals10.1016/j.ceramint.2010.01.001 ↗
16. The Effects of silicon carbide reinforcement on the properties of Cu/SiCp composites10.1007/s12633-014-9199-x ↗
17. Correlation of the mechanical properties of Cu/C composite materials with the chemistry of Cu-C interfacial zone10.1016/j.matchar.2021.111364 ↗
18. Thermal expansion and thermal conductivity of continuous carbonfibre reinforced copper matrix composites
19. Thermodynamics and kinetics of dissolutive wetting of Si by liquid Cu10.1016/j.actamat.2010.06.038 ↗
20. Cu-Si (copper-silicon)10.1007/s11669-012-0076-2 ↗
21. Fabrication of CuSiC metal matrix composites10.1007/s10853-005-2622-3 ↗
22. Effects of Al additive on the mechanical and physical properties of silicon reinforced copper matrix composites10.1016/S1359-6462(99)00216-X ↗
23. Research and development of metal matrix composites for electronic packaging
24. New insights into fracture of Si in Cu-filled through silicon via during and after thermal annealing10.1016/j.engfracmech.2020.107281 ↗
25. Copper matrix thermal conductive composites with low thermal expansion for electronic packaging10.1016/j.ceramint.2020.04.117 ↗
26. Advanced ceramic components: materials, fabrication, and applications10.1016/j.jiec.2020.02.002 ↗
27. Electrical conductivity of spark plasma sintered W-Cu and Mo-Cu composites for electrical contact applications
28. Mechanical and microstructural characterization of W-Cu FGM fabricated by one-step sintering method through PM route
29. Preparation of W-W2B composites from W-BN powders and properties of W-B-N barrier for copper metallization10.1016/j.ijrmhm.2017.12.007 ↗
30. Properties of reactively sputtered W–B–N thin film as a diffusion barrier for Cu metallization on Si10.1007/s00339-008-4961-9 ↗
31. Investigation on the diffusion barrier properties of sputtered Mo/W-N thin films in Cu interconnects10.1063/1.2800382 ↗
32. Introduction of control measures for powder aggregation
33. Spark plasma sintering of W-30Si refractory targets: microstructure, densification and mechanical properties
34. Phase evolution progress and properties of W-Si composites prepared by spark plasma sintering10.1016/j.jallcom.2018.07.038 ↗
35. Yoshinori · 2013
36. The study of refinement for primary silicon in Cu-50 wt%Si alloys10.1016/j.jallcom.2006.06.071 ↗
37. The mechanisms of phase transformation in diffusion couples of the Cu-Si system10.1016/0254-0584(94)01445-M ↗
38. RIR-measurement and use in quantitative XRD10.1017/S0885715600013257 ↗
39. Interface and mechanical/thermal properties of graphene/copper composite with Mo2C nanoparticles grown on graphene10.1016/j.compositesa.2018.03.014 ↗
40. Estimation of thermal conductivity of short fiber composites
41. The emergent behaviour of thermal networks and its impact on the thermal conductivity of heterogeneous materials and systems10.3390/jcs4010032 ↗
42. Calorimetric measurements and assessment of the binary Cu-Si and ternary Al-Cu-Si phase diagrams10.1016/j.calphad.2016.03.002 ↗
43. The structural effect of SiC form ceramic on the compressive strength and thermal expansion properties of Cu–SiC composites
44. Simultaneously improved modulus, thermal expansion coefficient and wear resistance of a Mg–6Zn–1Gd–0.3Ca matrix composite by adding high volume fraction SiC particles10.1016/j.jmrt.2023.08.143 ↗
45. Microstructure and properties of C/C–SiC composites prepared by reactive melt infiltration at low temperature in vacuum10.1016/j.ceramint.2019.11.195 ↗