journal article·2024-08

Investigation of the physico-chemical properties of In2S3 powder synthesized via solid-state reaction and In2S3 thin films prepared through thermal evaporation

E. Gnenna, N. Khemiri, M. Kanzari

Publisher page

Abstract

In this study, we examined the physico-chemical properties of In 2S 3 powder produced using the solid-state reaction and of the In 2S 3 thin film obtained using the thermal evaporation technique. Thermally evaporated In 2S 3 thin films were subjected to vacuum annealing to study the impact of heating on the structural, morphological and optical properties of the samples. According to the X-ray diffraction analysis, the microstructure of as-grown thin films were an amorphous in nature which transformed into polycrystalline structure after annealing at T≥250 °C. This polycrystalline structure suggests the formation of the β-In 2S 3 phase with a tetragonal and/or cubic crystal structure. In addition, the energy dispersive spectroscopy analysis revealed that all samples show a slight excess of indium and a deficit of sulfur, compared to the stoichiometric ratios. Moreover, surface micrographs recorded by atomic force microscopy showed an increase in surface roughness after annealing. Optically, the transmittance spectra, T(λ), illustrated a high transmittance average value,∼70 %, while the reflectance spectra, R(λ), showed an average value of 25 % in the visible and NIR region. It appeared that heat treatment had no significant impact on the T and R spectra. The optical dispersion parameters of the treated samples were also studied. The direct and indirect allowed bandgap transitions values of all samples were found to ranging from 1.75 to 2.48 eV and from 1.80 to 2.38 eV, respectively. Such observation shows that the bandgap increased with annealing temperature. Electrically, n-type conductivity for In 2S 3 films annealed at 250 °C was recorded.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Impact of thermal annealing inducing oxidation process on the crystalline powder of In2S310.1007/s10854-020-03921-7 ↗
2. Illumination and voltage effects on the forward and reverse bias current–voltage (I-V) characteristics in In/In2S3/p-Si photodiodes10.1007/s10854-021-06378-4 ↗
3. Growth of large-area two-dimensional non-layered β-In2S3 continuous thin films and application for photodetector device10.1007/s10854-020-04366-8 ↗
4. Asymmetric contact induced self-powered 2D In2S3 photodetector towards high-sensitivity and fast-response10.1039/D0NR00517G ↗
5. Ethanol sensing properties of sprayed β-In2S3 thin films10.1016/j.snb.2018.01.175 ↗
6. Tetragonal β-In2S3: partial ordering of In3+ vacancy and visible-light photocatalytic activities in both water and nitrate reduction10.1016/j.catcom.2016.09.029 ↗
7. β-In2S3 as water splitting photoanodes: promise and challenges10.1007/s13391-020-00266-5 ↗
8. Thickness-dependent optical properties and in-plane anisotropic Raman response of the 2D β -In2S3
9. Structure reinvestigation of α-, β- and γ-In2S3
10. Effect of different dopants on the structural and physical properties of In2S3 thin films: a review10.1007/s10853-023-08777-w ↗
11. Effect of annealing on the physical properties of thermally evaporated In2S3 thin films10.1016/j.cap.2018.11.016 ↗
12. Sulfurization-induced growth of single- crystalline high-mobility β-In2S3 films on InP10.1063/1.5000935 ↗
13. Effect of heat treatment in sulfur on structural, optical and electrical properties of thermally evaporated In2S3 thin films10.1016/j.solener.2021.04.057 ↗
14. Enhanced interface properties of solution-processed antimony sulfide planar solar cells with n-type indium sulfide buffer layer10.1016/j.electacta.2021.138031 ↗
15. Annealing and plasma treatment effect on structural, morphological and topographical properties of evaporated β-In2S3 films10.1088/2053-1591/ab6a5b ↗
16. Evidences for phase transition and metallization in β−In2S3 at high pressure10.1016/j.chemphys.2019.04.025 ↗
