Tuning the overcharge resistance of metal hydride electrodes by trace Nb-doping for aqueous batteries
Source abstract
Abstract
Metal hydride electrodes have been widely used in alkaline aqueous batteries due to their merits of good comprehensive performance, high safety, and environmental benignity. However, their further development is hindered by poor overcharge resistance and limited cycle stability at elevated temperatures. Herein, we describe the preparation of La 0.68Ce 0.30-xZr 0.02Nb xNi 4.16Co 0.36Mn 0.30Al 0.38 ( x = 0, 0.025, 0.05) metal hydride electrodes with high standard potential, bulk modulus, and hydrogen adsorption energy by doping with Nb. Combined experimental and theoretical results have indicated that Nb occupies B-sites in the AB 5 structure and that its presence promotes H* formation and inhibits H 2 formation by increasing the overpotential. Nb-doping improves the cycle stability of metal hydride electrodes at 50 °C by imparting resistance to pulverization and corrosion, and significantly improves the overcharge resistance performance by increasing the overpotential. Therefore, such metal hydride electrodes can be expected to display overcharge resistance at elevated temperature when deployed in aqueous batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Advanced battery technologies research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Hamamelis-like K2Ti6O13 synthesized by alkali treatment of Ti3C2 MXene: catalysis for hydrogen storage in MgH210.1021/acssuschemeng.9b06936 ↗
2. Refined alteration of active sites via O modification on CoP/Co2P@Carbon hetero-structural catalyst for hydrogen generation10.1016/j.apcatb.2022.122324 ↗
3. Wide temperature cycling of Li-metal batteries with hydrofluoroether dilution of high-concentration electrolyte10.1016/j.cej.2021.131889 ↗
4. A retrospective on lithium-ion batteries10.1038/s41467-020-16259-9 ↗
5. Research progress on high-temperature resistant polymer separators for lithium-ion batteries
6. Temperature mitigation effect of phase change material on overcharging lithium-ion batteries: an experimental study10.1007/s10973-021-10875-3 ↗
7. Shape-stable and fire-resistant hybrid phase change materials with enhanced thermoconductivity for battery cooling
8. Manipulating crystallographic orientation of zinc deposition for dendrite-free zinc ion batteries10.1002/aenm.202101299 ↗
9. A stable, non-corrosive perfluorinated pinacolatoborate mg electrolyte for rechargeable mg batteries10.1002/anie.201902009 ↗
10. A low-cost and air-stable rechargeable aluminum-ion battery10.1002/adma.202106511 ↗
11. Lota, Electrochemical properties of modified negative electrode for Ni-MH cell, Curr. Appl
12. Temperature performance of AB5 hydrogen storage alloy for Ni-MH batteries10.1016/j.ijhydene.2016.04.015 ↗
13. The mechanism of suppressing capacity degradation of high-Al AB5-type hydrogen storage alloys at 60 °C10.1016/j.ijhydene.2015.10.070 ↗
14. Theoretical model on the electronic properties of multi-element AB5-type metal hydride10.1016/j.ijhydene.2020.12.170 ↗
15. Improvement in high-temperature performance of Co-free high-Fe AB5-type hydrogen storage alloys10.1016/j.ijhydene.2012.05.147 ↗
16. The high-temperature performance of low-cost La-Ni-Fe based hydrogen storage alloys with Si substituting10.1016/j.ijhydene.2016.06.206 ↗
17. metal hydride electrode with overcharge resistance and wide temperature performance for aqueous rechargeable batteries10.1016/j.scriptamat.2022.114827 ↗
18. Principle of Corrosion
19. Microstructure, mechanical properties, and corrosion behavior of ultra-low carbon bainite steel with different niobium content10.3390/ma14020311 ↗
20. Kittle · 1996
21. Computational high-throughput screening of electrocatalytic materials for hydrogen evolution10.1038/nmat1752 ↗
22. Effect of Ce content on structure and electrochemical properties of La0.8-xCexPr0.1Nd0.1B5 (B = Ni, Co, Mn; 0 ⩽ x ⩽ 0.3) hydrogen storage alloys10.1134/S1023193515090074 ↗
23. Characterization of corrosion products of AB5-type hydrogen storage alloys for nickel-metal hydride batteries10.1149/1.1393159 ↗
24. Effect of Sm on performance of Pr/Nd/Mg-free and low-cobalt AB4.6 alloys in nickel-metal hydride battery electrode10.1016/j.jallcom.2020.154530 ↗
25. Strategy of manipulating La/Ce ratio to develop metal hydride electrode with excellent capacity even at -40 °C10.1016/j.jpowsour.2022.231817 ↗
26. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
27. Calibration of the DFT/GGA+u method for determination of reduction energies for transition and rare earth metal oxides of Ti, V, Mo, and Ce10.1021/ct200202g ↗
28. Theoretical investigation of V2xFe2(1-x)Zr and ScxY1-xFe2 (0<x<1) quasi-binary alloy: stable structures, mechanical and electronical properties10.1016/j.physleta.2020.126658 ↗
29. First-principles study of the electronic structure and transport properties of armchair graphene nanoribbons with adsorbed super-halogen LiF2 and super-alkali Li3 clusters10.1016/j.physleta.2020.126569 ↗
30. Shape control in concave metal nanoparticles by etching10.1039/C7NR03889E ↗
31. Investigation of adsorption, dissociation, and diffusion properties of hydrogen on the V (100) surface and in the bulk: a first-principles calculation10.1016/j.jare.2019.09.003 ↗
32. Influence of element substitution on structural stability and hydrogen storage performance: a theoretical and experimental study on TiCr2-xMnx alloy10.1016/j.renene.2022.07.113 ↗
33. Corrosion of conductive polypyrrole: Effects of environmental factors, electrochemical stimulation, and doping anions10.1016/j.corsci.2012.04.013 ↗
34. Structural phase transformation and electrochemical features of La-Mg-Ni-based AB4-type alloys10.1016/j.electacta.2016.08.089 ↗
35. Theory of chemical kinetics and charge transfer based on nonequilibrium thermodynamics
36. Role of surface oxygen vacancies and lanthanide contraction phenomenon of Ln(OH)3 (LnLa, Pr, and Nd) in sulfide-mediated photoelectrochemical water splitting10.1021/acsomega.8b00429 ↗
37. XPS characterisation of in situ treated lanthanum oxide and hydroxide using tailored charge referencing and peak fitting procedures10.1016/j.elspec.2011.04.002 ↗
38. Study of CeO2 XPS spectra by factor analysis: Reduction of CeO2, Surf. Sci
39. Characterization of α-Ni(OH)2 by XPS10.1116/1.1247754 ↗