Fe2AlB2@FeAl layered double hydroxides with core-shell heterostructures for electromagnetic wave absorption
Source abstract
Abstract
The rapid development of high-performance materials has garnered considerable attention in addressing electromagnetic pollution. The construction of core-shell heterostructures is an effective approach for regulating the electromagnetic parameters of absorbers. However, these heterostructures usually lack a direct channel for charge transport between the core phase and the adhesive shell phase. Herein, Fe 2AlB 2 @FeAl-layered double hydroxides with core-shell heterostructures were prepared using a top-down approach. The tightly connected FeAl-LDHs nanosheets to the Fe 2AlB 2 parent phase improved electronic transport. Compared with raw Fe 2AlB 2, the spherical absorber with an embroidered structure demonstrated stronger reflection loss (-15.6 dB for Fe 2AlB 2, −58.6 dB for Fe 2AlB 2@FeAl-LDHs) and a broader effective absorption bandwidth (2.2 GHz for Fe 2AlB 2, 3.6 GHz for Fe 2AlB 2 @FeAl-LDHs) due to the enhanced dielectric and magnetic losses. This study presents a practical method for designing new controllable core-shell heterostructures for electromagnetic wave-absorbing materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Dimensional design and core–shell engineering of nanomaterials for electromagnetic wave absorption10.1002/adma.202107538 ↗
2. Tailoring self-polarization of bimetallic organic frameworks with multiple polar units toward high-performance consecutive multi-band electromagnetic wave absorption at gigahertz10.1002/adfm.202201129 ↗
3. Microstructure-based high-quality factor terahertz metamaterial bio-detection sensor10.1007/s42114-023-00679-4 ↗
4. Progress in percolative composites with negative permittivity for applications in electromagnetic interference shielding and capacitors10.1007/s42114-023-00778-2 ↗
5. Recent advances in non-biomass and biomass-based electromagnetic shielding materials10.1007/s42114-023-00774-6 ↗
6. Advances in microwave absorbing materials with broad-bandwidth response10.1007/s12274-023-5654-6 ↗
7. Building the conformal protection of VB-group VS2 laminated heterostructure based on biomass-derived carbon for excellent broadband electromagnetic waves absorption
8. Regulating the electronic structure of MAX phases based on rare earth element Sc to enhance electromagnetic wave absorption10.1021/acsnano.3c11585 ↗
9. FeNi LDH/Loofah sponge-derived magnetic FeNi alloy nanosheet array/porous carbon hybrids with efficient electromagnetic wave absorption10.1021/acs.iecr.2c01051 ↗
10. Progress in structural tailoring and properties of ternary layered ceramics10.15541/jim20230123 ↗
11. MAB-Phases and Beyond-a tribological success story?10.1002/admi.202200869 ↗
12. Trends in the behavior of point defects in MB and MAB phases10.1021/acs.chemmater.2c01291 ↗
13. Fe2AlB2: a novel ferromagnetic material with superior electromagnetic wave absorption performance10.1016/j.ceramint.2023.08.128 ↗
14. Electromagnetic wave absorbing properties of Cr2AlB2 powders and the effect of high-temperature oxidation10.1111/jace.17601 ↗
15. Ternary borides Cr3AlB4: a novel material of layered structure for efficient broadband microwave-absorption10.1016/j.ceramint.2023.09.031 ↗
16. High-performance microwave absorption materials: theory, fabrication, and functionalization10.1021/acs.iecr.3c02150 ↗
17. Construction of strong coupling interface between CoZn@NC and CuS for ultrathin electromagnetic wave absorption
18. Two-dimensional CoNi@mesoporous carbon composite with heterogeneous structure toward broadband microwave absorber10.1007/s12274-022-4617-7 ↗
19. Interface engineering to regulate hollow one-dimensional N-doped Carbon@ZnO nanocomposite for boosting electromagnetic wave absorption10.1016/j.colsurfa.2022.130156 ↗
20. Multi-interfacial 1D magnetic ferrite@C fibers for broadband microwave absorption
21. Interfacial polarization dominant CNTs/PyC hollow microspheres as a lightweight electromagnetic wave absorbing material10.1016/j.carbon.2022.03.016 ↗
22. Controllable heterogeneous interfaces and dielectric regulation of hollow raspberry-shaped Fe3O4@rGO hybrids for high-performance electromagnetic wave absorption10.1016/j.jmst.2022.12.018 ↗
23. Novel scale-like structures of graphite/TiC/Ti3C2 hybrids for electromagnetic absorption10.1002/aelm.201700617 ↗
24. Electromagnetic microwave absorption theory and recent achievements in microwave absorbers10.1016/j.carbon.2020.07.028 ↗
25. Current advances and future perspectives of MXene-based electromagnetic interference shielding materials10.1007/s42114-023-00752-y ↗
