journal article·2024-08

Constructing the charge channel with CFx using a well-dispersed carbon nanotube arrays to boost high-rate primary battery

Gaobang Chen, Yong Fan, Muhammad Shoaib, Xinxia Yang, Yifan Liu, Xian Jian

Publisher page

Abstract

Pursuing ultra-high specific energy density for lithium fluorinated carbon (Li/CF x) battery requires a high fluorine to carbon ratio, resulting in low-conductivity and surface-polarization issues, which restricts battery of high-rate performance. Herein, the rich charge transport channels among CF x were constructed using a well-dispersed and highly-oriented carbon nanotube arrays (CNTA) to enhance high-rate performance in Li/CF x battery. The advantage of high-orientation lies in maintaining the appropriate van der Waals forces of this CNTA prepared by catalytic chemical vapor deposition (CCVD), which helps to avoid carbon nanotubes (CNT) entanglement and achieves good dispersion. Compared with conductive additives of commercial carbon nanotubes (CCNT) and super-P (CSP), CNTA effectively releases CF x surface-polarization favouring to Li + diffusion. Therefore, battery performance was enhanced with reduced voltage delay and low impedance. At a discharge rate of 5 C, the Li/CF x battery using CNTA had a specific capacity of 697.32 mAh/g, while these batteries using CCNT and CSP lost discharge-performance. This highly-oriented CNTA enriches the conductive additives system of lithium primary batteries and provides a novel pathway for suppressing CF x polarization.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. High energy density of primary lithium batteries working with sub-fluorinated few walled carbon nanotubes cathode10.1016/j.jallcom.2017.08.001 ↗
2. Composite nanoarchitectonics for efficient lithium storage by encapsulating black phosphorus quantum dots in cobalt/iron based prussian blue analogues10.1016/j.jallcom.2023.172291 ↗
3. Composition and structure design of poly(vinylidene fluoride)-based solid polymer electrolytes for lithium batteries10.1002/adfm.202214432 ↗
4. Boron-based high-performance lithium batteries: recent progress, challenges, and perspectives10.1002/aenm.202300042 ↗
5. Study on life prediction of Li-MnO2 battery
6. Macro-homogenous modeling of commercial, primary Li/MnO2 coin cells10.1149/1.3245867 ↗
7. Characterization of different electrolyte composition lithium thionyl chloride reserve battery by electrochemical impedance spectroscopy10.1149/1945-7111/abff61 ↗
8. Life prediction of lithium thionyl chloride batteries based on the pulse load test and accelerated degradation test10.1002/qre.3144 ↗
9. High-efficiency and high-power rechargeable lithium–sulfur dioxide batteries exploiting conventional carbonate-based electrolytes10.1038/ncomms14989 ↗
10. Solvation structure tuning induces LiF/Li3N-rich CEI and SEI interfaces for superior Li/CFx batteries10.1002/smll.202370413 ↗
11. Fundamentals of Li/CFx battery design and application10.1039/D2EE04179K ↗
12. Research progress in fluorinated carbon sources and the discharge mechanism for Li/CFx primary batteries10.1039/D3TA02425C ↗
13. Boosting the rate performance of primary Li/CFx batteries through interlayer conductive network engineering10.1039/D3TA04102F ↗
14. The modification of natural pyrite and its electrochemical properties in Li/FeS2 batteries10.1142/S1793604713500690 ↗
15. Optimization of multi-walled carbon nanotube based CF electrodes for improved primary and secondary battery performances10.1016/j.jpowsour.2013.12.076 ↗
16. Exploration and application of self-healing strategies in lithium batteries10.1002/adfm.202212821 ↗
17. Fundamentals of Li/CFx battery design and application10.1039/D2EE04179K ↗
18. Accordion-like fluorinated graphite nanosheets with high power and energy densities for wide-temperature, long shelf-life sodium/potassium primary batteries10.1002/smll.202008163 ↗
19. Development of Li/(CFx)n battery at sandia national laboratories for long-lived power sources applications10.1149/1.2992490 ↗
20. The electrochemical performance of fluorinated ketjenblack as a cathode for lithium/fluorinated carbon batteries10.1039/D1RA03873G ↗
21. Composite cathode materials for next-generation lithium fluorinated carbon primary batteries10.1016/j.jpowsour.2022.231716 ↗
22. Fluorination of two-dimensional graphene: a review
23. Plasma-enhanced fluorination of layered carbon precursors for high-performance CFx cathode materials10.1016/j.jallcom.2023.168998 ↗
24. Fluorinated multi-walled carbon nanotubes as cathode materials of lithium and sodium primary batteries: effect of graphitization of carbon nanotubes10.1039/C8TA12074A ↗
25. Fluorination methods and the properties of fluorinated carbon materials for use as lithium primary battery cathode materials10.1016/j.jiec.2022.03.044 ↗
26. Fluorinated carbonaceous nanoparticles as active material in primary lithium battery10.1016/j.jfluchem.2018.12.007 ↗
