Titanate-grafted carbon black-facilitated MPLs for advanced proton exchange membrane fuel cells
Source abstract
Abstract
This study introduces a novel hydrophobic modification for microporous layers (MPLs) in proton exchange membrane fuel cells (PEMFCs), utilizing a chemical grafting method with Titanate coupling agent NDZ-201 on carbon black. This method overcomes the drawbacks of traditional MPLs that use polytetrafluoroethylene (PTFE) and require high-temperature post-processing, which can lead to pore blockage. The treated carbon black exhibits outstanding hydrophobic properties, enhancing both water and gas flow through the cell, thereby significantly boosting its electrochemical capabilities. With an ideal carbon loading of 2 mg cm⁻² for MPL, the cell delivers an impressive peak power density of 1045.8 mW cm⁻². The treatment also increases the contact angle of the carbon black from 65° to 156°, achieving superhydrophobicity through covalent bonding with NDZ-201. This fluorine-free, covalent grafting approach presents a new method for the development of MPLs for PEMFCs, facilitating performance improvement and sustainability. The study highlights the significance of the intricate interplay among various factors, including chemical grafting for hydrophobicity, carbon loading and open pores, affecting fuel cell performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Durability challenges of anion exchange membrane fuel cells10.1039/D0EE01133A ↗
2. PGM-free cathode catalysts for PEM fuel cells: a mini-review on stability challenges10.1002/adma.201807615 ↗
3. Single atomic cerium sites with a high coordination number for efficient oxygen reduction in proton-exchange membrane fuel cells10.1021/acscatal.0c05503 ↗
4. Optimal warm-up control strategy of the PEMFC system on a city bus aimed at improving efficiency10.1016/j.ijhydene.2017.02.203 ↗
5. A review of polymer–nanocomposite electrolyte membranes for fuel cell application10.1016/j.jiec.2014.04.030 ↗
6. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
7. A concise guide to sustainable PEMFCs: recent advanliuyices in improving both oxygen reduction catalysts and proton exchange membranes10.1039/C5CS00302D ↗
8. Graphene oxide: a promising membrane material for fuel cells10.1016/j.rser.2017.09.081 ↗
9. 3D experimental visualization of water flooding in proton exchange membrane fuel cells10.1016/j.energy.2019.03.128 ↗
10. Understanding the gas diffusion layer in proton exchange membrane fuel cells. I. How its structural characteristics affect diffusion and performance10.1016/j.jpowsour.2013.09.090 ↗
11. Liquid water breakthrough pressure through gas diffusion layer of proton exchange membrane fuel cell10.1016/j.ijhydene.2014.03.238 ↗
12. Effects of microstructure characteristics of gas diffusion layer and microporous layer on the performance of PEMFC10.1016/j.enconman.2009.11.011 ↗
13. Numerical simulations of water droplet dynamics in hydrogen fuel cell gas channel10.1016/j.jpowsour.2013.08.032 ↗
14. A critical review on gas diffusion micro and macroporous layers degradations for improved membrane fuel cell durability10.1016/j.jpowsour.2016.10.037 ↗
15. A review of the gas diffusion layer in proton exchange membrane fuel cells: durability and degradation10.1016/j.apenergy.2015.06.068 ↗
16. A review of accelerated stress tests of MEA durability in PEM fuel cells10.1016/j.ijhydene.2008.10.012 ↗
17. Surface-initiated ring-opening metathesis polymerization of 5-(perfluorohexyl)norbornene on carbon paper electrodes10.1016/j.jcis.2010.07.044 ↗
18. Innovative perfluoropolyether-functionalized gas diffusion layers with enhanced performance in polymer electrolyte membrane fuel cells10.1002/fuce.201900169 ↗
19. A review of the microporous layer in proton exchange membrane fuel cells: materials and structural designs based on water transport mechanism10.1016/j.rser.2021.111998 ↗