26. Submicron carbonyl iron particles as an efficient microwave absorber in the low frequency band
27. Promoting the photogeneration of hydrochar reactive oxygen species based on FeAl layered double hydroxide for diethyl phthalate degradation10.1016/j.jhazmat.2020.122120 ↗
28. Corrosion-engineered morphology and crystal structure regulation toward fe-based efficient oxygen evolution electrodes10.3390/nano12121975 ↗
29. Rapid synthesis, electrical, and mechanical properties of polycrystalline Fe2AlB2 bulk from elemental powders10.1111/jace.15058 ↗
30. Band bending in semiconductors: chemical and physical consequences at surfaces and interfaces10.1021/cr3000626 ↗
31. Effect of the interlamellar anion on CuMgFe-LDH in solar photo-Fenton and Fenton-like degradation of the anticancer drug 5-fluorouracil
32. X-ray photoelectron spectroscopy of the MAB phases, MoAlB, M2AlB2 (M = Cr, Fe), Cr3AlB4 and their binary monoborides10.1016/j.jeurceramsoc.2019.09.040 ↗
33. Growth of NiAl-layered double hydroxide on graphene toward excellent anticorrosive microwave absorption application10.1002/advs.202002658 ↗
34. Transition metal nitride coated with atomic layers of Pt as a low-cost, highly stable electrocatalyst for the oxygen reduction reaction10.1021/jacs.5b11364 ↗
35. Multiprincipal element M2FeC (M = Ti,V,Nb,Ta,Zr) MAX phases with synergistic effect of dielectric and magnetic loss
36. Broadband and tunable high-performance microwave absorption of an ultralight and highly compressible graphene foam10.1002/adma.201405788 ↗
37. Recent progress of perovskite oxides and their hybrids for electromagnetic wave absorption: a mini-review10.1007/s42114-022-00458-7 ↗
38. MOF-Derived Porous Co/C nanocomposites with excellent electromagnetic wave absorption properties10.1021/acsami.5b03177 ↗
39. Interface engineering to develop heterogeneous spindle-shaped FeS2/NiS2@C nanorods for high-efficient microwave attenuation10.1016/j.carbon.2023.118735 ↗
40. Laminated magnetic graphene with enhanced electromagnetic wave absorption properties10.1039/C2TC00159D ↗
41. Microwave attenuation properties of W-type barium ferrite BaZn2−xCoxFe16O27 composites10.1063/1.1757660 ↗
42. From VIB- to VB-group transition metal disulfides: structure engineering modulation for superior electromagnetic wave absorption
43. Automatic measurement of complex dielectric constant and permeability at microwave frequencies10.1109/PROC.1974.9382 ↗
44. Measurement of the intrinsic properties of materials by time-domain techniques10.1109/TIM.1970.4313932 ↗
45. Lightweight graphene aerogels by decoration of 1D CoNi chains and CNTs to achieve ultra-wide microwave absorption10.1016/j.carbon.2021.01.136 ↗
46. Enhanced microwave absorption performance of polyaniline-coated CNT hybrids by plasma-induced graft polymerization10.1007/s00339-014-8977-z ↗
47. Heterostructure design of hydrangea-like Co2P/Ni2P@C multilayered hollow microspheres for high-efficiency microwave absorption10.1016/j.jmst.2023.09.023 ↗
48. Dielectric properties of fine particles of Fe3O4 and some ferrites10.1143/JJAP.10.1520 ↗
49. From binary to ternary and back to binary: Transition of electromagnetic wave shielding to absorption among MAB phase Ni3ZnB2 and corresponding binary borides Nin+1Bn (n=1, 3)10.26599/JAC.2023.9220812 ↗
50. Synthesis of 3D flower-like ZnO/ZnCo2O4 composites with the heterogeneous interface for excellent electromagnetic wave absorption properties10.1016/j.jcis.2020.10.111 ↗
51. Electromagnetic wave absorption performance of NiCo2X4 (X = O, S, Se, Te) spinel structures10.1016/j.cej.2021.129907 ↗
52. Research progress on electromagnetic wave absorption based on magnetic metal oxides and their composites10.1007/s42114-023-00694-5 ↗
53. Summary of losses in magnetic materials10.1109/TMAG.2002.802741 ↗
54. Hollow Ni/C microspheres derived from Ni-metal organic framework for electromagnetic wave absorption10.1016/j.cej.2019.123207 ↗
55. Microwave magnetic properties of Co50/(SiO2)50 nanoparticles10.1063/1.1484248 ↗
56. Unique electromagnetic properties of the zinc ferrite nanofiber10.1016/j.matlet.2014.03.049 ↗
57. Dipolar-distribution cavity γ-Fe2O3@C@α-MnO2 nanospindle with broadened microwave absorption bandwidth by chemically etching10.1002/smll.201602779 ↗
58. The efficient absorption of electromagnetic waves by tunable N-doped multi-cavity mesoporous carbon microspheres10.1016/j.carbon.2022.10.020 ↗
59. Galvanic replacement reaction involving core-shell magnetic chains and orientation-tunable microwave absorption properties10.1002/smll.202003502 ↗
60. CoNi@SiO2 @TiO2 and CoNi@Air@TiO2 microspheres with strong wideband microwave absorption10.1002/adma.201503149 ↗