journal article·2024-06

Enhanced mechanical properties of magnesium alloy reinforced by layered Ti3AlC2 MAX phase fabricated by SPS at a near solidus temperature

Ameur Chouket, Pierre Montmitonnet, Krystal Frances, Christophe Pradille, Radosław Chmielowski, Imène Lahouij

Publisher page

Abstract

International audience ; Powder metallurgy stands out as a highly promising and versatile method for manufacturing particle-reinforced metal matrix composite (MMCs) as compared to other fabrication processes. This method ensures excellent binding between the matrix and reinforcement, uniform microstructure, and effectively prevents the formation of undesirable phases. In this study, magnesium alloy (AZ91) metal matrix composites (MMCs) reinforced with 0–30 vol% of Ti3AlC2 MAX phase were prepared by Spark Plasma Sintering (SPS) from powders at temperature close to the solidus. Ti3AlC2 is a member of the MAX phases which are known for their layered structure, machinability and being ternary carbides. The latter was synthetized from pure components (Ti, TiC and Al) using insulated SPS technology at high temperature. Sintered composites reached quasi-full density, as measured by Archimedes’ method. Their microstructure has been assessed by SEM and X-ray diffraction (XRD) respectively. Mechanical properties in relationship with the microstructure of all composites were carefully investigated. The experimental compressive tests data were extracted to obtain true strain-true stress curves. Vickers hardness (HV1), ultimate compressive strength (UCS) and conventional yield strength (0.2%YCS) increase with an increasing fraction of Ti3AlC2 in the composites and compare favorably with literature. SEM observations of fracture surfaces after compression tests seem to show that cracks initiate in both Ti3AlC2 clusters and α-Mg/MAX interfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Lightweight design of carbon twill weave fabric composite body structure for electric vehicle10.1016/j.compstruct.2012.09.052 ↗
2. Strength, stiffness, and panel peeling strength of carbon fiber-reinforced composite sandwich structures with aluminum honeycomb cores for vehicle body10.1016/j.compstruct.2017.10.038 ↗
3. Optimal lightweight material selection for automobile applications considering multi-perspective indices10.1109/ACCESS.2018.2804904 ↗
4. M. Hardouin et M. Scheidecker, Magnésium, Encyclopedia Universalis. 〈https://www.universalis.fr/encyclopedie/magnesium/2023〉 (accessed 11 septembre 2023).
5. Rentsch · 1975
6. Magnesium and magnesium alloys
7. Neite · 1996
8. A highly accurate methodology for the prediction and correlation of mechanical properties based on the slimness ratio of additively manufactured tensile test specimens10.1007/s10853-020-04654-y ↗
9. Davis · 1993 · 3
10. Wood · 1972
11. Material properties database, ASTM A36 (SS400, S275) Structural Carbon Steel. 〈https://www.makeitfrom.com/material-properties/ASTM-A36-SS400-S275-Structural-Carbon-Steel/2023〉 (accessed 21 June 2023).
12. High temperature damping behavior of as-deformed Mg matrix influenced by micron and submicron SiCp10.1016/j.msea.2014.11.069 ↗
13. Magnesium casting technology
14. Controlling the ignition and flammability of magnesium for aerospace applications10.1016/j.corsci.2014.04.047 ↗
15. Surface metal matrix nano-composite of magnesium/hydroxyapatite produced by stir-centrifugal casting10.1016/j.surfcoat.2020.126654 ↗
16. Influence of boron carbide content on dry sliding wear performances of AZ91D magnesium alloy10.1177/13506501221109033 ↗
17. Microstructure, mechanical and ignition characteristics of Si3N4 reinforced magnesium matrix nanocomposites10.3390/app12126138 ↗
18. Mechanical and corrosion properties of graphene nanoplatelet–reinforced Mg–Zr and Mg–Zr–Zn matrix nanocomposites for biomedical applications10.1016/j.jma.2021.05.011 ↗
19. Research for a “new age of magnesium” in the automotive industry10.1016/S0924-0136(01)00780-4 ↗
20. Effect of submicron size SiC particulates on microstructure and mechanical properties of AZ91 magnesium matrix composites10.1016/j.jallcom.2010.05.159 ↗