20. Hydrophobically modified phosphogypsum and its application in polypropylene composites10.1016/j.conbuildmat.2022.128500 ↗
21. Effects of titanate treatment on morphology and mechanical properties of graphene nanoplatelets/high density polyethylene nanocomposites10.1002/app.42073 ↗
22. Surface modification of silica micro-powder by titanate coupling agent and its utilization in PVC based composite10.1016/j.conbuildmat.2021.124933 ↗
23. The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites10.1016/j.compositesb.2012.05.022 ↗
24. Glass fibre coating for optimum mechanical properties of vinyl ester composites10.1016/S1359-835X(97)00071-7 ↗
25. Influence of modified wood fibers on the mechanical properties of wood fiber-reinforced polyethylene10.1002/(SICI)1097-4628(19971121)66:8<1561::AID-APP17>3.0.CO;2-6 ↗
26. Synthesis and characterization of platinum nanoparticles on in situ grown carbon nanotubes based carbon paper for proton exchange membrane fuel cell cathode10.1016/j.jpowsour.2008.11.084 ↗
27. The investigation of the silica-reinforced rubber polymers with the methoxy type silane coupling agents10.3390/polym12123058 ↗
28. Functional and versatile superhydrophobic coatings via stoichiometric silanization10.1038/s41467-021-21219-y ↗
29. Hydrophobic modification of ZnO nanostructures surface using silane coupling agent10.1002/pc.22769 ↗
30. Preparation of KH570-SiO2 and their modification on the MF/PVA composite membrane10.1007/s12221-015-5284-z ↗
31. Incorporation of modified soy protein isolate as filier in BR/SBR blends10.1007/s10853-009-4176-2 ↗
32. Impact of titanate coupling agent on properties of high density polyethylene composite filled with coal gangue10.1002/sia.6805 ↗
33. Surface functionalization of coal powder with different coupling agents for potential applications in organic materials10.1016/j.apsusc.2014.06.115 ↗
34. Modification of the three-dimensional graphene aerogel self-assembled network using a titanate coupling agent and its thermal conductivity mechanism with epoxy composites10.1039/D1NR04075H ↗
35. Cotton pad derived 3D lithiophilic carbon host for robust Li metal anode: in-situ generated ionic conductive Li3N protective decoration10.1016/j.cej.2021.132722 ↗
36. Cotton pad-derived large-area 3D N-doped graphene-like full carbon cathode with an O-rich functional group for flexible all solid Zn–air batteries10.1039/D0TA00014K ↗
37. Controlled functionalization of carbon nanotubes as superhydrophobic material for adjustable oil/water separation10.1039/C4TA07173E ↗
38. Effects of microporous layers in polymer electrolyte fuel cells10.1149/1.1861194 ↗
39. Wettability and capillary behavior of fibrous gas diffusion media for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2009.04.052 ↗
40. Laboratory measurement of low permeability unconventional gas reservoir rocks: a review of experimental methods10.1016/j.jngse.2016.11.041 ↗
41. Gas diffusion layer durability under steady-state and freezing conditions10.1016/j.jpowsour.2006.09.092 ↗
42. Template-directed fabrication of porous gas diffusion layer for magnesium air batteries10.1016/j.jpowsour.2015.06.141 ↗
43. Gas permeability of catalyzed electrodes in polymer electrolyte membrane fuel cells10.1016/j.apenergy.2017.10.087 ↗
44. Characterization of gas diffusion layers for PEMFC10.1016/j.electacta.2008.02.057 ↗
45. Effect of microporous layer composed of carbon nanotube and acetylene black on polymer electrolyte membrane fuel cell performance10.1016/j.ijhydene.2014.10.146 ↗
46. Recent progress in the use of electrochemical impedance spectroscopy for the measurement, monitoring, diagnosis and optimization of proton exchange membrane fuel cell performance10.1016/j.jpowsour.2020.228361 ↗