17. Deposition of β-In2S3 photosensitive thin films by ultrasonic spray pyrolysis
18. Methylene blue photocatalytic degradation under visible irradiation on In2S3 synthesized by chemical bath deposition
19. Substrate temperature effect on microstructure, oxygen adsorption and ethanol sensing response of sprayed In2S3 films
20. Experimental studies and new theoretical modeling on the properties of In2S3 thin films10.1016/j.optmat.2021.111238 ↗
21. Synthesis and physical behaviour of In2S3 films10.1016/j.apsusc.2008.02.032 ↗
22. Characterization of thermally evaporated In2S3 films for solar cell application
23. Structural analysis of co-evaporated In2S3 and In2S3:V for solar cell absorber applications
24. Effect of substrate nature on the structural, optical and electrical properties of In2S3 thin films
25. Growth studies and characterisation of In2S3 thin films deposited by atomic layer deposition (ALD)10.1016/j.apsusc.2003.08.011 ↗
26. Impact of substrate nature and film thickness on physical properties of antimony trisulphide (Sb2S3) thin films for multifunctional device applications10.1016/j.spmi.2020.106473 ↗
27. Impact of the annealing time on physical properties of sprayed In2S3 thin films10.1007/s10854-019-00920-1 ↗
28. Synthesis of In2S3 and Ga2S3 crystals for oxygen sensing and UV photodetection10.1016/j.sna.2016.05.003 ↗
29. Positive and negative photoconductivity in sprayed β-In2S3 thin films10.1088/2053-1591/ab51c7 ↗
30. Raman spectroscopic study of In2S3 films prepared by spray pyrolysis10.1016/j.mssp.2013.10.007 ↗
31. α-In2S3 and β-In2S3 phases produced by SILAR technique10.1080/14786435.2012.657708 ↗
32. Optimised In2S3 thin films deposited by spray pyrolysis
33. On the conversion of amorphous In2S3 thin films to polycrystalline In2S3 and to In2O3 through thermal oxidation process10.1016/j.mssp.2020.104983 ↗
34. Investigation of the effect of S/In molar ratio on physical properties of sprayed In2S3 thin films10.1039/D0RA02945A ↗
35. Fabrication of visible light photodetector using co-evaporated Indium Sulfide thin films10.1007/s10854-019-02152-9 ↗
36. Annealed In2S3 thin films prepared by spray technique: report on the structural, optical and dispersion energy parameters10.1142/S0218625X18502232 ↗
37. Nalwa · 2002
38. Optical constants, dispersion parameters and non-linearity of different thickness of As40S45Se15 thin films for optoelectronic applications10.1016/j.ijleo.2019.04.097 ↗
39. Optical properties of polylactides10.1007/s10924-006-0001-z ↗
40. Effect of Substrate temperature on structural and optical properties of In2S3 thin films grown by Thermal evaporation10.1016/j.matpr.2017.10.049 ↗
41. Penn model and Wemple-DiDomenico single oscillator analysis of cobalt sulfide nanoparticles10.1063/1.4982117 ↗
42. Refractive index of different perovskite materials10.1557/s43578-021-00257-8 ↗
43. Photo-sensing properties of Cd-doped In2S3 thin films fabricated via low-cost nebulizer spray pyrolysis technique10.1007/s10854-022-08766-w ↗
44. Structural and optical properties of In2S3 thin films deposited by sulfurization assisted thermal evaporation method10.1016/j.matpr.2020.07.708 ↗
45. Optical properties of thermally evaporated In2S3 thin films measured using photoacoustic spectroscopy10.1016/j.mssp.2017.09.009 ↗
46. Growth of stoichiometric indium sulfide films by thermal evaporation: Influence of vacuum annealing on structural and physical properties10.1016/j.tsf.2012.09.070 ↗
47. Effect of film thickness on physical properties of RF sputtered In2S3 layers10.1016/j.surfcoat.2015.06.011 ↗
48. Characterisation and Wemple-Didomenico model of indium sulphide thin layers for photovoltaic applications
49. Solid solutions of M2-2xIn2xS3 (M = Bi or Sb) by solventless thermolysis10.1039/C9TC00148D ↗
50. Annealing effect on the physical properties of evaporated In2S3 films10.1016/j.solmat.2010.02.044 ↗
51. Electrical investigation of sprayed In2S3 film10.1016/j.mssp.2020.105294 ↗