21. Microstructure, and microhardness of SiC nanoparticles reinforced magnesium composites fabricated by ultrasonic method10.1016/S0921-5093(04)00936-0 ↗
22. Mg/TiC composites manufactured by pressureless melt infiltration10.1016/j.scriptamat.2004.04.007 ↗
23. Processing of B4C particulate-reinforced magnesium-matrix composites by metal-assisted melt infiltration technique10.1016/j.jmst.2014.06.005 ↗
24. Influence of TiC content on mechanical, wear and corrosion properties of hot-pressed AZ91/TiC composites10.1177/0021998319860570 ↗
25. First-principles study of vacancies in Ti3SiC2 and Ti3AlC210.3390/ma10020103 ↗
26. A first-principles investigation of the phase stability of Ti2AlC with Al vacancies10.1016/j.scriptamat.2007.09.048 ↗
27. On the chemical diversity of the MAX phases10.1016/j.trechm.2019.02.016 ↗
28. Synthesis and characterization of Ti3AlC210.1111/j.1151-2916.2000.tb01281.x ↗
29. Effect of ECAP on the mechanical properties of Mg-Al2O3 nanocomposites
30. Evaluation of physical and mechanical properties of AZ91D/SiC composites by two step stir casting process10.1016/j.jma.2014.12.008 ↗
31. R. Chmielowski, G. Larramona, B. Delatouche, D. Pere, MXene compound having novel crystalline morphology, and process for fabricating a compound of MAX phase type for synthesis of said MXene compound, (2023), WO: 2023/057906.
32. High Performance metal/carbide composites with far-from-equilibrium compositions and controlled microstructures10.1038/srep35523 ↗
33. Microstructural, mechanical and tribological properties of Al matrix composites reinforced with Cu coated Ti3AlC210.1016/j.jallcom.2016.08.175 ↗
34. Powder metallurgy processing and compressive properties of Ti3AlC2/Al composites10.1016/j.msea.2011.09.068 ↗
35. Spark plasma sintering as advanced PM sintering method10.1179/003258902225007041 ↗
36. Sintering consolidation reaction and crystal growth by the spark plasma system (SPS)10.1016/S0921-5093(00)00773-5 ↗
37. A review of multi-physical fields induced phenomena and effects in spark plasma sintering: fundamentals and applications10.1016/j.matdes.2020.108662 ↗
38. Experiments and modeling of spark plasma sintered, functionally graded boron carbide–aluminum composites10.1016/j.msea.2007.11.054 ↗
39. Boron nitride nanotubes reinforced aluminum composites prepared by spark plasma sintering: microstructure, mechanical properties and deformation behavior10.1016/j.msea.2013.03.022 ↗
40. Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite10.1016/j.msea.2019.03.037 ↗
41. Fabrication and mechanical properties of pressureless melt infiltrated magnesium alloy composites reinforced with TiC and Ti2AlC particles10.1016/j.msea.2014.09.039 ↗
42. The effect of matrix to reinforcement particle size ratio (PSR) on the microstructure and mechanical properties of a P/M processed AlCuMn/SiCp MMC10.1016/j.msea.2004.04.040 ↗
43. The Al−Mg (Aluminum−Magnesium) system10.1007/BF02873413 ↗
44. Correlation between nanoindentation and tensile properties Influence of the indentation size effect10.1016/S0921-5093(03)00563-X ↗
45. Characterization of Silicon Carbide Reinforced Aluminum Matrix Composites10.1016/j.proeng.2014.11.821 ↗
46. Evaluation of mechanical properties of aluminium alloy (Al-2024) reinforced with Molybdenum Disulphide (MOS2) metal matrix composites10.1016/j.mspro.2014.07.189 ↗
47. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets10.1016/j.mser.2013.08.001 ↗
48. Development of SiCp/AZ91 magnesium matrix nanocomposites using ultrasonic vibration10.1016/j.msea.2012.01.112 ↗
49. Hot extrusion of SiCp/AZ91 Mg matrix composites10.1016/S1003-6326(11)61407-6 ↗
50. Influence of Ti3AlC2 ceramic particles in AZ91 alloy: produced by melt infiltration method10.1007/s12666-021-02185-x ↗
51. Microstructure, mechanical properties and fracture mechanism of Ti2AlC reinforced AZ91D composites fabricated by stir casting10.1016/j.jallcom.2017.01.231 ↗
52. Microstructural, mechanical and tribological properties of Al matrix composites reinforced with Cu coated Ti3AlC210.1016/j.jallcom.2016.08.175 ↗
53. Investigation of microstructure, mechanical and wear behavior of B4C particulate reinforced AZ91 matrix composites by powder metallurgy