27. Applications of carbon nanotubes in CFx electrodes for high-power Li/CFx batteries10.1557/adv.2016.51 ↗
28. High-rate performance of fluorinated carbon material doped by phosphorus species for lithium-fluorinated carbon battery10.1002/ente.202200155 ↗
29. A novel one-step method to prepare N, S Co-doped sub-fluorinated carbon electrode materials for ultrahigh-rate lithium-fluorinated carbon battery10.1016/j.jpowsour.2022.232188 ↗
30. Surface engineering of fluorinated graphene nanosheets enables ultrafast lithium/sodium/potassium primary batteries10.1002/adma.202303444 ↗
31. Conductive carbon-wrapped fluorinated hard carbon composite as high-performance cathode for primary lithium batteries10.3390/coatings13050812 ↗
32. High-rate performance of fluorinated carbon material doped by phosphorus species for lithium-fluorinated carbon battery10.1002/ente.202200155 ↗
33. Excellent electrochemical properties of graphene-like carbon obtained from acid-treating natural black talc as Li-ion battery anode10.1016/j.electacta.2018.09.079 ↗
34. Constructing carbon-decorated CFx nanocapsule by atomic layer deposition and catalytic chemical vapor deposition for high-capacity lithium primary battery10.1016/j.apsusc.2022.153570 ↗
35. Toward the high-performance lithium primary batteries by chemically modified fluorinate carbon with δ-MnO210.1002/smll.202300762 ↗
36. Ultralow-temperature Li/CFx batteries enabled by fast-transport and anion-pairing liquefied gas electrolytes10.1002/adma.202207932 ↗
37. Bifunctional carbon monofluoride (CFx) coating on a separator for lithium-metal batteries with enhanced cycling stability10.1016/j.jelechem.2020.114586 ↗
38. Semi-ionic C-F bond enabling fluorinated carbons rechargeable as Li-ion batteries cathodes10.1016/j.jcis.2023.06.108 ↗
39. Fabrication of screen-printed electrodes modified by hydrothermal MnO2 microflowers and carbon for electrochemical sensors in copper ions detection
40. A porous wrinkled graphitic carbon as corrosion-resistant carbon support for durable fuel-cell catalysts10.1002/admt.202300389 ↗
41. Highly sensitive electrochemical determination of isoproturon based on acetylene black nanoparticles modified glassy carbon electrode10.20964/2022.06.74 ↗
42. Research on the utilization of ultra-long carbon nanotubes in lithium-ion batteries based on an environment-friendly society10.1007/s11356-023-26309-6 ↗
43. Symmetrical growth of carbon nanotube arrays on FeSiAl micro-flake for enhancement of lithium-ion battery capacity10.1016/j.carbon.2021.12.033 ↗
44. Aligned, high-density semiconducting carbon nanotube arrays for high-performance electronics10.1126/science.aba5980 ↗
45. Modeling and characterization of carbon nanotube agglomeration effect on electrical conductivity of carbon nanotube polymer composites10.1063/1.4902175 ↗
46. Carbon nanotube agglomeration effect on piezoresistivity of polymer nanocomposites10.1016/j.polymer.2014.08.054 ↗
47. A physics investigation for influence of carbon nanotube agglomeration on thermal properties of composites10.1016/j.matchemphys.2019.121777 ↗
48. Carbon nanotube arrays and their composites for electrochemical capacitors and lithium-ion batteries10.1039/b906812k ↗
49. Design of quadruple-layered metal oxides/nitrogen, oxygen-doped carbon nanotube arrays as binder-free electrodes for flexible lithium-ion batteries10.1016/j.electacta.2020.137201 ↗
50. High lithiophilic nitrogen-doped carbon nanotube arrays prepared by in-situ catalyze for lithium metal anode10.1016/j.cclet.2020.12.056 ↗
51. Surface engineering based on in situ electro-polymerization to boost the initial coulombic efficiency of hard carbon anode for sodium-ion battery10.1007/s12598-021-01893-z ↗
52. Effective ion pathways and 3D conductive carbon networks in bentonite host enable stable and high-rate lithium–sulfur batteries10.1515/ntrev-2021-0005 ↗
53. Raman spectroscopy of carbon materials and their composites: Graphene, nanotubes and fibres10.1016/j.pmatsci.2023.101089 ↗
54. Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
55. Highly oriented fluorinated carbon nanotube arrays for high specific capacity lithium primary battery10.1016/j.jallcom.2022.166452 ↗
56. Effects of nanostructure and coating on the mechanics of carbon nanotube arrays10.1002/adfm.201503673 ↗
57. A N/Co co-doped three-dimensional porous carbon as cathode host for advanced lithium–selenium batteries10.1007/s12598-023-02273-5 ↗
58. Effective ion pathways and 3D conductive carbon networks in bentonite host enable stable and high-rate lithium–sulfur batteries10.1515/ntrev-2021-0005 ↗
59. Ultrafast Li/fluorinated graphene primary batteries with high energy density and power density10.1021/acsami.1c02064 ↗
60. Perspective on carbon nanotubes as conducting agent in lithium-ion batteries: the status and future challenges10.1007/s42823-022-00449-0 ↗